Conserving a Eurovision Dress

Threads Through Time
2 followers
4 Video Views·Aug 7, 2025
Follow Senior Textile Conservator Susana Fajardo as she works on the dress worn by Sandie Shaw for her performance of ‘Puppet on a String’ at the Eurovision Song Contest in 1967.
Sound designer and performance-maker Julie Rose Bower has documented Susana’s steps using ambisonic sound, letting us get closer to the object than ever before.
Watch as the garment is meticulously inspected, and loose beads are secured onto the embellished underdress.
Conservation process:
Inspecting the dress: 01:20
Identifying loose beads: 02:02
Securing loose beads: 02:34
Using insect pins: 04:23
Securing of beads (no talking): 06:58 – 10:13
Photograph of Sandie Shaw wearing the dress at the Eurovision Song Contest, 1967: 10:31
This is the underdress which is completely embellished on bugle beads.
These are the bugle beads, the long beads, then we have sequins and then we have small beads.
So I'm going to lay my hands underneath and inspect it really closely and see if there are any
bugle beads or sequins or beads which are loose and they need restitching, securing before
the dress is handled any further and certainly before it goes on display.
This is the back of the dress so she would have sat on the side and move so
subject to more potentially more damage. I can see here we have a row of tiny glass beads
which has been pulled so you see fortunately the loop is not broken
so I don't think I have a loss of beads but it's been pulled so I'm going to try to
put them back into position, tuck the original thread and then anchor it down. So I'm going to use
two tweezers to help me pick up this pulled thread. I have to be very careful because I don't want it
to snap and obviously it's been pulled and put under a lot of tension and I'm going to attempt
to push my beads down but I see it's twisted. Let's see if I manage to ease them down gently
and then the excess of the pulled thread I'm going to then accommodate it on
in the center, in the middle and then anchor it down.
If I release the twist and then bring my dress beads down, okay now they're coming down nicely
okay okay a bit more if I can. I really need to be mindful of my thread, the thread is being pulled,
it's been stretched, it's being stressed so I don't want to be too demanding with the original
thread. I need to be careful not to break it. Okay so I think that's quite good. I am going to
be using some very fine pins, they're called insect pins and you find them in a butterfly
collection so you just need to hold the specimens against the board usually.
Okay here we are, I don't need all 100 of them so I'm just going to pick up a few
to use later. First put this under slight tension and then also
anchor my first stitching will be somewhere there okay so that is my position now so the curve is
more and more pronounced
I'm going to enter here and I'm going to travel underneath and the curve in the needle allows
anchor my thread and this is a tricky stage because my thread can get caught so once my needle is out
I'm going to pick up my thread and as I pull the needle I'm going to make sure
it's not getting caught anywhere
and you appreciate the craftsmanship of something so beautifully embellished
