How LUTs Can Elevate Your Cinematography

Filmmaking Techniques
4 followers
If you've ever shot something in log and accessed that raw footage straight from the card,
you'll know that it looks extremely flat and visually unappealing.
But don't panic.
This is because that log footage needs to be processed through a specific colour workflow
in order to elevate how it looks.
Part of this workflow involves using what is called a LUT.
If you've at all dived into the YouTube rabbit hole of LUTs,
you may have been left a little confused
with the added expectation that I will start trying to sell you my special LUT pack
straight after the intro.
Don't worry, I won't.
Instead I'll try to provide an overview to clearly explain the colour workflow process,
what LUTs are and how they can be used to improve the look of your footage.
This video is sponsored by Squarespace,
the all-in-one platform you can use to build a website for your business.
The reason that cinematographers choose to shoot in raw or with a flat colour profile
is that it offers the most colour flexibility in post-production with the widest dynamic range.
Shooting with a colour look already applied or baked into the footage that comes out of the
camera leaves minimal room for colour correction to be made or a different look applied to the
footage later.
While shooting in a flat colour profile means that you can later alter the look of the colour
and exposure to a much greater degree, manipulate the image and easily make any colour corrections
like changing the white balance or the exposure without the footage falling apart.
This is all well and good, but what does this have to do with LUTs and what are they?
LUT stands for Lookup Table and is a way of adjusting the colour and tones in an image.
The way I like to imagine a LUT in my brain is in terms of layers.
At the bottom layer we have the raw footage that is recorded by the camera.
When you download the footage from the card onto a hard drive, this is what you will get.
As we mentioned when working with cinema cameras,
this is usually recorded in a flat desaturated colour profile.
A LUT is an extra layer that can be applied on top of the bottom layer.
This LUT transforms each pixel's colour value to give the footage a new look.
Different LUTs can be created that output different looks, such as a more standard,
natural look, a warm, romantic look or a look that tries to emulate a film stock.
The reason that I like to think of the raw footage and the LUT as separate layers
is because when using a cinema camera the LUT is not baked into or combined with the raw footage.
Rather, the flat footage is recorded onto the card while the LUT exists as a separate
file that can be applied to the footage or deselected at will.
Because the raw footage is so flat, it's difficult to judge things like exposure
or colour temperature by using it as a reference on a monitor.
To get around this, cinema cameras can apply a LUT as a reference
on top of the raw footage that the camera will record,
so that the cinematographer can better imagine the final image.
If the same LUT is later applied on top of the flat recorded footage during the colour grade,
in software such as DaVinci Resolve,
then the image will look the same as how it was viewed on set with the same reference LUT.
Alternatively, different types of LUTs other than the reference LUT that was used for exposure on
set can also be chosen and applied on top of the raw footage in the grade.
If there's a colourist, they may choose to either use a LUT as a starting point for the grade and
then make additional colour corrections on top of that, or they may prefer to start from scratch
and build a new look during the grade.
Before I discuss the ways in which LUTs are typically used by filmmakers in the industry
on movies, series and TV commercials, I think it's important to address the common colour
workflows that are used across three different budget levels,
from solo shooter level, to mid-level, to industry level.
Starting at the solo shooter level, such as wedding videographers,
many people within this bracket have their own cameras and also edit and grade the footage that
they shoot. Having the ability to completely control how you want the colour in your image
to look at this stage is fantastic as you can deliver the grade exactly as you imagine it.
However, there's sometimes a bit of a misconception that a LUT is this magical colour thing that can
be downloaded online then thrown on top of your footage like a filter when you're editing to make
your footage cinematic. While this sometimes works, the issue with applying a LUT after
you've already shot all the footage comes down to intention and control.
What you want to also be doing is using that same LUT that you use in the colour grade
to also monitor how your colour and exposure looks as you're shooting.
That way you'll be able to correctly expose and light the footage in a way that suits the LUT,
rather than shooting footage, applying a LUT in the edit and then seeing that you've
underexposed, overexposed or lit with an undesirable white balance.
You want to shoot the footage to suit the LUT.
Once you start shooting more mid-level content such as for broadcast TV, you may find that
although you shoot the footage, that footage will now get handed over to an editor and sometimes
go through an online edit which will be done quickly and which you often have no input in.
The next time you see the footage after you've shot it is usually when it's broadcast.
In my experience this can sometimes go okay, but other times go disastrously wrong,
especially if the online editor just throws a random LUT over everything.
Therefore, what I've started doing to try and regain control back over the look of what I've
shot is to expose with a LUT that I've created in Resolve, get it as close as possible to the
final look that I want on set, then hand over that same LUT file to the editor to use as the
base look. They can then make small colour corrections if necessary, which saves them
time and at the same time preserves the look of what you want. Finally, at the high end industry
level, particularly on long form jobs, cinematographers often regain most of that
control of the colour back. This is because there's now money to spend on a proper colourist
who can help get the footage to the look that you and the director imagine.
Before we get into the different ways that industry level professionals use LUTs,
I need to say thanks to Squarespace, our regular sponsor who makes it possible for me to keep
making these videos. As you know by now Squarespace is the platform that you can
use to set up a great looking website all by yourself by using their easy to use templates.
You need a place where clients and collaborators can come to view a portfolio of your work
to get a feel for what you're able to do, with a contact page so that they can reach out and
employ you on the next job. You can set this up using Squarespace's galleries that allow you to
showcase your videos, designs or photographic work. To set up your website be sure to head
to squarespace.com for a free trial and when you're ready to launch go to squarespace.com
slash indepthcine to save 10% off your first purchase of a website or domain.
Before filmmakers transitioned to using digital cinema cameras, productions were shot, processed
and printed on film. It was the job of the cinematographer to choose which film stock
worked best for the job and how that film stock should be processed,
color timed and printed at the lab. This all determined the look of the footage.
After the digital intermediate and digital cameras were introduced as the norm,
some of this control of the color and look of the footage was taken away from cinematographers,
especially if they weren't allowed to participate in the color grade.
In recent years many cinematographers have tried to regain control of the look
by using a workflow with LUTs that treats them more like you would a film stock back in the day,
by exposing with a LUT on set rather than plonking a look onto the footage in post-production.
That way they can get as close to the final look of what they want while they are shooting.
They can do this by getting a colorist to create a custom LUT for the film before shooting begins.
The process for me in prep is how close can I get things ready so that when we are shooting we're
delivering the best product. You know we start talking about color, a lookup table, a LUT,
you know I believe that the future is creating the strongest negative you can on set.
Earlier we talked about the idea of a LUT being like an extra layer that's applied
on top to enhance color. Well there are also a few more nuances to the color workflow.
Before adding a look or LUT the flat files that come straight from the camera need to
use color processing to be converted to the correct color space. The most common color
space is Rec709. This adds saturation and contrast so that the color looks normal or realistic.
In grading software this is often called doing a color space transform by inputting the color
space of the camera files such as Arri Log C and then choosing the output color space that you want
such as Rec709. Now that we have the footage in the correct color space we can add a LUT layer
or look to the footage. On professional cinema cameras this can be done with either a 3D LUT
or what is called a CDL, a color decision list. A CDL is basically a way of tweaking the color
onset as you shoot by doing things like adding a tint or controlling how much color is in the
shadows mid-tones or highlights. This is usually done using live grading tools on a DIT cart.
For about two years now I've been working on onset color and trying to deliver my onset
dailies to be as close to final as possible. So I'm doing a large amount of onset adjustments.
I have a panel width so I can do my highlight and shadow control. I can do full
individual color channels for high, medium, low and I have tint adjustments. I'm basically
pushing the CDL as far as possible. The Bear Season 2, what you see on TV is my delivered
CDL. It's the first time I've proven that I can do final color onset with minor adjustments.
His DIT can then create proxies using the look he's created on set, which are used for editing,
and passed all the way down the post-production pipeline retaining his look.
Other methods I've seen cinematographers use without live grading tools on set
is to either expose with a specific LUT that their DIT will use to create the proxies,
or to get their DIT to grade their dailies on set with software like Resolve
before they create proxies with that look. Sometimes the DIT will carry an iPad which
they can export graded stills to that the DP can view, get feedback on and approve on set
before the proxies with that look are created. Whatever method is used I think it's good to
at least have some idea about the kind of colour look you want to create before you start shooting.
I personally really like this new trend of DPs trying their best to maintain as much control
over the look or the colour that they can by using a CDL or a LUT, both when exposing the
footage on set as well as when finishing it during the grade. I'd like to especially thank
all the Patrons for your continued support of the channel and also thanks to the amazing
YouTube community who watches these videos. Otherwise until next time, thanks for watching and goodbye.
