From Molten Glass To A One Of A Kind Vase - Narrated Glassblowing Demonstration

Timeless Tapestry
4 followers
13 Video Views·Sep 15, 2025
Today in the studio were doing one of our classic rollups to make a basket vase with zanfirico cane.
Thank you very much for watching!
If you would like to purchase this piece, you can find it here:
Website: https://glassgoof.com/products/deep-b...
Etsy: https://www.etsy.com/listing/43694440...
Please check out our Etsy store where we sell all of our work.
Website: https://glassgoof.com/
Etsy: https://www.etsy.com/shop/GlassGoof
Instagram: / glassgoof
Tiktok: https://www.tiktok.com/@glassgoof?lan...
Hey everybody, welcome back to this video.
Today we've got a fun little game where we're going to be rolling up some Sanpira cocaine
to make a small kind of bottle shape.
I had a lot of fun throwing this piece together,
and let's go ahead and head to the knock shop to go ahead and get started.
So I've got these little canes for you today.
We call this Sanpira cocaine.
They're basically lots of white lines covered in blue and teal
that we've twisted up a lot, a lot, a lot,
What we're going to do is we're going to lay them on this little ceramic plate,
and my brother is going to start to hang them up in the jewelry mold.
Once they're molded, they'll start to close together.
We'll just squeeze them together just a little bit,
and it'll basically make it into a nice flat plate
that I'll be able to roll up onto my mobile phone.
We're going to take a small little measurement,
and that way I can know how big want to call her,
which is what I'm making right now.
What I'm doing is I'm getting a little bit of glass out of our furnace.
Inside of this door is a 2,000-degree cavity
that keeps the clear glass nice and warm.
So here in a moment, I'm going to blow a bubble into the pipe,
and it'll come out the tip of the glass right on the end.
Then I'm going to stick this back into the furnace,
and that small, thin little bubble is going to kind of melt away
so that we have a straight shot all the way through the pipe,
and it creates a kind of ring or collar on the tip line of the pipe.
So the clear glass is really hot right now.
I have a small amount of time to be able to open it up
so that I can kind of move it to the right diameter
so that I can roll up that plate into a nice circle.
Now I'm going to use that little pie divider
to make sure that I have the right circumference
so that here in a moment, once my brother has those canes to the right temperature,
we can roll them up onto the tip of our blowpipe,
creating our pattern for the piece.
Look at that!
All right, so that went great.
So now all I have to do is kind of line up these lines
because I have a small little gap on the end, which is fine.
That's just how it goes.
So we're going to line these up, and then in a moment,
I'm going to start to heat it up and cool it down quite a few times
to get rid of all of those marks that we have
in which we need all of our individual canes.
I really want to get rid of all of those kind of bumps and cracks in it
so that it's nice and smooth on the outside.
A little bit later in the process,
we're going to be gathering clear glass on top of this,
and the reason we're getting rid of all of those ridges
is because I don't want to pick up any bubbles
whenever I'm rotating it around in the presence of our clear glass.
So right now we basically have two of these kind of canes rolled up,
and I'm getting rid of all of those ridges like I said before,
but here in a moment, I'm going to take my jacks,
which is like a big tweezer tool,
and we're going to cut the tip off so that it encapsulates the inside
and creates a bubble inside.
Alright, so now that we've done that termination process,
we've cut off the end, I'm going to do a little bit more smoothing
so we can make sure that this thing is nice and smooth on the outside,
and then we're going to go ahead and gather some clear glass on top of it.
Alright, so we've gotten rid of a lot of those ridges,
and you can see it's still kind of glowing,
so we're going to really let it cool down a little bit
before I plunge it into that 2000 degree furnace.
Now that it's cooled down, you can really see those colors.
So we'll go ahead and dip it into the furnace,
and here in a moment, when I get this new layer of glass,
I'm going to do what we call a strip gather.
So I'm going to come out of the furnace, and I'll hold it vertically
to get rid of some excess glass so I have a nice thin layer on top of my teal canes.
So this is just the first layer of clear glass.
We're going to do a small bit of inflating right here,
and then we're going to go in and get another layer,
and that'll be our final layer of clear glass.
About 20 minutes later, we got it.
Alright, so now we have all the materials that we're going to need to make our base,
and from here, we're just going to be doing some glass blowing
to inflate this thing and emulate it into the shape of the base that we want.
So this tool that I'm using is called a newspaper tool.
It's about 10 sheets of newspaper folded up in soap and water,
and it really helps to pull down the areas of the glass that we don't want to inflate.
So I'll ask my brother to blow, and I can basically emulate the bubble
that kind of a balloon has.
Look at it.
Ain't that the truth?
Very light air.
Okay.
Do a jack-o-lantern for me.
Can you give me an angle? We're going to drop it south.
Oh, that was a bad idea.
Get some air.
Okay.
Finds out that...
Yeah, they're nice.
Yeah, I'm happy.
I'm happy I got it.
One second, one second.
Alright, hold on.
So we're starting to establish the bottom,
and I noticed that the pieces kind of fit on the bottom.
So what we're going to do here is we're going to add a little patch of glass
onto the area.
My brother's going to get a little gatherer glass out of the furnace,
and we'll bring it over, and I'll cut off a little button on the bottom
so that it's a little bit thicker.
The reason that we're adding this button
is because later in the process we're going to have to transfer this
to a new blow pusher,
and I don't want the bottom of the piece to break out.
I need it to be very thick before we break it onto that piece
for the final stage of the process.
Alright, lift it.
This is not really how you do it, but whatever.
So now we're going to get ready for that transfer.
Here in just a moment, my brother's going to grab another pipe,
which is going to be our punty rod.
He's going to get a little bit of glass and tip,
and we're going to connect it right onto that little patch of that button
that we put on just a moment ago.
From there, we'll be able to break it off the blowpipe,
and we'll have it flipped over onto the new rod
that my brother cuts right now.
You know, they say the glass always remembers,
and this moment is one of the most crucial moments
in the glass blowing process.
You can't really go back.
So once this is on here,
we need to make sure that it's going to be able to break off
the blowpipe without actually cracking the piece.
So a lot of the moves we'll do early on in the process
are setting up for this move in particular.
Ready?
So now I'll add a drop or two of water,
give the pipe a tap, and we're off.
So now that the piece is flipped over,
we have an opening at the top where the bubble
would have first gone into the piece.
So now all we have to do is open it up
and manipulate it to its final shape.
All right, so we're basically done with the piece.
We're not exactly out of the woods yet.
The last thing we have to do is we need to break
the piece off of the pipe
and we need to transport it into our annealer
so that it cools down.
So what I'm doing now is I'm heating up
that connection piece to that.
When I add water to it,
I really want to break it,
I want to shock it,
I really want to break the piece.
So here in just a moment,
we're going to add a few drops of water
onto our connection piece,
being really careful not to let any of those drops
touch the bottom of the piece.
Then I'll give the pipe a few taps
and we'll knock it off into my brother's Kevlar gloves
where he can transport that into our annealer
so it can cool overnight.
We'll be able to come back in the morning
and see what we've got.
Sweet!
Boom! Boom!
Whoa!
And here's our final product.
I'm really happy with how this came out.
I've been practicing these basket bases
for a little while now
and I've been really testing out
some of the patterns
and doing stuff that I really hate to do.
I really like how they come out.
And also, as usual,
you can find this piece for sale
on our website
or at the link
in the description box down below.
Thanks for hanging out with us today.
You guys always show me a bunch of love.
I appreciate every one of you guys.
You know, I couldn't be doing this without you.
You know, getting on this YouTube channel
has really changed my life
and I really hope you'll do the same.
Thanks.
Stay foamer.
We'll see you next time.
