Secret to Making Magical Sea Bottles

My corner of crafts
13 followers
#airdryclay #mixedmedia #diyart
Transform an ordinary glass bottle into a stunning piece of ocean-inspired art with my new tutorial " Secret to Making Magical Sea Bottles" where I'll show you some great mixed media techniques! In this DIY tutorial, I’ll guide you step-by-step through reverse decoupage on glass with a gorgeous ocean theme rice paper. I’ll add depth and dimension with air dry clay molds—then enhance it all with shimmering micro glass beads to create magical underwater bubble effects. Perfect for crafters and artists who love decoupage, clay embellishments, and painting! Whether you're new to mixed media or a seasoned creator, this project will spark your creativity.
#homedecor #diy #decor #lifehacks #handicraft #craft
What if you could capture the magic of the ocean inside a simple glass bottle?
In today's video, I'll show you how to turn an ordinary bottle into a stunning underwater
seascape using reverse decoupage and air dry clay. Stay with me, this project is easier than you
think and absolutely mesmerizing. Hello there my crafty friends, I'm Donna from Mason Creations
and welcome to my channel. If you're ready to dive in, let's get started making a mess.
First off, let's get rid of this cork. I'm going to use a much nicer one. The first thing I'm doing
is wiping this piece with an alcohol wipe. This will remove any dirt, debris or fingerprints.
You want a nice clean surface to start off with. I'm going to brush on Polyvine's multi-surface
lacquer in a dead flat finish. I'm using the dead flat finish because I want to remove the shine.
It's specially formulated to create a durable bond on slick non-porous surfaces such as plastic,
glass, ceramic and metal. That bond acts as a gripping layer that allows paints,
decoupage papers or transfers to stick more effectively. Without it, top layers may chip,
scratch or peel. For best results, I'm going to let this dry overnight. Notice that the glass
isn't clear any longer. The multi-surface lacquer removed the shine which gives the glass a frosted
appearance. If you plan on having a section that you want to see through, make sure to avoid the
lacquer in that area. Removing the shine is what's needed to give your paint good adhesion. I have the
perfect underwater rice paper. This will be the backdrop for all my little embellishments.
Right now I'm trying to figure which part of this beautiful paper I want to use.
I think I'll go with the bottom right. There are a lot of interesting things going on there.
I'm removing the white edge at the bottom of the paper and now I'll get it sized to fit the bottle
by removing paper and shaping it into a circle. I'm using a water brush and tearing the paper
instead of cutting it. A water brush has a cartridge that you fill with water and then
brush it on the napkin or rice paper. The water dispenses easily so this is really convenient.
You can find this in my description box below in my favorite tools section just in case you want
to check it out. You always want to tear your rice paper or napkin instead of cutting it. A torn edge
is much easier to blend than a sharp cut edge. I'll have the paper cover the entire back of the
bottle and around the side as well. This way when you look through the front of the bottle you'll
see the water scene everywhere. The front is still clear glass. I didn't put any of the
multi-surface lacquer there just where I'm going to decoupage. In a little bit I'm going to show
you how to add sand to your project that stays put and doesn't flake off in any way. Make sure
you stick around you'll want to see this. This and all the products you're going to see me use today
came from DecoupageNapkins.com, my wonderful sponsors. The bottle is rounded and the paper
won't lay flat against the glass. I'm tearing little slits around the sides of the paper.
The slits will overlap each other making the paper lay flat and you'll never notice them at all.
I'm using Polyvine Decorators Varnish as my decoupage adhesive today. You can use this
product as a varnish and an adhesive which is true for all the Polyvine formulas. It works
so much better than the most popular brand of decoupage glue. It's not a glue so it doesn't
go on thick and lumpy. It's a varnish so it dries crystal clear and will never yellow. I made sure
to get my image exactly where I wanted it and then brush the varnish right over top of the paper.
It will go right through the paper and adhere it to the bottle. Doing it this way gives you
way more control over where your paper ends up. You don't have to worry about laying it on the
glue incorrectly and having to lift it back up risking a tear in your paper. If you're looking
inside the bottle you can see through the bottom. So I used Dixie Bell paint in the color drop cloth
to paint the bottom of the bottle. This color looked pretty much like the sand in the paper.
I let my paper dry for a couple of hours and now I'm going to use Dixie Bell chalk paint in the
color cotton, which is white, to paint over all the decoupaged paper. Make sure you always paint
white or very light off-white wherever you're going to decoupage rice paper or a napkin.
White allows the colors in your images to look more vibrant. Dark colors will make your images
look dark and muddy. I'm not taking my paint to the very edge but getting very close. If I try
to get any closer I'll get paint on all those feathered edges. As long as the white covers almost
all of the paper it'll look just fine. I'm going to have embellishments around all of those edges
anyway. I'm going to mix up some paint for the back of the bottle that blends well with the blue
water in the rice paper. I'm mixing together Pentart turquoise blue, Dixie Bell cotton, Pentart dark
blue, and Tropic Bay blue and the color turned out great. I always mix up my paints in these little
two ounce plastic containers. They have a lid so my paint will stay fresh for at least the duration
of my project and when you're finished with your project you can just throw them away. I don't want
to have to mix this color again should I run out so I always mix a little more than what I think
I'll need. The white paint is dry now so I'm painting my color over the white. You need the
white paint right behind your rice paper to make your images pop but after that you can paint any
color you want. I took this color all the way to the edge very carefully. It's the same blue as the
rice paper so if a little bit of it got on the glass it wouldn't be noticeable. My crafty friend
Patty requested an under the sea mixed media project with mermaids on a round flat bottle
and my crafty friend Cynthia S requested an under the water scene project. Ladies this video is for
you. Where are you all watching from my crafty friends? Let me know in the comments. I just love
to see what cities and countries all my friends are watching from. I'm filming from sunny Las Vegas,
Nevada in the United States. I'm using my favorite DOS clay to make some embellishments for this
project. DOS clay is so easy to work with, dries quickly, and has very little shrinkage or cracking
when dried. It's perfect for making molded pieces. After pressing the clay into the molds I'm scraping
off the excess with my palette knife. I'm making mermaid tails, lots of seashells, a seahorse, and
some sea plants. Sorry Cynthia, I couldn't find any jellyfish molds. And then smoothing the clay out
with some water. Then I'll put them in the freezer for 20 minutes. Freezing the clay makes it rigid so
they just pop out of the mold easily. No tiny little limbs will break off. Some molds are just
too shallow to get a good molding with clay. In that case I use cream paste. This product is great
for extremely shallow molds. I'm adding it to the mold and then scraping off the excess with my palette
knife. This product will need to dry overnight. Fresh out of the freezer, watch how easily these just
pop out of the molds. No delicate little pieces will break off. They are frozen solids so I'll
need to let them thaw for a few minutes, but not in the mold. Make sure you remove them from the mold
right away as soon as you take them out of the freezer. If you want to see an in-depth video on
how to work with air dry clay, click the banner in the top right corner of your screen. I'll also leave
you a link for that video in my description box below. I'm going to use Aleene's Tacky Glue to add
my molded clay to my piece. I need to add this while the clay is still wet so it'll conform to
the piece as it dries. This is the best glue I've found for attaching wet clay. If any glue seeps out
from under the clay, I'm removing it right away with a clean damp brush. I'm also pressing down
all the edges of the clay very delicately to make sure they're all connecting with the piece.
Since the bottle is round and the clay while wet can be heavy, I had to use some painter's tape to
hold some of the molded pieces in place. They just kept slipping all over, especially those mermaid
tails. I went all the way up both sides with my clay pieces where the paper and paint met with
the clear glass. If you're enjoying this video, please let me know by hitting that like button
and why not share this with a friend? Thanks for doing that. You won't want to miss any of the new
projects coming up so don't forget to subscribe. This covered up that seam but looks way too
symmetrical. I'm going to add some clusters of shells to break up all that symmetry. I had to
let some of my clay dry overnight before continuing. I didn't want to take a chance on smashing anything
that I already put on there. Once I'm done gluing all my pieces on the bottle, I'll let them all dry
overnight. jacopagenapkins.com has such a great selection of napkins that you can purchase one at
a time. They carry many other craft supplies such as rice paper, paint, clay, molds, and a great
selection of polyvine products. Over 9,000 products and growing, they are wonderful to work with and
will send your order out fast. You'll receive free shipping on orders over $75 and special bonus
points for orders over $100. Subscribe to their newsletter by entering your email address and
you'll receive 10% off your next order. They are truly your one-stop shop for craft supplies. Make
sure you check them out. I'll be leaving links for all the products I use in my description box below
as well as more information on the previously mentioned promotions. Please note that any of
these promotions are subject to future changes. Before I remove the cream paste from the mold, I'm
using an alcohol wipe to remove all the excess paste from around the molded form. Even after
removing this from the mold, it will remain flexible and will conform to any shape. Everything
is dry now and it's time to get them all painted. I'm starting off with my plants. I cut them apart
so I could put smaller pieces in different areas instead of one large piece. I'm painting them with
Pentart Vintage Green. I'm dry brushing them with Pentart White Coffee to give them a slight golden
hue. Then dry brush them again with Dixie Belle Drop Cloth to highlight them. With dry brushing,
I'm getting very little paint on my brush and just lightly swiping it over the molded piece,
not getting total coverage. I'll give them a coat of clear varnish and then set them to the side.
I'll be gluing these on later. I'm using Pentart Yellow Red Clay to paint all the starfish. I'm
being real careful not to paint the glass, but if you do get any paint on it, once dry, it'll scrape
right off. But I normally wipe it off right away with a q-tip. I'm using conch shell for some of
the seashells, as well as Vintage Pink to add some color differences. I'm using Pentart Country
Blue for some of them, as well as Rainy Day Gray. I test all the products that I recommend in my
videos. I won't recommend anything that I haven't used myself and prefer. If I'm recommending it,
you can bet it's a great product. Each product will be listed in my description box below
and will have a blue link to make it easy for you to find. Any of the links I provide are safe for
you to click on. I used Pentart Turquoise Blue for the mermaid tails to start. I'm using Dixie Bell
in the color Magnolia, which is a warm white. I love this color. I am painting the tips of the
tails and blending it into the turquoise in an ombre technique, going back and forth using a
sponge with the turquoise and magnolia until I liked the way it looked. If you want to see a video
tutorial on exactly how to do ombre painting, click the banner at the top right of your screen.
I'll also leave you a link for this video in my description box below, as well as at the end of
this video. I'm not going traditional with the colors of the clownfish. I want to use more muted
shades to match what's in the rice paper. I'm using Dixie Bell Magnolia as my base color and
Pentart Leaf Green for the other little fish. Now back to the clownfish. I'm mixing Magnolia,
Yellow Red Clay, Conch Shell, and Vintage Pink to make my peachy color for the stripes.
I also dry brush their fins with my peachy color. Pentart Hazelnut for my cute little seahorse.
I'm going to be doing some dry brushing over all my little shells and sea creatures
to add some depth and highlights. Vintage Pink on the starfish, Magnolia over all the gray and blue
shells, Vintage Pink over the Conch Shell colored shells, Hazelnut over the drop cloth shells,
Conch Shell over the Vintage Pink shells, and Tropic Bay Blue over the green fish.
Now I'm going to use the Tropic Bay Blue to dry brush the mermaid tails.
And then I added a little Magnolia on the seahorse. When dry brushing, I add a little bit
of paint just on the tip of my brush, wipe the excess off on the side of the container,
and then wipe more off on a paper towel. You literally want your brush to be just about dry.
Then I'll just lightly skim it over the top of the embellishments catching the high areas.
I added some of the Tropic Bay Blue to all the gray shells, some of the peachy color that I
mixed up for the clownfish to the starfish. I added some Yellow Ochre to any of the tan shells
and added Turquoise Blue to my little green fish. Then I decided that the seahorse needed some
additional color, so I added a little of the Yellow Ochre to him as well. I let all the paint
dry for about 30 minutes, and now I'm going to give all my embellishments a coat of Polyvine
heavy duty wood varnish in a satin finish. I'm going to be doing some antiquing, and I need a
shiny surface to prepare for that. And I'll let these dry for an hour before moving on.
I didn't paint the back of the bottle just yet, but I did paint the varnish over the edge of the
embellishments and overlapping the bottles so I'd be able to wipe off my antique easily. The turquoise
item that you're seeing me use is called a cup cradle. It's made from silicone, and I rely on it
a lot. I use this anytime I'm working on something round. It keeps my piece from rolling away from me.
I get a lot of people asking me what it is. There will be a link in my description box below,
just in case you want to check it out. I'm going to make a custom antique using a glazing medium.
I put about a teaspoon in a little paper cup. I'm adding just a tiny bit of Pentart paint
in light brown. That turned out not to be dark enough, so I'm adding some Pentart earthy brown
to the mix. I'm brushing my antique on the piece, going over and around all the embellishments.
I'm doing this in sections and wiping the antique off with a soft dry cloth right away before it can
dry. Because of the gloss finish, it will wipe off the surface and stay in all the cracks and crevices,
showing the details of the mold. Antiquing gives your embellishments some depth and dimension,
making everything look 3D instead of flat. What a difference it makes! Everything just comes to
life now. The glazing medium slows down the drying time of the paint, which gives you more working
time. It will eventually dry, so you want to wipe it off before that happens. I brushed it over the
embellishments as well as the edge where the clay meets the glass. Any antique that gets on the glass
can be wiped off easily. If you have any little white spots where they didn't get painted perfectly,
this will make them disappear. I molded a mermaid for the back of the bottle using DOS air dry clay
and a beautiful accent mold. I painted her all the same colors as the other embellishments.
I used Pentart white coffee for her hair. I gave her a coat of the heavy duty wood varnish
and now I'm going to antique her as well, brushing it on and wiping it off, and then some touch-ups
to my blue background. I'm using Dixie Belle Magnolia to do some dry brushing on all the
embellishments. This will lighten and brighten by highlighting all the high areas of the details of
the molds. It will also make all the colors blend by bringing their tones together. I'm sure you
guys have noticed that I use a lot of Dixie Belle and Pentart paints. These are my absolute
favorites. They both go on super smooth and creamy with really good coverage. I rarely, if ever,
need a second coat of Pentart and that goes for the metallic colors as well. Now I'm going to make
everything look iridescent using Dixie Belle pearlescent glaze on all the embellishments as well.
I'm doing this as a dry brushing technique too. I don't want total coverage, just a light pearl glow
to all the beautiful shells and sea creatures. Since this is a glaze and all the embellishments
already have a sealer, sealing again won't be necessary. This is just plain sand that you can
get at the hobby stores. I'm going to show you how to add sand to your projects that won't flake off.
I put some in a little paper cup. Now I'm going to add Polyvine heavy duty wood varnish in the
satin finish to the sand and mix it up. I'm adding some Aleene's tacky glue where I'm going to put
the sand. Now I'm adding the sand with a palette knife over the glue. I'm also adding some to the
lip of the bottle at the top. The varnish will make the sand hard and stuck together so it won't
flake apart and fall off your bottle. The glue will keep it in place. I'll let that dry overnight
before moving on to the back of the bottle. I let the sand dry for several hours and now I'm adding
some Dixie Belle paint in the color cotton near the sand on the back of the bottle. I'm putting
it full coverage at the bottom by the sand and then dragging my brush upward and lightening up
on my pressure so it becomes transparent. I'm dabbing it with a damp sea sponge to blend it in.
I'm mixing together turquoise blue, tropical bay blue, dark blue, and some water to make a darker
blue than the paint on the back. I'm using a damp sea sponge again to dab this color on at the top
and center of the bottle and blending it in with the white at the bottom.
After the paint dried, I gave the water on the back of the bottle a coat of polyvinyl heavy
duty wood varnish in a satin finish. Two or three coats of this gives you a beautiful shine
that's moisture and high heat resistant as well as high chemical resistant, high stain resistant,
high abrasion resistant, and food safe. This works wonderful on any painted or decoupage surface
or shiny surface that has been coated with polyvinyl multi-surface lacquer.
I let that dry for an hour between each coat and an hour after the final coat. I've had a few people
ask me if this varnish has a strong smell. No, it does not. It's water-based so there are no
harmful fumes at all. I didn't do the shells or other embellishments with the clear varnish.
Because I gave them the pearlescent glaze, I wanted only the water to be shining.
These are little glass spheres in an aurora borealis color. They are going to be bubbles.
I'm dripping on my satin varnish as a glue for the bubbles. The varnish makes a great glue.
If there is any around the bubbles, you won't be able to see it because it's clear and shiny,
so it blends in with the glass. And surely my friend, you are not going to like these.
They bounce all over the place, but they are so pretty that I'm up for the fight.
I put them in between shells bubbling up from the bottom of the ocean and from the fish.
It's July. Who is ready for some Christmas projects? I'm going to start rolling out
some Christmas projects and tree ornaments. I'm going to start off by making some projects that
were requested last year but couldn't complete because I ran out of time. If you have anything
you'd like to see this year, let me know. I love planning projects around your requests.
Just please be patient. I get a lot of requests and I get to them as quickly as I can. Remember
those sea plants I painted a while back? They're finally making their way to the bottle. These are
so flexible that they move, so I need to use a hot glue gun. I need glue that holds immediately.
I put a small drop in one area and glued that down. Next, I took each branch and put a small
bead of glue down the center and placed it on the glass lightly without pushing it down hard.
If you press it hard, the glue will ooze out from under. Since they are so flexible,
you can bend them so they can be placed however you want. And a few more bubbles to disguise this
gap. I have this nifty bottle cork that has a light in it. It's rechargeable with a USB plug-in.
I'm not a fan of the white, so I'm going to glue some twine around the part of it that will show
above the neck of the bottle and added a shell. I painted the shell to match all the others on the
I also wrapped some twine around the neck of the bottle and tied it in a bow at the bottom.
Don't forget, all of the wonderful products I'm using today can be found at my favorite place
for craft supplies, decoupagenapkins.com, and I'll leave you links in my description box below.
I've added a link to a video that I think you may enjoy. Click the picture on the right to
be taken directly to that video. I'm so happy you were here with me today and thanks so much
for watching. I can't wait to see you all next week. I'm working on a new project with you in
mind. You can subscribe by clicking my picture in the top right corner.
