The Hammerum Girl's Dress from the Iron Age, around the year 100 AD, is one of the best-preserved pieces of textile from Denmark's ancient times. Hammerum is located in Central Jutland, not far from the town of Herning. The garment has been recreated by Museum Midtjylland in collaboration with the textile workshop at Sagnlandet, Lejre.
Experience the skilled craftsmen from Lejre in action with sheep shearing, wool spinning, yarn dyeing with plants, loom setting, band weaving, and weaving of the garment itself.
The 2,000-year-old garment can be seen at Museum Midtjylland. The film was produced in 2015.
AI Generated·May contain errors
Video Summary
AI Generated
This video explains the meticulous process of creating a traditional Iron Age dress, specifically recreating the garment of the Hammerham girl. It details the entire production chain, from shearing local Jutlandic sheep and spinning soft wool into yarn to the complex technical process of using a warp-weighted loom and tablet weaving for the final trim.
When the sheep need to be sheared, the shepherd leads them in from the field.
He cuts the sheep with a pair of forged iron shearing scissors. This takes a long time.
Analyses have shown that the wool of which the Hammerham girl's dress was made
came from local Jutlandic sheep. This wool is very soft, comparable to modern-day merino wool.
From archaeological finds we know of primitive textile tools such as spindle and loom weights.
The loom weights are made of burnt clay. The wool is spun on a spindle that is a thin stick
fitted with a so-called whorl at the base and a hook at the top. The whorl's role is to keep
the spindle rotating while the wool is being spun. When spinning wool into yarn in the Iron Age,
the wool is teased by hand. In other words, the wool's hairs are lightly separated without
tearing them apart completely. When the teasing process is finished, the spinner takes a tiny
wad of the wool in one hand and with the other hand attaches the spindle's hook in the middle
of this wad. The spindle is set in rotation. The hairs of the wool and wad are slowly pulled from
each other and are gradually spun into a thread. The spinner alternates between keeping the spindle
in motion and pulling new fibres out of the wad. It is important that the fingers holding the wad
continuously spread the fibres so that they form a triangle before they are spun into the yarn.
In this way, it is easier to pull new fibres out of the wad. If another colour than white is desired,
the yarn can be dyed with different plants. Red and white yarns were used in the making of the
Hammerham Girl's dress. It is unknown what was used to make the remarkable red colour.
Before weaving, a warp must be made. These are the threads that run lengthwise in the fabric
under and over which other threads of yarn are woven. On a warp-weighted loom, the weaver first
has to make a starting border. This is a narrow ribbon woven with two sheds. The yarn which is
woven through the warp is called a weft. When weaving the starting border, the weft is pulled
through and the length of this will define the width of the finished cloth. The Hammerham Girl's
dress is woven in a twill weave. This is done by dividing the warp in four layers. This is done
already during the warping process. It is important that the weaver uses the right number
of warp threads per centimetre. During the warping, the threads are split into separate portions,
which go with every loom weight. Every portion is looped up separately so that they don't tangle.
In order to weave a piece of fabric that is a metre in width, four times twenty-five loom
weights are needed. Therefore, the warping process must be repeated twenty-five times.
The starting border has been sewn onto the bottom edge of the top beam, and the loom weights are
tied to the separate portions of warp threads so that they hang next to each other just above the
floor. Here the loom weights keep the warp threads taut. Around the warp threads, the weaver crochets
a spacing cord, partly to keep an even distance between the separate warp threads, but also to
maintain the width of the woven fabric. The spacing cord is pushed down until it is sitting just over
the loom weights. The weaver must be able to separate and lift forward the threads in the
different layers. Therefore, heddles, tiny loops, are knitted around a heddle rod and every single
thread. A helping stick behind the threads ensures that every heddle has the same length.
This stick is removed when the weaving begins. Hand-spun yarn is used to weave the fabric.
The weaving sheds are made by pulling the heddle rods forwards pairwise. In the resulting gap,
the weft is added in. It's important that the weft is put in loosely and evenly in order for the
weave to maintain its width. That's why the yarn is laid in small loops before the shed is changed.
Using a weaving sword, the weaver beats the weft up.
When the fabric almost reaches the heddle rods, there is no more space to continue. Therefore,
the fabric is wound around the top beam, also called the cloth beam, to make more space for
weaving. To keep the yarn taut, the loom weights are adjusted so that they hang just above the
floor. After finishing the weave, the fabric is sewn so that it forms a tube. Along the sides,
at the top and at the bottom of the dress, a woven trim is stitched on. The dress's trim can be woven
with tablets. Tablet weaving is a technique where tablets are turned to change the sheds.
The small weft is led back and forth between the dividers, thus creating a woven trim. The dress
is now finished and can be held together over each shoulder, whereby the top edge forms both
the neck opening and two arm openings. This style was very common in the Iron Age.
Around the weights, the dress is held in place by a belt, which probably would have been made
of leather. This is what the Hammerham girl's dress looked like. It has been recreated from
innumerable analyses of her grave and the fabric found in it, as well as the
comprehensible knowledge we have of Iron Age tools and craftsmanship.