When Is a Rifle Not a Rifle? The Sealed Pattern Baker

Military Rifle History
1 follower
3 Video Views·Aug 7, 2025
Discover the story behind the Sealed Pattern Baker rifle with firearms expert Jonathan Ferguson. Go behind the scenes to see how this historic weapon fits into the broader evolution of military firearms. Watch combat demonstrations, experience thrilling jousting displays, and meet the experts bringing the collection to life.
Hi guys, Jonathan here again in the room full of guns to present you with another interesting
historic firearm. We have got two on the table as we sometimes do, that's for comparison purposes.
The real star of the show is this one and for those of you following along over on social media
by now you'll have realized for sure what it is that we were showing you. It's a Baker rifle but
as you will notice from me showing you this right now, it's not a conventional Baker rifle. It
hasn't got any sight on the barrel here, pretty critical for aiming a rifle and we'll show you
up close but there is in fact no rifling in this bore. It's a completely smooth bore unsighted
Baker rifle. Now for those of you who aren't super familiar with the Baker, just before I move on,
let me show you, I was going to say real Baker, they're both real Bakers but in different ways
as I will explain but there is that sight, this is a later pattern as I will shed a bit of light
on in a minute but that is a notch type rear sight and front sight, little brass blade on the front
there and it's got some pretty chunky looking deep rifling that we can show you there. So this
is one of the many variations on the famous British Baker infantry rifle. So this was
issued on a sort of regimental level basis from 1800 so it's not for every infantryman by any
means, it's a specialist weapon for light infantry tactics. Plenty of other videos that go into
depth on the significance of the Baker. We're here for this particular example. So what on earth am
I going on about a smooth bore Baker with no sights? Well and I suppose I should immediately
firstly address there are smooth bore Baker replicas, reproductions out there, those are for
legal ease if you like, those are for people in the UK perhaps elsewhere
to own on a shotgun certificate because a smooth bore gun is easier to own and that's
for reenactment purposes so you can shoot a blank charge out of those things, put it on the
wall or something if it hasn't, different flavours of that as well, we won't get into that. Suffice to
say there are Bakers that are smooth bore but they have the sights on them because they're
meant to look the part, they have to look like a real Baker. That's very much not what we have here.
What we have here for the very sharp eyed is actually a sealed pattern. What's a sealed pattern?
Well this one's actually, this seal is rather nicely preserved so we have, it's a little worn
but you can see the three cannonballs and the three cannon of the seal of the Master General
of the Ordnance. It's in a shield, you'll see this in a number of different places, the Master
General of the Ordnance was in charge of an awful lot of stuff actually, not just Ordnance but
artillery, small arms, you name it and so this is literally, almost literally because it's not quite
Royal but a seal of approval, the Royal seal of approval, a government seal of approval, let's put
it that way, to say that this is in all respects to the pattern for this version of the Baker rifle
except it isn't, is it? Because it hasn't got sights, it hasn't got rifling, also the really
sharp-eyed amongst you might notice there's no notch cut in the bayonet bar here so you could
slip a bayonet on here potentially but it wouldn't stay on, so another indication that this is in
fact a sealed pattern for an unfinished Baker rifle and then a final thing here, it is missing
its front sling swivel, that's not deliberate, you can see the wear marks where it used to be, it's
been lost sadly but the muzzle here is excessively long but it has a groove cut so a guideline to
cut off this bit of the end of the barrel. So what does all this mean? Well nobody I don't think is
entirely sure, no one has set out in words in print what all of this means but my interpretation
of this which I hope other scholars and things would agree with is that it is in fact a sealed
pattern for an unfinished Baker. Why would you want that? Well most sealed patterns were the
finished version of the gun you want to make I don't know 10,000, 50,000 of, whether you're making
them in-house at your state arsenal or whether you're having them made by contractors, they would
be precise in every detail because they are instead of drawings, you take all your measurements from
the sealed pattern and you go away and you make your 10,000 or whatever contract. The difference
here would be all of these missing bits are things that a factory could do and I think what we're
seeing here is part of the story of the Royal Small Arms Factory at Enfield in its relatively
early days because the Baker rifle was the first complete firearm made at the Enfield factory.
First established as a site in 1816 there is manufacturing, putting together, setting up of
muskets and things going on at the Enfield site. This is North London, Middlesex as it then was
but they hadn't yet got to the point where they were producing their own complete weapons which
was the point really of a manufacturing. Previously the Baker, the 1800 version, the 1815 version,
they had been made, put together at the Tower of London from parts made around the country
in the ordnance system of manufacture. Relates to the phrase lock, stock and barrel in that
those three components are what you need to create your final gun. So they're making firearms at the
Tower of London but they are doing it from ready-made assemblies if that makes sense.
The idea of Enfield when it was fully up and running by 1823 which coincides with this final
version of the Baker rifle that we're looking at here is that they are making the thing from
scratch. Okay so you're probably still confused now thinking well if they're making it all from
scratch, they're making lock, stock and barrel and they're putting it together, they're finishing it,
doing everything you need to to send finished Baker rifles out the door, why would they ever
need an unfinished sealed pattern? Well where I start to speculate slightly is that you could
have in reserve a sealed pattern that any contractor could make. They don't need to be
specialist rifle makers, they don't need the high-tech barrel rifling machinery and they
don't need to be experts to go out and shoot the thing to get the sights set up and zero correctly.
They have that expertise by 1823 in-house at Enfield because we know they're making complete
Baker rifles with all of those features. So my speculation is that this is there might have been
another complete sealed pattern Baker, it probably was. This would be one that you could send out
at the time of war say to contractors, they make all of the time-consuming bits, basically the whole
gun, which technically is a gun, it has no rifling, and then you send those batches, those go through Enfield
who are probably busy doing other things at that time in this imaginary war situation, Britain
always wanting, well wary of war with France at this time of course, and then they cut the rifling,
they cut off and crown the muzzle, they cut the bayonet bar for the bayonet, they fit the sights,
they zero it. So they're only spending a minimum amount of time working on these things instead of
having to make lock, stock and barrel, set up the whole gun and then turn it into an accurate rifle.
So slightly long-winded bit of speculation there but it's really for me the only explanation
that makes sense, because this is no use to anyone in its current state.
Other details we might want to look at, well we do have markings here, standard proof marks,
crown, GR, broad arrow and the cross deceptors, standard ordnance proof marks,
we'll get you a look at that, and very faintly, because this has been polished and lovingly
cleaned to within an inch of its life over the years, E Baker is on the top here, so this
bears the name of the inventor and the maker of the original sample arms, so the first few,
the pre-production guns, and we do know that those cost 96 shillings to make, which is considerably
more than the production rifles, those cost 36 shillings if I remember rightly, which is
not as much more than a musket as you'd think. So 27 shillings was the cost of an India patterned
musket, the standard infantryman's musket of the day, so the Baker cost a bit more,
but perhaps not as much as you would think, but then these hand-crafted sample arms for
pre-production testing and stuff, we know those cost 96, quite a bit more. This isn't that, this is
something to control manufacture once manufacturing is ready to kick in, serial production if you
like, except there are no serial numbers on these. The lock-on here, now the 1823 pattern,
Baker, standardised on the 1796 pattern carbine lock. Now that, this is basically,
it's not quite a Sten gun version of the Baker, but it is a simplified for ease and cheapness
of manufacture version of the Baker, so instead of the series of different specialist locks that
they'd used previously, they standardised on the same thing they're putting on the 1796 pattern
carbines, and they probably had a load of in store actually, and in fact this one is standard
marked to the tower, it has tower on the tail of the lock plate, GR and the Royal Cipher on the
side, absolutely standard, you'd find that on, well, 1796 pattern carbine and probably some other
arms that I'm forgetting at the moment. The production, pattern 1823, Enfield made Baker,
well, we have the same equivalent proof marks on there, we have Enfield inspector's marks like
this very nice one on the tang here, which we can show you, which is a crown over a number,
and that number pertained to an individual inspector, and sadly I don't think we'll be
able to find out the name of that inspector in this case, it's a bit too far into the past,
but later on with Enfield made stuff, you can look up a list and say that was Bob Smith or whatever,
not a real inspector, I made him up as you might have gathered, and then critically for our story,
although this one has the same, basically the same Royal Cipher, although there are sort of
artistic differences in how they're marking things by this time at Enfield, that's basically the same,
the difference is on the tail of the lock plate and it says RLMY, sort of punctuated
in a certain way, Royal Manufactory is what that's short for, and then Enfield, famous name
Enfield. So we often talk about the first Enfield rifle being the pattern 1853, well arguably the
first Enfield rifle is actually the Baker, but it's this final last gasp version of the Baker
that was made I think until the last batch was set up in 1838 I believe, two years after the
Brunswick rifle had already been introduced, which is perhaps a rifle for another day.
So the final version of the Baker is the first product of the famous Royal Small Arms Factory
at Enfield, as it would later become known. Thanks for watching guys, we really appreciate it,
if you'd like to support us in other ways, well we have got our social media accounts, Facebook,
Instagram and Twitter, and over there you can play along with our What Is This Weapon every week,
those teasers if you like do tie into this video series, but you're just as welcome to watch the
series on its own as well, and of course any other content that we put up on the Royal Armouries
YouTube channel, and of course the usual like and subscribe, that would be great. If you'd like to
donate to us you can find out how to do that from a link in the description, you can even become a
member of the Royal Armouries as well, also in the description. But most of all, thanks for watching,
see you next time.
