Hi guys, welcome back to my channel. I'm so glad you stopped by today because today we
are going to be doing a dragon sculpture. Recently I've been in the mood to kind of
move things around and I wanted something kind of cool to put on my desk so I figured
making a very decorative dragon bust would look really nice. So that's what we're going
to do today. Oh, I forgot to move the pieces for our next project. Oh well, there's a sneak
peek in the background if you guys can see what it is. Anyways, let's get started. Okay
guys, so the first thing that I'm going to start off with is a wooden base for our sculpture to
set on. So I have that and I also have a wire sticking out of it that we're going to start
wrapping tinfoil on. So I'm just going to take really long strips of tinfoil, bunch them up and
then wrap them around that wire and start shaping the basic shape that I want for the dragon. So
you'll probably need a decent amount of tinfoil for this, but the more tinfoil you use, the less
clay you're going to have to use. So it'll help keep it lighter as well. So I'm going to shape
out kind of a nice base where the kind of shoulder area of the dragon can be. I'm going to make a
neck and then kind of build it up a little bit more on the top portion where the head is going
to go. Now for this dragon, I want the head to be a little bit more angular, so I will kind of
taper off as I get to the top. And then once I have a basic shape laid out with the tinfoil, I'm going
to start covering this in clay. So I'm going to take some really large thick strips of clay and
start wrapping it around my tinfoil. So I'm just going to keep wrapping, layering them until
everything is completely covered. Once I have my tinfoil completely covered in clay, I did realize
this kind of looks like an earthworm head, so if you're going for making a giant bust of an
earthworm, you can stop at this point. But if you want to continue and make a dragon, we're going to
start blending all of our strips of clay together. So we want to have a nice smooth base to work
with. Now at this point, I decided that I wanted to have the mouth of our dragon just slightly open,
so I'm going to make a pocket for that. So I'm just going to start opening up the clay and make
a tiny little spot where the mouth would start separating. After that, I'm just going to go down
the head a little bit and figure out where I want all the features. Do I like the basic shape of the
head? Mark everything out and just make sure that I like everything before we start adding more
details to it. I decided that I wanted the neck of the dragon to be just a little bit skinnier,
and I want the head to just be a bit more separated from it. That way the head and the neck have a
defined difference between the two. So I'm going to remove a little bit of clay there, and then
also I have some horns that I made out of resin that I want to add to the dragon. So I'm going
to make some kind of sunken in spots that we can use to put those horns in place. So I'm going to
remove all that clay, figure out where everything is going to go, and I'm going to take the horns
that I want to add, and I'm going to push them into the spots and mark where those are going to go.
Now if you want you can leave your horns in place and continue sculpting around them,
but mine have kind of this glitter inside of them because of the way that I decided to make
them, and I've found that the glitter tends to lose its shine if it goes through the oven. It
just slightly melts and doesn't look as shiny, so I'm just going to pop those horns off and make
sure to leave the openings available to attach them later. So now what I'm going to do is I'm
going to start adding some scaling effect. I'm going to start with the very top of the head and
the back of the neck. So I want to add some spikes and some layered scales to this. Now I'm also
going to be adding some other resin spikes to the neck, so I don't think I recorded all of this,
but you'll see every now and again there are some extra holes on the side of the neck, and that's
because we're going to add more resin pieces to it. So like right behind the spot where our main
horns are going to go, I have some little holes right there, and those aren't ear holes, those
are for some spikes. Now I'm going to move on to making the eyes. So I'm going to take some little
balls of clay. These are even amounts, so you want to make sure that they're as close to the same size
as possible, and I'm going to lay them out in the spot that I've decided that I want the eyes to go.
So I'm going to lay out the eyeballs, and then I'm going to take some strips of clay, and I'm going
to start on the bottom eyelid, and then after I'm done with that, I'll work on the top eyelid. And
I'm just laying out the strip, figuring out where I want it, and blending it into the face. I'll also
use my tools to kind of redefine the shape of them around the eye to make sure that I get the
expression that I mainly want, because you'd be very surprised on how much of the expression is
based off of the shape of the eyelids, especially with something like a dragon that has limited
facial muscles to make more of a mouth expression. Honestly this whole sculpture, I really didn't have
much of a game plan. I just decided that I wanted to sculpt something, and I went with it as I was
doing things. So none of this was planned. I didn't sketch anything out to decide, oh I want it to look
just like this. I just started making it just for fun. Now I'm going to move on to fixing up the
shape of the mouth a little bit more. So I'm going to make a really long strip of clay, and I'm going
to lay it out for the upper lip of the mouth. I'm going to make sure that I like where that's at. I'm
going to press it in, and I'm going to blend it upwards into the face. Now I'm going to do a very
similar thing to the top of the head, because I decided that I wanted to square it off a little
bit. I didn't want it so rounded. So I'm going to take another long strip of clay, and I'm going to
lay that out where I want the edge to be, and then I'm going to blend it in on both sides. So I'm
going to blend it into the top of the head, and going down the side of the face. After that I
moved on to adding some teeth. I did not realize the camera went out of focus at this point, so you
won't really see much of the teeth, but it was just kind of strips of clay, and little balls of clay
placed, and then blended in, and yeah. Sorry about that. Didn't realize that until later. But after I
had the teeth placed, I did basically the same thing that I did to the upper lip of the mouth,
to the bottom, except we're only going to be doing the very front portion. So I'm just using kind of
a shorter piece of clay, laying it out, and then blending it downwards into the bottom jaw. Now at
this point our main features are pretty much in place, and I'm happy with them. So now is just
adding a bunch of texture, and different things like that, and cleaning up some edges, and making
everything look a little bit more crisp. So for the top of the head, I want to define those sunken
in spots a little bit, so I'm going to use a tool and kind of clean up the edges on them, make them a
little bit more defined. And then for the sides of the face, I want to add more of a scaling texture
to everything, so I'm going to start breaking up the face into different sizes of scales. So the
lips, these are going to be broken up into slightly larger scales, and then more of the smaller scales,
these are just going to be done with a dotting tool. When I got down to the sides of the neck,
I realized I didn't want to add too much detail here, because I figured it'd pull away from the
face a little bit, so I'm just going to add a little bit of a scaling texture lightly on the
sides. And to do this, I'm using the backing of a seashell that I like the texture of, and I'm just
kind of pushing it in, and then just roughly going over the entire surface. And then once I got to
more of the front of the neck where the shoulders would be, I decided I wanted to remove a lot of
clay. I wanted to define those veins and muscles that would be there and have more sunken in spots.
So I'm going to just kind of chop away and reshape the front of this a little bit. And then for the
scaling, I'm going to have these a little bit deeper and more defined, and I'm going to have
them kind of angling more upwards to pull your eyes towards the face. Because again, I want to
add detail here, but I don't want to distract from the main part of the dragon. And then lastly, our
dragon kind of has a little bit of a weak jawline, so I decided to add some spikes to the very base
of it. So I just added some clay right there, and then I started shaping it and defining it. So I
kind of separated it from the rest of the skin, and then added more of a line texture to it. Okay,
I actually lied. I did do one more thing. I cleaned up the very base of the sculpture by adding some
strips of clay around it and just trying to make it look a little bit more finished. So I wrapped
some strips of clay around the base. I did two of those, and then I just kind of pushed in with some
tools to make it look a little bit more decorative. And then after I was done with that, I double
checked to make sure everything was the way I liked it. I didn't bump anything or smear anything. It
was all good, and I put my dragon in the oven for about 55 minutes at 275 Fahrenheit. Now for the
painting, I want to start off with all my shadows first. So what I'm going to do is I'm going to
start off with some black paint. I'm using only acrylic paint for this, by the way. And I'm going
to go over a small section and make sure to paint into all the different cracks and crevices. I'm
going to go over that with my black paint, and then I'm going to wipe away any excess clay that's more
on the raised up portion of the clay. Now this will stain the clay a little bit of a more gray
color, but I'm perfectly fine with that. I just mainly want to get the black into all the cracks
and crevices. So I'm going to slowly do this to the entire face, just part by part. That way the
paint doesn't dry before I can wipe it away. And then once I've done that to the entire sculpture,
I'll let it dry for a little bit and then start on the details. Now it is actually going to be kind
of hard to paint inside of the mouth while everything else is painted, so I'm going to
start on that first. So I'm just going to make sure that I got all the black paint inside of
the mouth so it's nice and dark in there, and I'm going to go over the teeth with a white. Now
painting white on top of a dark color is a little tricky, so you will have to do a few different
layers of this until they look nice and clean. And then after that, I decided to take more black,
and we're going to darken up the portion right where the head meets the neck. I want to have
a shadow there. So I'm going to add that dark shadow, and then I'm also going to blend out
the edges of it so that it's kind of faded into the rest of the face. And then I'm going to slowly
start adding the colors. I think I'm going to start with the under portion of the face, the
bottom of the jaw, and the chest area, and I'm going to do darker colors here. So I'm going to
go with more of a really dark blue, and then as we get to the sides of the face and more of the
top of the head, we'll end up lightening everything up. So every color that I'm adding, I'm blending
into the other colors, that way there's not an immediate like drastic cut from one color to the
other. Now I normally don't do this when I'm working with purples and blues, but I decided
to add a little bit of red to it, just to kind of make some areas pop. So I added that kind of
around these shoulder blades and the top of the head, and then I blended it into the rest of the
color. And then once I got to the top of the head and neck, I decided I wanted to go very bright. So
I faded that purple into a very bright lavender, and then the top of the head, I'm actually not
going to blend this in at all. I'm going to go straight like cyan blue. So the edges of this I
left nice and crisp. I made sure to kind of frame it in first, and then I filled in my color. So
those are just our basic colors being laid out. I'm going to let that dry a little bit, and then
we can start adding our details. So I'm going to start where the eyes are. I'm going to add black
to them, and I'm going to start adding highlights and making the eyelids themselves kind of pop a
little bit. So on the face where I want to draw more attention, I'm going to use a more lavender
color on top, and I'm just going to brush lightly over. I'm not trying to get any of the color into
the sunken in spots that are darker. I want more of the raised up portions to be more bright and
vibrant. So I'm just lightly going over that and adding color to it. So I'm mainly just adding
highlights here and there, adjusting things randomly. The top of the head I decided I wanted
it to be a bit more metallic, so I went over that cyan blue with a more metallic blue. This one I
just lightly went over because I didn't want to change the color too much, but I did want to make
it look a little bit more shiny. Now here's where I make a very drastic change, and the back of the
neck is no longer going to be lavender. It's going to be turquoise. So I'm working a lot with my
metallic paints right now, and I just pulled this one out, and I was like, I want to add it. So I did
the whole back of the neck turquoise, so lavender out. But after finally figuring out what colors I
wanted and everything like that, I got everything done. I let it dry, and then I decided that I
wanted to add some gold to it. So I have this one gold paint that's really pretty, and I want to add
just a little bit more decoration to the piece. So I'm just going to go over random parts of the
sculpture to add a hint of gold to it. So like the spikes going down the back of the neck, I'm going to do
those. I'm going to add some line work going down the sides of the neck. Just start adding gold here
and there for no reason other than I think it'll look good. I went over some of the scales on the
face. I went over the spikes that are sticking out of its jaw, and then I also did the base of the
sculpture. So I just went around that little decorative thing that I trimmed the edge with,
and I did the entire thing gold. Now we are done painting, but we are not done with our sculpture.
So I'm going to make sure everything completely dries, especially the gold paint. It's not
acrylic based. I think it's alcohol based. So I'm going to make sure that's completely dry first,
and then I'm going to mix up some resin, and we're going to go over the entire sculpture with it. So
I'll need a decent amount. I mixed up a pretty good sized cup of it, and then I'm just going to paint
over absolutely everything. The reason I'm going to paint over it instead of just pouring it on is
you won't need to use as much, and it helps you get into all the different cracks and crevices,
and to have kind of a thinner coat because we don't want a thick coat of resin over it. It's just a
thin coat to help protect everything that we did. Kind of think of it as a thicker varnish, and then
after that's done curing, we can add our horns. So I want our sculpture to be resting on its side
so it's easier to connect everything, and we're going to be using resin to connect these as well,
and it tends to drip. So I made a little makeshift thing out of cardboard and rubber bands so that it
could stand up because if you notice the base is square, but it has the point right in the middle
so it wouldn't stay on the side that I wanted it to be. So I did that. I made sure it was nice and
secure. It wouldn't fall over or anything, and then we're going to start adding our horns and our
spikes. For the spikes, they just have some holes that they're going to be pushed into, so I'm just
going to add a little bit of resin into those holes and then push my spike in place. Now when
it comes to the larger horns, these are set more at a slant, and I don't have a really big sunken-in
spot to stick them in, so what I'm going to do is I'm going to use a little bit of hot glue. I'm
going to lay out my resin first, and then I'm going to put a dab of hot glue in a spot, and that'll
hold it into place long enough for the resin to cure. So I'm going to get my resin and my hot glue
in place, and then I'm going to quickly put my horn into the position that I want it. I'm going to do
that to both of them, and then I'm actually going to take the excess resin we have and paint over
these horns. That way they're nice and shiny and glossy as well. This will actually help all the
different glitters that I have inside of the resin horns really stand out. So I'm going to go over
that, and then I'm going to make sure everything's positioned where I want it, and I'm going to set
it somewhere safe to cure again. Now anytime you are using resin, you do want to double check on
it every now and again to make sure it's not dripping in a weird spot, because I did have
some drips going on when it came to the horns and where they were placed. So you'll want to kind of
check on it maybe an hour or two after to see if it's dripping and to wipe that away. Okay guys,
and that's how I made this dragon bust. I had so much fun making this, especially because I really
didn't put much of a plan into it. I just decided to make it and figure it out as I went, and I
haven't been able to do that in quite a while, so it was really enjoyable. Now this piece isn't for
sale. This one is going to be decoration for whenever I decide to move my desk, but in the
future I might make smaller versions for my shop if you guys think that's a good idea, because I
do kind of like the idea of every now and again doing sculptures. Anyways guys, thank you so much
for watching. Make sure to like, subscribe, do all that fun stuff, and I'll see you guys next time. Bye!