☁️ Throwing a cloud cup in porcelain

History culture hero
16 followers
4 Video Views·Aug 21, 2025
In this video, I'm going to go through the process of making this cup from beginning
to end.
It all starts with dirt, of course.
I typically use about 600 grams of clay for one of these cloud cups.
How much clay you use really does depend on your throwing style, how thin you throw your
cups, all of that.
I've got this cup on a tile bat, and so it will dry and pop right off.
So I leave a smaller bottom on it than I would if I had to wire it off of the bat.
After you've centered and opened your clay, you want to compress the bottom so that you
don't get any cracks down there and so that it's nice and smooth.
Then the first thing I do is even out the walls a bit, and that's really what you're
seeing here in this pull.
It's not so much raising the walls as it is just evening things out so that as I do the
rest of the work, the pulls are smooth and even.
As I opened the piece, it came a little bit off center, so that's you're seeing me just
kind of try and stabilize that again here.
To pull the clay up, sometimes I use a sponge, sometimes I don't.
Pulling the clay up is a really slow process, actually.
It doesn't feel this slow when you're doing it, but I think social media has really warped
our idea of how quick and how easy things should be.
So especially for beginner potters, I think it's great to have videos that really show
the process as it is in real time, and that's what you've got in this video.
At the top of most pulls, I'll tidy the top up a little bit, that top rim, compressing
it on all three sides.
It doesn't need to be done absolutely every time, I find, but it is important to keep
control of that top rim so that it doesn't become uneven or too narrow, too thin.
You see on that pull, I released too quickly up at the top, and there's a little bit of
a wobble there.
That's okay, I'll fix that, but that is why you want to be really steady when you're
doing your pulls, especially at the top, and just smoothly release the pull at the top
of the cup.
So with this pull, I'm starting to open up the shape a little bit to get it closer to
the final product, because we're really, in terms of the size, we're pretty much there
at this point.
Those little chunky bits are just kind of artifacts from my nails, sometimes little
bits of clay get pulled up.
And again, compressing the rim.
I'm cleaning out the water and slip inside the cup, and then I reuse that slip.
Because this is porcelain, and you want to use slip more than water, it gets waterlogged
really easily.
So from here on out, the work that I'm doing is to even out the walls.
You'll notice that the cup doesn't really get any taller, maybe a little bit, but really
what I'm after is a nice even wall.
It's especially important in these cups because with the shape of them, you really can't trim
them after they're thrown.
You trim a little bit of a foot into them, but that's about it.
So if I leave the walls bottom heavy or thicker on the bottom than they are on the top, then
that's the way the cup will be when it's finished.
That doesn't really feel great when you're using the cup.
One of the things I love about these cups is that they feel so good in the hand.
It feels like you're holding a cloud, which is why I call them a cloud cup.
Got the slip again out, and you can see that I've touched the rim there.
That's okay.
Tidy that up.
The next thing to do is to clean off the slip with a metal rib, and I made a mistake here.
I should have done the outside before the inside, because to do the outside, you really
need to put your fingers on the inside to give the rib something to press against.
Otherwise, you're going to distort the shape that you've thrown.
Once I've cleaned the slip off of the inside, my fingers stick because there's no slip there.
So if you're going to try this at home, clean the slip off the outside first.
And it seems counterintuitive to clean all the slip off, and then you'll see the next
step is to put water back on the cup.
But the slip really holds the water onto the clay more so than the fresh water does, and
cleaning the slip off creates a nice smooth surface.
Whereas if you leave the slip on there, you get a more rough surface, and I prefer that
nice smooth surface.
Here I'm trimming the skirt of clay off of the bottom of the cup.
That tidies it up and prepares it for the trimming that will happen after the cup is
dry.
So here's the water that I was talking about, and then this is the fun part of this cup.
This moment right here is why I make these cups.
So you've got one finger on the outside, two fingers on the inside, and you're just
moving up the cup a little bit faster than the wheel is turning.
So it does take some practice to get it just right, and every cloud cup that I throw is
a little bit different.
They're certainly not all exactly the same.
So this is it.
The throwing is done.
I'm just tidying things up and getting as much water as I can off of there so that it
will dry quickly.
Being really gentle on the inside so that I don't disturb the spiral that I just put
into the cup.
One thing that I'm really careful with is the rim of the cup.
I like for the rim to be very evenly round.
I think it just makes for a more polished end product.
Trimming these cups is super simple.
I don't put a deep foot into them.
I just smooth them off a bit, basically.
What is tricky with trimming these is getting the things centered.
I use a Giffen Grip because I despise tap centering, but this is one of those occasions
when the Giffen Grip isn't necessarily the best product to use, or the best way, I guess,
to use to hold these on the bat.
But I'm a creature of habit.
So I go in with the Mud Tools Scraper, I think it's called.
Some people call them a Sureform.
Anyway, it's just a nice easy way to clean off the extra clay and make it even.
These are especially good if you've got a ton of extra clay you need to get rid of.
Then it's going in and smoothing things out.
And I do carve out a little bit underneath the bottom.
I think most of the time I prefer not to have a completely flat bottom.
I just think it adds a little something extra.
You know, if you're looking at the foot of your pot, you see some care and attention
has been given to it.
Here I'm using a Diamond Core Tool.
I have been accused of being fastidious in my throwing, which is a very nice way of saying
that it takes me forever to make something because I absolutely sweat the details.
And the last part of trimming this, very important, is to smooth it out a bit.
So by compressing it, I'm using wood here.
I'm using the end of the Diamond Core Tool.
There's all sorts of ways you can do this.
It just happens to be the easiest one for this particular shape of cup.
This creates a really nice smooth surface when it's fired.
I do still sand the bottoms after they come out of the kiln,
but it's a much easier process if I've done this.
Then it's fired.
I skipped that process in the video.
So you put it into the kiln, you do your bisque firing, and then it's time to glaze.
I'm putting Amaco Snow Celadon on the inside.
It's just a nice white glossy liner glaze.
I like to have a light colour inside my cups if I can.
It makes it easier to see when you're pouring things into it.
I fill up the inside because I am going to put a different colour on the outside.
The most important part of this process is to set up your camera
so that your viewers can't see what you're doing.
Very important, critical part of the process.
In all seriousness, I'm just rotating the cup and pouring that out,
trying to make sure that I get an even distribution of the glaze as I'm pouring it out.
And then I dip the rim, not because I want the outside of the rim
necessarily to have the glaze on it,
but because that pouring method doesn't get quite enough glaze on the rim of the cup.
I'm putting Mako Celadon Bloom on the outside of this one.
And this glaze is a crystal glaze.
Mako recommend that you pour it out onto a plate
so that you can pick up the crystals a little bit more easily.
And indeed, that does work well.
I am fast forwarding the glazing.
With brush glazing, it is...
It's a long process, not gonna lie.
So, you know, if you're brush glazing, it's gonna take a while.
With brush on glazes, I will typically do three coats.
It depends on the glaze.
So you really do need to test and make sure that you know
what your glaze needs in order to produce the best results.
And my little helper in the background there.
And there we have it.
Three coats of glaze.
Once again, it goes in the kiln.
And here's the finished result.
I think it's absolutely beautiful.
It did crawl in a couple of places,
but with the design of the cup and the glaze,
it's actually kind of a neat effect.
And so there it is, a cloud cup in celadon bloom and snow.
Thanks for watching.
