How To Ride Downhill Sections On An XC Bike

RockShades
98 followers
#sport #travel #running #marathon #cycling #bicycle #training #race #triathlon #swim #bike #run #adventure #inspire
Oh, hello and welcome, everyone. Now, who doesn't love an exhilarating white-knuckle
ride on an XC bike down a hill? I know I certainly do, but sometimes it can get pretty wild, right?
I thought it was about time we brushed up on some downhill skills on our cross-country bikes.
Right, let's kick this video off in a positive way, as we should always.
Now, you don't have to be purely on an XC bike for these points to be applicable. You can be on
any bike, of course, as I said. As always, don't forget, like and subscribe to the channel,
and our memberships are now live as well, people. If you fancy showing some love,
that's a great way to do it. We're going to dive in with the dropper post.
Now, not all of us have a dropper post on our cross-country bikes or our bikes in general,
but for those of us that do, really want to make sure that thing is dropped every time
you're going downhill. I all too often see in the bike parks, people with a,
well, with it up, trying to go downhill, and they're really struggling.
If your saddle is up really high, you're going to struggle to maneuver around on the bike,
get your weight back properly. You'll actually see here in this clip, I was riding with it up,
and my chest is literally resting on the saddle because of the height of it. It's going to make
life just much more difficult. There's a couple of reasons, though, that I do always see people
with it up. First and foremost, people just forget. I get it, especially off the top of
an uphill climb. You just drop straight in. You're like, oh, no, fiddlesticks. I got to
press the button. Fiddlesticks, my dropper. Then you're trying to frantically press it.
Another one is in a bit of a more intense situation. It might be a race or something
like that. You're just so focused and in the zone that actually when you're flat out redlining and
you're suddenly hit with a descent, the last thing you always think about sometimes is pushing the
button and dropping that seat down as well. Regardless of the scenario, if you're pointing
down, your seat should be down. Let's go. I love this section. Onwards. Fiddlesticks,
my dropper. Oh, God. Stay alert, people. XC bikes, when going down, can be fickle, skittish
beasts, which can throw you offline or off-bike in a moment's notice. The key is to stay loosey-goosey,
people. Yes, you want to stay nice and relaxed by tensing up and riding really tight. You're
not really going to allow the bike to dance around and move underneath you, which is what it naturally
wants to do a lot of the time. In my eyes, manhandling an XC bike never goes particularly
well either, especially if it's wet and slippery conditions. The aggressive riding position,
slicker tires, and less suspension really don't like being forced into doing things that they
don't want to do. It comes back to the mantra of staying loosey-goosey. Let the bike find the path
of least resistance underneath you and that's going to get you down, I think, in the most
successful way possible. Let's talk about line choice now. Just because XC bikes have become
more capable doesn't mean you can ride them or treat them or hit the same lines as what you could
on a trail bike or an enduro bike, certainly not a downhill bike. This is a classic section for us
here at the Forest of Dean. I've hit this many a time on many bikes, actually, but on an enduro
bike, the line I would choose here is basically just plowing straight through the middle and
dropping off onto the road at the end there across all these big off-camber matted routes.
Now, when it comes to riding an XC bike, I can do the same line, as you'll see here,
but it is slower, in my opinion, than actually choosing a slightly longer,
smoother line like you can see here. Essentially, the difference is because, obviously,
this line here, this main central line is very chunky. It's dry at the moment, which,
thank goodness, because hitting it in the wet would almost be unrideable due to slicker tires,
less suspension. You just have to potter through it. When you're pottering through off-camber
routes, it generally doesn't go through very well. What you can actually do is,
without having to brake hard, you can carry speed around the top line. It sets you up still pretty
nice for the drop onto the road. It's generally going to be a bit safer as well. You've got to
think about that, actually. Hitting gnarly lines on XC bikes does have an inherent risk to it,
either punctures, damaging wheels, bottoming out, not even being able to slow down enough,
or you've got to slow down so much that, actually, it's not faster at all.
Now, remember, when you are choosing the right line to take, or hopefully the right line to
take when you're riding downhill on your XC bike, there's a few things to think about. Now, you've
got risk versus reward, and you've got smoother or rougher lines. Obviously, if I hammer through
that maybe rougher line, they go hand-in-hand a lot of the time. Am I going to do any damage?
Is it actually going to be faster? In the long run, because generally, XC rides are also very
long, you've got to think about fatigue as well. It's all very good hammering through this bit,
as I would on an enduro bike with 170 mil of travel. If you were to do this constantly on
a smaller bike, maybe, yes, it can be done a lot of the time, but it's flipping fatiguing,
both on mind and body. All these things you want to weigh up. I'd say a lot of the time,
the faster line is often the smoother. Holy moly. This seems like a good point
to talk about braking points. How does braking change then when you're
descending on a cross-country bike? Well, I've come to another old faithful section here,
one that I must have hammered it through a gazillion times on an enduro bike. Now,
on an enduro bike, you'll have a little dab of the brakes to begin with to maybe scrub a touch of
speed, and then you can go all the way through and brake hard for the left-hander you can see
at the very end. You can't do this as much on an XC bike. When you're going really hard,
especially into a section where there's a sudden change in pace, you've got to remember that, one,
you haven't got the grip, so you can't brake really, really late and get the same traction.
Your braking is going to have to be much more gradual. There's another reason for this as well.
XC brakes aren't as powerful as their enduro or downhill counterparts, single-pot brakes
instead of four-pot. Generally, you're running smaller discs, maybe 160 front and rear,
180 at the front, 160 mil rotors. Because of this, you have to think that your braking points
become slightly earlier, and you have to be much more gradual on those brakes. You can't just
grab a handful and expect to slow down really quickly. Because of this kind of braking and
not being able to just grab handfuls and slow down really quick, you've got to think about
modulation as well, so how hard you pull the brakes or how you feather those brakes if you
like. On steeper, turnier sections, turnier? There's a word for you. On steeper, more technical
sections like this, especially where it's a bit wet and damp, if you're really grabby on the brakes,
you can cause, because of the slicker tires, lockups on the front or the back. Now, remember,
if you lock the back up, it's kind of controllable. If you lock the front up, especially in a muddy
turn, wet patch like this, that front end's going to go. You've really got to feather those brakes
a little bit. Last, but by no means least, this is a more winter-specific one. In the summer,
I run organic pads in my brakes. Actually, I switched them out to sintered in the winter.
It just gives a more consistent feel. They last a little bit longer as well and give
slightly better braking performance. Now, let's talk about bike setup.
Cross-country bikes obviously have to go up and down, so setting your bike up specifically for
either one or the other is always going to be tricky. However, there are some things that we
can do to our bikes to make them favorable on the downhills, and those things are lockout.
It goes without saying, if you're riding downhill, ideally, you always want your suspension to be
unlocked or in its softest position. That way, you're going to have the most comfortable ride,
you're going to absorb the most hits, and you're hopefully going to go the quickest.
Now, we'll talk about tires, pressures, and setup, if you like, front and rear here as well. If you
are favoring the downs, one, you might look at ever so slightly thicker cased tire. We've got
the Vittoria Mezcals on here in an XC race casing and compound. They do an XC trail as well, which
is a slightly thicker version, essentially. Same tread pattern, just slightly thicker.
If you find yourself wanting that extra security, that is a route you could go down. What I like to
do actually really is to keep the same XC race tire, but I actually run an insert, so it offsets
that. I use the Vittoria airliner on the inside of there, the XC race one. What that does is it
negates the weight, if you like, but actually gives me that protection on impacts on the rim
and pinch puncturing the tire as well. Pressures-wise, you might want to think
about bumping it up a couple of PSI. My go-to kind of pressure is on the XC bike,
a 21 PSI on the front, 23 PSI out back. Bar is on screen now. If it is a much more downhill heavy
ride or certainly a downhill heavy loop race, whatever that I'm doing, I may tend to go up a
little bit there, unless the weather dictates it's really horrible and muddy, which case I'll
probably keep it the same. Well, there we go. Some top tips to hopefully get you descending
better on your cross-country bikes or any bike for that matter. Let me know what you think in
the comments down below. Don't forget, like and subscribe to the channels. Our memberships are
now live as well. Don't forget, get on involved in the comments as well. We've got a couple of
different tiers involved for you. Thank you very much for watching, everyone. Until next time,
see you.
