An Introduction to Throwing on the Wheel for Ceramics

Ceramic Art Studio
35 followers
Jul 23, 2025
Alrighty, well this video is specifically for my Ceramics 2 students at the high school.
We were just getting ready to start the wheel project before schools closed. Part of our
learning standards that we try to cover in level 2 is understanding basic concepts of the wheel.
So what I'm presenting to you today would be the demo that I would give to my Ceramics 2 classes,
introducing the wheel and introducing some of the basic forms and simple concepts.
Students, you will be using this video to complete the assignment that is on our classroom page.
You'll be answering some of the questions and I will have the video times tagged to the questions
so you can understand what I'm asking. So hopefully you will find this informative.
I am going to be covering some of the basic forms such as a cylinder, how to shape a cylinder into
a cup form, how to create a vase, a bowl, and a plate. So let's start off with the wheels.
Now I have another video that I'm going to have my students watch which is specifically on our
wheels that we have at the high school. My wheel is different. My wheel is a kick wheel, a motorized
kick wheel, so it does act a little bit different down by my feet. But the wheel head and the bats
and everything that I'm using will be looking the same. So the first thing that I recommend is that
you all use a bat mate. So the bat mates are back on the cart near the door called the Batmobile
and a bat mate is there to help keep your bat from shimmying about. I know many of you students
have probably signed up for level three next year so you're going to go into the wheel throwing
class without even having touched the wheel yet. So this this is all new for you I understand.
So the bat mate goes on underneath what is called the bat. Now the bat can be made of many different
things. They could be plaster or wood. These are plastic and they have little holes. Okay so they
have two holes and they fit down over the bat pins. I didn't even mention that but these are the bat
pins. They are little pins that are drilled through the wheel head and they're held underneath by
little wing nuts. Now the purpose of this again is so the bat doesn't shimmy or wiggle because
sometimes the holes have become enlarged over the years. Now you want to start off at the wheel by
having your clay already wedged. So I have balls of clay that are prepped here and they are wedged
and they are rounded. You don't want to come back and attempt to wedge your clay on the the bat. It
will get stuck and then it pulls the bat up. You want to do this back at your tables or on a wedging
board. You'll also want to make it into a ball before you come back in here. You don't want to
start off with a square piece of clay. You want a bucket of water and you will have a few tools
at your wheels that you can choose from to use. One of the only tools that you probably will need
on the day that you're throwing would be the wooden knife and possibly you might want a rib.
And again these would be in the tool bins. You will have a sponge in your water bucket,
okay, and you can have the water as warm water if you want. It's a little bit nicer.
You will also have one of the orange microfiber towels that I keep at the wheels. They sit back
on the stool of the wheels and that's for your hands to clean off your hands and such. Now let's
go ahead and I want to get started here. The first thing that you want to do is anchor the ball
approximately in the middle. So I'm going to take it and kind of thwack it down rather firmly and
you want it to be in the middle. If you have done it way off center, pull it back up, make it into a
ball, try it again. Now this next step I recommend for my students because as a beginner this is a
very helpful step. Before I've added any water to anything I've just taken my fingers and I've
smooshed it down to the back. What that does is it prevents water from going in under the edges
and that often lifts up clay. Like if kids get water underneath their their clay comes off. So
you want to be aware of that. The next thing is before I add water I take my hand and I'm just
smacking it into a mountain so it's approximately in the center.
Now you'll see that my leg is moving here it's because I'm kicking my wheel.
I'm trying to do as much without the motor as possible because my motor is very very loud on
this. Now that I have it sealed to the back and I have it into the approximate mountain shape, now I
should say I'm right-handed so my wheel is turning counterclockwise. If you are a left-handed person
you could reverse this whole thing and you would want to use a wheel that's reversed so it goes
clockwise. If that is the case the easiest wheel to reverse in my classroom are the five pacifica
wheels. The ones that are kind of like whitish or off-white a little bit. They have an easy
toggle switch that reverses the direction. Again please watch the video on the different
structure of the wheels that will be linked in this video and also in the assignment on our
website. Okay so I'm going to start off with my left hand doing the majority of the work.
So I'm not even touching the clay with my right hand yet. I want you to notice that my elbow is
tucked into my hip bone. Now at our wheels at school you'll probably find it easier to rest
your arms on your legs. It doesn't work as easily for me here with my the way that my kick wheel is
so I tuck my elbow into my my hip bone or my side. Okay the key thing is you want your elbow to be
The biggest mistake that kids make is they have like chicken wing arms and their their arms are
out here to the side. If your arm is out here like this there's no way that you can be stable and
your hand is not going to be stable either. So locked elbow and your goal is you want to
kind of think about directing your your pushing to the center point of the clay. So if I think
about this as like a wheel and my arm is a spoke of the wheel I want to push in with my hand
directing all my force from the the base of my palm in toward the middle. Okay I'm going to turn
this on now. Now when you are pushing in okay you want to kind of hug the outside of the clay so my
outside finger my pinky and the outside of my hand that's down against the back. Now I can also take
my right hand and push against the bat on the outside and notice that I have the sponge in
the outside hand. You want to always add water. I have not addressed that. Water is key. Water is
what keeps the clay slippery in your hands. If you don't have enough water you will have friction
the clay will stick and grip to your hands and it will throw it off center every time.
Okay just speeding that up again and then I'm pushing it back down. Notice I'm using my left
thumb and the next step that I'm going to be doing I'm going to be coning which will help center.
I want to address my pressure down where my hands can touch the bat
at the base of the wall. So I push in really hard again my elbows locked
to my side. I'm going to take my right hand across from it
and as I squeeze my hands together it comes up into a cone. Now I'm going to push that down
water my left hand uh my thumb wraps across the top and that makes it go down. For beginners I
recommend that you cone it two to three times and remember that you must have a lot of pressure right
down here where it meets the bat. If that part isn't centered you can't get the clay centered.
One of the mistakes that my kids make quite often is they center this top part but they're not
they're neglecting the base. The base is more important because once you get the base centered
then you can get everything else centered. Now at this point my right hand has only been
doing kind of a pressure on the right. Right so I'm going to cone it one more time
and then I'm going to push it back down again.
Okay now on the on the right hand side when I was doing that I should mention
that my right elbow is dropped to my leg.
Now the last little bit of centering is to make this into a hockey puck. Currently it has a dome.
I don't want it to be domed I want to make it into a hockey puck.
So to make it into a hockey puck I'm going to make a right angle so my left hand is the side
it's pushing in my right hand is going to be on top. So like a fist like I would punch except
I'm going to lock it to my left. So notice how they're touching they're going to be locked
there's not a gap between them. So with both of my elbows down okay I'm going to push in with the
left and down with the right and if you have already coned it you should have a nicely centered
piece of clay. Now one of the big mistakes that students make sometime is they have abrupt hand
motion. So you can see I have this nicely centered now. You always want to have slow
and deliberate hand motions when you remove your hands it should be slow. So let's do that again
I'm pushing in with the left down with the right but I took my hands off quickly. Notice I did not
push when I took my hands off I just took them off fast and that's what will happen. So the most
common mistake is not using slow even hand motions. You can throw it off hands locked elbows locked
and then you should be good to go. Okay next this is the centered hockey puck. So I put the clay on
coned it about three times and then you bring it into center. You should not see a wobble at the
base nor should you see a wobble on the side nor wobble on the top. If you see a wobble in any one of
those areas you're not centered. So remember elbows locked okay hands locked pushing in with the left
down with the right. The next step is to drop the middle. When dropping the middle there lots of
people use different methods okay some people use two thumbs when I first learned I I would
use like my middle finger on my right hand but there's a nice little trick that beginners
find handy if you take your left hand which is the side hand you take your left thumb and you
kind of gently guide it in you can you're creating a little jig out of your your hand.
You've created like this little mechanism this tool that enables you to push it in. Now be aware
that you have to have enough water on there so you don't get friction. So I have now created
an indent that is shaped like a V. So if I show you this there we go it's shaped like a V.
Okay now I'm going to open it so the interior width of the base is determined by whatever
object I plan to create. So in this case I'm going to make just a cylinder that I'm going to shape
into a mug. So I want the interior opening to be the same opening width as the base of the mug
and I just compressed it there with my sponge. Now once you open it
and I should have mentioned the thickness let me just hold this up.
Okay so there we go that is now opened. When you open it you will probably as a beginner need to
check the thickness of the base. There is an easy trick and I could have done this while it was still
in the the V before I opened it up all the way when I just dropped the middle.
If I stick a needle tool in there and then I slide my finger down against the shaft of the
needle tool until my fingertip touches the clay and then I pull it straight out you can see from
the tip of my finger to the tip of the needle tool if you can see that that's about half an inch and
half an inch is appropriate three-eighths to an inch of an inch to half an inch is typical for
most trimmed feet. Okay so continuing on. All right so I've opened this up it's about three-eighths
of an inch or half an inch thick. I've opened it up to the diameter of the base that the base
of the interior should be. Now before I pull up there is a little trick that I want to show you
and that is called re-centering the wall. There is a poster in my classroom on the wall and I'll
link it in the video description for anyone that would like that. I have another video on how to
re-center when you've opened it up and you need to re-center it so I'll link that as well.
So to re-center a wall we need to create a channel through which the clay will pass.
So if you can see I'm going to create a channel with my left fingers on the inside left thumb
on the outside and then my right hand with a sponge on the top. So as I grip this
I'm squeezing side to side with the left pushing down with the right. Now I was already centered
but let me just give you a for instance let's say I've opened it up and I've thrown it completely
off. If I do this left is squeezing side to side between the thumb and the forefinger and then the
right is on the top with the sponge that can re-center it. Okay once it's re-centered now
I'm ready to start the pulling process. The pulling process is the first time your hand
position is going to be slightly different. Up until this point the left hand has always been
on the exterior but now my hands switch. So my hands are going to be on the interior and the
exterior of the piece. So the left is on the inside right is on the outside. If you imagine
this is like the face of a clock my hand position will be over here around say four o'clock maybe
three four or five o'clock it depends on what feels best to you. But the clay will be spinning
away from me between my fingers in a way never I would never put my fingers on this side and
have it spin towards me you could get your fingertips caught in there really easily. Okay
so my hands will be locked my elbows will be locked again you might lock your elbows to your legs
and you can use a sponge in the outside hand if you would like but my hands are touching my elbows
are locked I start by squeezing the clay at the base of the wall as I gently pull up on the wall
when I get to the top of that pull I gently compress it. Now the squeezing of the clay is
compressing it and that will make the clay go taller. So once again I go down to the base of
the wall so my right fingers are on the exterior down against the base I'm pushing against my left
fingers on the inside as my hands come up the wall there we go that's a second pull. If you are
trying to do pulls and you don't have any progress at all that probably means you're not
quite squeezing enough. Now let's talk about the hand position as I said it was locked like this
the hand position is that your fingertips would touch each other if the clay weren't there.
I happen to be using the sponge in the outside but you don't have to make sure that you have
plenty of water though so my hand position would be touching if the clay weren't there
and I continue to pull up you never stay in one spot for very long you have to keep it moving
upward. Okay and that is a pull. Now I do want to show you one little trick that I've seen before
okay I'm going to make a little line on this okay that line let's see if you can see this
okay can you see the line the line is there to show how quickly I'm pulling so let's go ahead
and get this going again I'm going to make another pull now if I am pulling too quickly
which this next pull is going to be way too fast okay if I pull really quickly
I often get a spiral and the line is still visible okay so if you are pulling too fast
that can be a problem okay so let's instead I'm going to correct that
and I'm going to use my sponge again in the outside hand I'm just going to pull straight up
nice slow and steady pull and the line is completely gone because I allowed my hands
to kind of like I was compressing over the same area I was going slowly enough as I pulled up
so that's a good little trick that's a shout out thanks Sean Felt who I picked up that little
trick from that's a great little trick for beginners to understand how fast or how slowly
they should be pulling now you can see that my cup is starting to angle outward ever so slightly
if you're trying to get something that's super straight okay you can always do a slight and you
don't want to rely on this too much but you could do a slight collaring so if you wet it down and
pull up from the bottom you can see how you can straighten it up again and the trick in allowing
it to stay totally straight I usually tell my kids is I you might occasionally allow the outside hand
to precede the inside hand so it's kind of directing it inward there are different tricks
that different potters do but that's a little trick that I do you can obviously leave a spiral
that is you know on purpose oh I just kind of expanded that out a little bit with
sticking my sponge in there on accident all right now let's talk about how
a cylinder a straight cylinder can be altered almost everything is thrown from a cylinder with
exception of plates I show a totally different way for a plate so once you have it thinned
then shaping is done after thinning now even with a bowl I make it in a cylinder but it's usually
wider to begin with okay so let's say I wanted to flare this out and give it a belly but maybe I
want to keep the top the same diameter again I'm going to add moisture I'm going to start a pool
down here at the bottom but I'm going to let my interior fingers kind of precede the exterior
fingers and then I'll reverse it now the exterior precedes the interior so that little little bit
of a difference where you push a little bit harder maybe with the inside a little bit harder with the
outside that can change your direction makes a big difference now you can use things like ribs
if you would like to use a rib and in lieu of your fingers beginners usually find this a little
bit trickier because you don't have you know a natural sensitivity as a beginner but I will just
show you that ribs can be used to sometimes refine the form maybe I want to put a bit of an angle
on it there and you can you can do stuff like that with with the use of a rib
okay before I call this one done I'm going to soak up the puddle
because if you have any water that's left in the bottom of a form
it will weaken it it will weaken the clay and potentially crack it
all right so we've gone over the basics now that I've shown you how you can take a cylinder
and then shape it a little bit let's go with a slightly easier form we're going to go with a cup
now for my students when you guys are beginners I always allow you to keep your pieces on the
bat you just write your initials in the bat on the slip but for the purpose of me being in my
small home studio I'm going to remove this so I just got the slip off my hands and I'm setting
it over on a board I have here okay next we're going to do the same process we're going to go
faster though and this is going to be a bowl again no water until I have it sealed and pounded into
so just like before I start off with my left hand on the side and water I focus the attention at the
base of the wall where the clay is meeting the bat and then I'm coning it now notice whenever
you cone keep that left elbow locked your hand is making sure that the wall is stable down there at
the bat and the the clay is always domed when you cone it you never want an indentation in it
when it's coning okay now that I've coned it three times again as beginners I recommend that
now I'm going to make it into the hockey puck form
both my elbows are locked my hands are locked together
so I'm going for a flat top flat side okay when you have a centered hockey puck
no wobble top or side then you're ready to move on to dropping the middle when I drop the middle
I'm going to use my thumb of my left hand and push it in I could then stop the wheel
check it for the thickness make sure it's about half an inch thick
I don't need to do that online because I know it is
now I'm going to pull this open I'm going to speed up my wheel again
the big thing about a bowl that's different than a cylinder is as I pull it open I want to be aware
that I want to have a bowl that is scooped and rounded on the bottom so as my fingers come
towards me I'm pulling upward so the bottom of the bowl is going to be scooped okay it's not
going to be flat with a corner it's going to be scooped I'm going to take my sponge and compress
in here and let me show you
all right so the difference is there's not a corner it's rounded and scooped
okay now when I begin to pull up on this wall because it doesn't have a corner in there my
fingers don't go in as far in the in the middle part because it's scooped and rounded
I did widen it up just a smidge in there I wanted to have the bowl just a little bit wider
and now I'm just going to pull it straight up
although I am kind of going underneath that the angle right down here I kind of pushed
in quite a bit because I I have a lot of clay at the base of the wall so I wanted to pull that up
there we go now oh I did not mention this but this piece of clay was two and a half pounds
so two and a half pounds can give you a very sizable bowl like this would be a nice sized
salad bowl it's probably a little bit big for an ice cream bowl unless you want a ton of ice cream
I'm going to do one more pull
just to thin it out a little bit more
and shaping it so what I just did then was I just pushed it a little bit from the interior
I should have mentioned that before I did it so on that final pull I kind of pushed it
to like curve it out just a little bit more I'll do that one more time I'm pushing a little bit
more with the inside hand to give it a little bit more of a belly a little bit more of a curve
with it spinning I'm going to get the water out of the bottom and I've not really addressed that
but never touch the clay on the wheel unless it's spinning because you'll throw it off like if I
had the wheel stopped and I start wiping it on the inside you're going to throw it off
okay then I'm going to trim away some of the extra here
all right and this one is a little wide so I think I will actually leave this one on the bat
but I definitely need to cut it so every time you throw something even if you leave it on the bat
you want to cut it and you can stop the wheel it doesn't have to spin while doing that but you want
to make sure that the wire is pressed firmly against the bat as you do that all right so
that one is done so I've done a cylinder and then I shaped the cylinder into a cup I've done a bowl
next I'm going to do a plate the plate is a little bit bigger with my students I always tell
them a dinner plate should be think like a very small cantaloupe so maybe three and a half pounds
four pounds four pounds is what I use for a standard dinner plate with a trimmed foot
so I smooshed it into the mountain and for this one again I'm going to concentrate my efforts at
the base of the wall as I cone it and push it down and then efforts at the base of the wall cone it
push it down remember that you always have to be centered at the base of the wall
before you can move on now I'm making this into the hockey puck okay here's where it all is
different with a plate a plate gets flattened out into the flat disc and then the wall is raised
so I'm going to flatten it out until it's only probably about an inch or three quarters of an
inch in height that's the the entire height of the disc so you want to flatten it out so you
still have you know about three quarters of an inch of thickness at the base if you're trimming
a foot it's going to be really important that you have three quarters of an inch
and then I'm just kind of squeezing and compressing the outer edge
now this this particular piece is centered I'm fine to make a plate directly from this but I
want to show you a really awesome trick so this part is where sometimes kids get this far but
they've thrown it off when it comes out and the edge is is a little wonky so this is the
cool trick where you can take a wooden knife and as long as your top part is completely flat so
let me just do this as as a example so if I'm using like this big old platter rib
and I make sure that my top is flat okay so my my top is nice and flat if I have an off-centeredness
in my edge I can then cut it off with a wooden knife so let me show you how take two hands
hold it firmly
drop it slowly cutting off the outer edge so as long as the top was even before you did this
if you cut off the outer edge you've now cut off your off-centeredness now this is not a necessary
step it was not necessary for my piece right now but I just wanted to show you how it's a great
little trick for a beginner to have a nice even plate now let's talk about how to make this look
like a plate to raise the rim I'm going to add a little water I'm going to take my dominant thumb
so my right thumb I hold my hand with my left hand as well I press down against the bat so my nail
was actually like down against the bat as I was pressing and this raised a little bit of clay here
so I'm going to add some water to this
and I'm doing the whole re-centering of the wall this is I and I did not mention this before but
when I re-center the wall I call this the duck bill okay so if you squeeze side to side with
the left and compress down with the right now you have re-centered that wall and you have a wall that
you can bend so this is a smallish plate again this was only about three and a half pounds
so I can just gently squeeze and do a pull when I get to the top of the pool and I just
compress that edge okay now you can modify the angle of this
with a tool with your finger with a rib I'm going to angle this outward a little bit more
okay so it was a wall and now I just angled it now one of the key things with a plate is always
leave adequate support at the base of the wall don't thin it out too much it it the wall should
go down and get a little bit thicker right at the bottom because you have to have that support
when you're making a plate because if you have that angle of the like a flange that sticks out
you don't want it to collapse
so here I'm just taking a red rib and kind of compressing this transition a little bit
there we go you could certainly do something like a spiral if you want to you could do this on any
sort of form I'm just going to take my sponge add a little bit of water press right in the middle
and then I have like a little spiral that I just put in there spirals catch glaze a little bit okay
if you wanted to do something like a flat sort of a flange you can take a tool
right here I'm just going to do a little bit of a angle change right on the rim
so it's just a little little delicate flat edge there okay now for a plate for my students keep
your plates on the back don't don't attempt to take it off I'll just trim away a little
bit of the excess right there I'll cut that one and I have one more form to show you
and I know this seems like I'm showing you guys a lot but this is exactly what I would show you
in class if if we actually had a class bell I would be showing you all of these
I can't believe I just did that
I just had to stick that back on to fix it because
as I was picking it up I was careless and I bumped it with my hand
okay so this time when I pick it up
I want to get something underneath there close to one of the bat pins like the edge of a rib
there we go and last one is going to be a vase because vases are always requested students
always want to like make a base for their mom or something and I am again going to use the same
process coning focusing on the base of the wall as I cone it and then eventually bring it down
into the hockey puck once it's centered now when I just made that first pull I didn't even really
mention this before but I did a squeeze with between my left thumb and forefinger as I was
compressing the top of the wall now I want to try to keep the top of this narrow because if this is
a vase I want to keep the top narrow and I'm going to show you a couple of fun little tricks
now sometimes when you put your hand in there it's going to make it a little wider just because
your hand will widen it up but I can re-narrow it okay so right down here at the base
I'm now going to shape the bottom of this by pushing out a little bit
I'm going to create like a little bit of a belly
this is a very small little vase this was only about a pound and a half about the same
that I did for the cup and then I'm going to get the puddle out of the bottom
okay and now I'm ready to start to make it a little bit more narrow so when I make this more
narrow I'm going to make sure I have water on there and I'm going to do what's called collaring
so just I start from lower and I pull it in so one bit of collaring now needs compression
after that whenever you collar something you want to follow it up with a pull
of compression because collaring is going to throw it off a little bit
collaring will have a tendency to
perhaps warp it a little bit so you don't want to collar too much at once
you do one one bit of collaring then a pull
then I'm going to do another bit of collaring
so I'm definitely going for a vase that has a belly and a skinnier neck
do one more collar
I'm going to take a little bit off the top just to make sure that's all evened up
and then I just want to thin this edge so I'm squeezing between my left
fingers and I was kind of compressing it on top of the right
I'm going to take away a little bit of the thickness down here at the base
I'm going to get a little bit of my slip off of there I'm using the metal baby rib
very gentle because of course my my hand's not on the inside
so
okay now here is my vase form but I have a fun little surprise that I want to show you
and this is how you can blow the vase form and get it just a little bit with a little bit more
volume so this is my last form that I'm doing and I'm going to blow directly into this and
if it works right and my walls are thin enough it should kind of blow up a little bit like a balloon
I have my towel handy because I'm going to wipe my mouth off you ready here we go one two
and that one little trick of blowing into it adds a little bit more volume
kind of the trick is also stopping before you
blow a hole in it which I've done before and in fact I have a video where I blew a hole in it
so that one being kind of thin I might just leave this on its bat too I will come back and show you
what we would do when they're leather hard that will be next week's um viewing that you guys will
watch so hopefully this was a helpful little tutorial for you to understand a little bit
about what we're doing on the wheel I am so sad that all of my students from this spring semester
in ceramics too won't have the chance to get on the wheel because of the coronavirus so I hope
that many of you decide to take level three wheel throwing in the future so you can give it a shot
take care hope y'all stay safe stay healthy and keep potting if you can
