Concorde CO2 Basics: Safety Tips

The Technology of Old Crossbows
4 followers
6 Video Views·Jul 22, 2025
Concorde CO2 Basics: Safety Tips
In this section, we're going to review CO2 safety tips to make sure that you are safe and properly
using CO2 and the CO2 bottles that are required for use with the Concorde Crossbow. The first
point is that you're going to want to use a refillable 9-ounce CO2 bottle filled only with
CO2, similar to the bottle that I have here. You're not going to want to use a disposable bottle,
nor are you going to want to use a different sized bottle, nor are you going to want to
fill the bottle with a different propellant, such as compressed air or nitrogen. The CO2
system, the Concorde Quickdraw system, has been specifically designed to use CO2,
and it's been specifically designed to use this refillable 9-ounce bottle. To use a different
bottle or to use a different propellant could void your warranty. Next, I'd like to take just
a moment to review some safety issues related to these 9-ounce CO2 bottles. First is, we strongly
recommend using a 9-ounce CO2 bottle that has a paint mark on the valve and the bottle, as you
can see here. If you buy a bottle and it does not have that mark, we strongly suggest putting the
mark on the bottle. This is very important when you're unscrewing the bottle from the Concorde
crossbow, and let me just demonstrate. With this Concorde crossbow here, you'll notice that the
CO2 cylinder is completely screwed into the CO2 receiver, and you'll notice that the paint mark
is aligned. When I go to remove the CO2 bottle from the CO2 receiver, if, as I am turning the
bottle, I notice that the paint marks begin to separate, that is an indication that I am
unintentionally removing the valve from the bottle instead of the valve and bottle assembly from the
CO2 receiver, and that can be quite dangerous. There have been instances where the CO2 bottle
gets removed from the valve, and because of the pressure that the CO2 is under, it can launch the
bottle as a projectile and can be quite dangerous, causing potential injury or harm to personal
property. So it's strongly recommended that you use the paint mark, and when you're unscrewing the
bottle, you'll notice that it takes about four turns to fully unscrew the bottle from the CO2
receiver. It's also important that you use great care with CO2. First off, CO2, when it's in a
state, is a liquid, and as a liquid, it's very cold. It can cause frostbite, so you want to keep
your hands and other body parts away from the CO2 because it can be quite cold. Secondly,
CO2, when it's in a compressed state, is under a tremendous amount of pressure,
and these CO2 bottles are designed to withstand the pressures as long as the temperatures do not
exceed 130 degrees. If the temperatures exceed 130 degrees, there's risk that the bottle can
rupture or that the burst disc itself can rupture, so you'll want to be very careful when storing
CO2 bottles. What I'd like to do is refer you to our owner's manual, where we have a number of CO2
safety precautions that we would recommend that you review to ensure that you are safely using
CO2 and the CO2 bottles with your Concord Crossbow.
