Plus check out all of my other favorite tools on my Amazon Storefront here 👉 📍https://www.amazon.com/shop/thepapery... (as an affiliate I earn from qualifying purchase made here)
To learn more about making quilling paper swirls, watch this video 👉 🎥 How to Make Quilling Swirls | 4 Ways to Make Swirls from Multiple Strips of Paper: • How to Make Quilling Swirls | 4 Ways to Ma...
For more Autumn and Halloween quilling projects, check out this playlist 👉 🎥 Quilling Autumn Crafts: • Quilling Autumn Crafts
Music: Green Green Garden by Chris Haugen --------------------------------------------------------------------------------------------------------------------------------- Hi there! I’m Meredith, art school grad and mama of two awesome and incredibly energetic littles. I fell across paper quilling by chance and fell in love with all the amazing things paper can do! Follow along as I roll tiny quilling creations and I promise I’ll teach you everything I know!
Hi folks, this is Meredith from the Papery Craftery. Today we're going to be making
some little quilling paper pumpkins and we're going to be making them on the quilling comb.
I have a couple different colors of orange here. I have pumpkin, ironically enough, which is from
Quilt Creations. That's the darker color. And then I also have a lighter shade. It's called
Deep Yellow. That's also from Quilt Creations. I have a little bit of a taupe here. That's
from Craft Harbor. We're going to be using that for the stems. And then we're going to be making
a little swirl for the leaf for the pumpkin. And I have a few different shades of green. You can
use whatever you like. I'm just using a few different ones just to add some dimension.
We're going to be making this on the quilling comb. You can get whatever kind you want.
The onion holder like I first held up, the super looper, something like this. We're using
the wider side. So if you want your pumpkins to be around the same size I do, you want sort of a
wider tooth comb. Any needle tool will work great to start off with. Some small scissors. I have my
Elmer's Glue All in a needle nose container. And then you are going to need a work surface. I have
a piece of corkboard here covered in parchment and some pins. Tweezer can be handy. And also a
paintbrush just to get rid of some extra glue. If you have that, that's always great to grab.
Now to get started, we are going to be making our pumpkins in different layers. If you think
of a pumpkin it sort of has the ribs and then the wider part. So the different sections that we're
going to be making are going to be for the different wider parts. And then where they
connect would be the ribs. We're starting off with the lighter of the two colors,
giving it a couple of rolls on my needle tool. That's not necessary, but I like to start off
my quilling comb projects that way. It just gives it a nice anchor to start with. Notice
I'm putting it towards the middle of the wider half of my comb because we're going to go on
either side of the anchor. If I had my strip in the back, I pulled it up one tooth on the bottom
and then one tooth on the top. I'm going to keep going in the same way
until I have four teeth on either side of my starting point. So there's two and back to the
back. There's number three and number three on the top and to the back and then number four
and number four. So just to go over that again, I have my center spot where my anchor was and
I did four on the top and four on the bottom. And I still have a good amount of my tail left
that I just started with a full strip of this paper. I'm going to just give everything one more
loop all the way around. Flip my comb over, hold everything in place, give it a tear towards the
bottom. Get rid of that for now. And then we're just going to put a dot of glue towards the end
of that tail and just glue everything in place. And notice I didn't add glue as I went. You shouldn't
need to do that. Your paper should hold together okay. If the center does pop out, sometimes you
can fix it. Sometimes you have to start over. But I wouldn't worry about gluing each section for this.
Slide it off carefully and this is the shape that you're looking for. And we are going to need two
of those done in the same exact way. There's the second one. And this, like I said earlier, is the
lighter of the two colors. This is kind of acting like the highlight of the pumpkin because these
pumpkins are 3D objects in real life. So the sun shines on them. One part is a little bit brighter.
That is this part. All I did here was just put a tiny bit of glue all the way down end to end
and stack them on top of each other and give a pinch to the ends. I don't really want to pinch
the center. I don't want these to be flat. You don't have to worry about pinching them too much
at this point. Just enough so they stay together. They don't need to be pointy on either end.
If you don't want to hold them, you can pin them together. I would recommend that because
sometimes this paper likes to slide back and forth when you're doing this technique and they wouldn't
be level with each other. So just put some pins. I like to do it on the ends. Just keep them nice
and snug and then we're going to move on to the rest of the pumpkin. I should mention here that
these papers are 1 1⁄8 inch wide. You can definitely do this technique with wider paper.
It should work just fine with thinner paper. It just might be a little bit trickier to manage
because of the lack of surface area. They might kind of slide back and forth from each other.
Now the next section here is with the pumpkin colored papers or the more orangey colors.
Same exact way that we did the deep yellow. Same size, same technique. And I have two of them as
well. And they're going to go on either side of the yellow part, the highlight. So what we're
doing is we're building from the center of the pumpkin out to the sides. So a little bit of glue
down the center of this one. If you want to take this off your board and do this while you're
it's on the board all pinned in place. It's up to you. I'm going to show both here.
Here if I just keep everything pinned on the board, which I do think is the easier of the
two techniques, we're just sort of molding it in place and attaching the ends with the pins. Again
we're not looking for points at this point on either end, the top and bottom of the pumpkin.
We're just looking for everything to connect. And you can see that orange paper is starting
to bow out a little bit. And so that's giving that sort of pumpkin-y shape. Just starting to
get this lined up and in the top and bottom of this side as well. There you go. Make sure
everything's level. Nothing's poking out too high. So that's what we're looking for at this point.
And we're going to move on to the next two sections. So we are sticking with that pumpkin
color, that orangy color, the darker of the two. Same technique again, but this time instead of
doing an even four pegs on one side, four pegs on the other side of the center, we added an additional
one to one side of the anchor. So this time I did five on the top and still four on the bottom. So
there's the anchor, one, two, three, four, and then one, two, three, four, five on the top. And I wrapped it around
again just to add a little thickness between each section, tore it off from the back, and I'm going
to add a little bit of glue. So we just added a little bit of space, a little bit of length
to this shape on the comb. What that's going to do is it's going to wrap in a larger way around
the side of the pumpkin where we are. We actually need two of those again, same exact size.
There we go, just a little tiny bit bigger than the last section. If we went too big,
it just wouldn't fit right. We just needed to add just a little bit of space.
And now this time I'm going to show how you would add them by holding them in your hand if that
works better for you. If you don't have the cork board available, that's fine. I will mention one
little hack. If you don't have this cork board, you can use like a thick piece of corrugated
cardboard. If you just find an old box, cut that up into a little square that's manageable. You
can use that in place. It doesn't work as well, but it's good in a pinch if you need a good surface
to pin to. So you can see here, it's just a little bit longer. And so it's just going a little bit
extra over the sides. It's bowing out nicely. Don't worry if there's what you think might be
too big of a gap on the end. If you think it's a little bit too long, you can see there there
where my finger just covered it, but it's a little bit longer than the rest of them. That's what
you're looking for. That is okay. The top and bottom of pumpkins are not perfectly round.
They're a little bit bumpy, so it's okay if it gets a little bit longer. And there is the,
oh that one's falling off now. This is the trouble with holding it in your hand. This is why I think
it's a little bit harder to do. Things just move around a lot, and I'm also sort of rushing in the
interest of time on the video. I don't like to make these an hour long, but I do also like to
keep in my mistakes so that if something does happen, you don't panic. Mistakes happen. The
middle of that piece just kind of came out. I just pushed it right back in. I was able to save it. No
big deal. And if I couldn't save it, pulling paper is pretty cheap. So this is why it's a great hobby.
All right, so now after struggling with it, I am going back to pinning it.
It's possible to do it without, but I just think it's easier to use the pins and the board for this
specific project, so feel free. Just a little pinch. Again, we're not making these pointy
on either end. We're not looking for a football. We're just sort of guiding everything into place.
Starting to take a very skinny pumpkin shape. It's getting there.
I'm going to add another row at this point, and you might have picked up what I'm putting down
here. We're going to make this a little bit wider still. So this time, instead of just adding one
extra tooth to one side of the anchor, we are going to even that out and do one extra one on
either side than where we first started. So this is the size where we first started. There's an
extra one on the bottom and an extra one on the top. That's what it looks like on the side.
One, two, three, four, five. Anchor. One, two, three, four, five. And just like the rest,
give it an extra wrap, straighten everybody out,
and flip that over. Tear off your excess and some glue. And just like before, because we're
making a symmetrical pumpkin for this example, you're going to be making two of these just like
the other steps. So they're going to be even on either side. I do have some examples in the end
of the video where they are not symmetrical because not every pumpkin is. Sometimes they're
a little lopsided, sometimes they're kind of funky looking. So I do have some where you are not making
them even on both sides, and I will show those later on when the time comes. There's our pumpkin
so far, and now we are going to add the last two sections. But we are definitely going to keep it
on the board at this point, but this should all look fairly familiar. Same idea, same concept.
A little bit of glue down. Oh, again. My fingers must be really sticky that day because I just
like to poke out on me. But it's okay. If you catch them in time, you can push those centers
right back in. They fold up nicely. Everybody's happy. Just like the last section, these are a
kind of bow around the outside of the pumpkin, and just tuck them in nicely on the top.
And on the bottom, if you want to kind of just give it a little nudge in either direction,
you can do that. So there's the first side, and I'm going to add the second one on in the same way.
Now fast forward a few minutes. My pumpkin sections are dried. They're all sticking
together nicely. I'm just going to give this kind of a gentle push. Like I mentioned earlier,
sometimes the wider pieces tend to sit up a little bit too high. So you can kind of push
them down slightly, but they are not going to be even. This isn't going to be a perfect circle.
And again, that is okay. You're not looking for a perfectly round pumpkin.
It's okay if there's a little indent on the top and bottom. I'm going to take a piece of that same
pumpkin colored paper, the darker of the two, whatever you use for the outside
sections. And I am going to wrap that around just to make it look a little bit more together,
a little bit more finished. So to do that, I glue the strip down on one of the ends,
and I let that dry for a moment. And then I use my needle nose container or a toothpick to apply
the glue. You really just need a tiny bit to the edge of the pumpkin. And then I'm carefully just
wrapping it around. And then in addition to making this look finished, it does sort of
pull everything together a little bit. Notice I'm pushing into the bottom there just to fill
in that little indent on the bottom of the pumpkin. And then applying a little bit more glue
to the other side of the pumpkin, wrap that strip around again, and we're back to the start.
Coming off a little bit down there. I might have needed to hold that in place a little bit longer.
You can pin this part together too if you are not interested in holding it as it dries.
That's okay. It won't take long because we really just used a tiny little line of glue.
That is what our finished pumpkin is going to look like. If you wanted your pumpkin to be wider,
you would just add more sections. You could use different teeth, make it bigger, make it smaller.
It's more the technique that you're looking for where you're starting with fewer teeth and adding
on more when you're making the bigger sections so that it wraps around in sort of the dome pumpkin
shape. Now I am ready to make the stem of my pumpkin. I have about six inches of the dark
taupe paper from Craft Harbor. You can use any color of brown you prefer. You can also make
these in different sizes. This is completely up to you. But I rolled it from end to end on my needle
tool. A slotted tool works fine for this part. And let that open up a little bit in my hands.
And I'm going to glue down the end. So just making a nice open coil right here. Very
traditional way to start. And after that sets for a second, I am going to give one end, the end
where I glue the tail down, a good pinch, pinching most of it. So you're looking for a really
elongated sort of teardrop shape. And then I'm going to push in sideways with my fingernail on
my thumb from the bottom. You can see there I'm getting an indent in the bottom. So it's like a
long triangle with an indent in the bottom. And then I'm going to take my needle tool or
a toothpick again, whatever you like, and just kind of curving that long
triangle part from the top over while keeping my fingernail pushed into the bottom because I don't
want to lose that shape. Multi-step process here. But what you end up with is kind of a pumpkin stem
looking stem. And we're also going to add a little bit of greenery to our pumpkins to add a little
bit more color. This is totally optional. You don't have to do this if you don't want to.
You can also just make it in one color. I'm using three just for kicks. So I have sort of a celery
color. I have like a sage green, and this is a forest green paper. I think the celery one is
from taplin paper, which is hard to find. So I'm not going to be able to link that. I'll try to
find something similar for the description box, but I will link everything else. You can find
these papers if you want to use what I'm using. So we made swirls many, many times before. We are
making a swirl now. I will also link to the original how to make a swirl video if you haven't
seen that. So I'm not going to go over too much detail here. All I'm doing is I add a little bit
of paper to the very, very ends of the stack that I made of these four colors. I roll them around my
needle tool. Needle tools are very important when you're making swirls. And after a few turns,
this is what I've got. Let that open up a little bit by pulling each layer of my paper just a tad,
just to let all those layers shine. So that's where we are right now. And I'm just doing an
S-shaped swirl. So I am actually supposed to be cutting all of them at the same length.
That's what we need. And then when I do the S-shapes, I don't glue the other side. You can
if you want to. We did line up our tool at the back and turn, turn, turn while pinching
the paper together. There we go. That is the shape we're looking for. Again, if you're not
familiar with this technique, I know I didn't go over a lot of detail because again, I didn't want
this to be a really long video, but look in the description box for the video specifically on
swirls and you'll find out how to make those in lots and lots of detail. So now I can go ahead
and put all my pieces together. I have my stem and I have my little swirly greenery.
So I just need to add a little bit of glue and get those positioned in wherever I think
it looks good. Flatten this out a little bit more just to fill in that space a little bit
better. There we go. Definitely looks like a pumpkin to me. And then I like to play around
with this. You can do the wider side top. You can do the smaller side, whichever. Sometimes they just
happen to look better on one side than the other. And I like to apply glue to both ends of the
pumpkin. So the smaller side and the bigger side. There we go. That's what we're looking for.
Very cute. And I do have some alternatives as well. I always like to show some variations.
So I have here, this is pretty much the same exact one, just a little bit wider. It's not as pinched
on the top and bottom, but very much the same exact technique and the same size.
And then here's a little smaller guy. And I mentioned earlier, I was doing some that were
not symmetrical. So this is an example of that. So there's only two sections on one side of the
highlight and three on the other. So it definitely gives it more of a realistic pumpkin patch vibe.
When you have different sizes and shapes, you can do different colors. So I have some sort of
these ones are actually the taupe and then an ivory. And I like this guy. I pushed in one side
real hard and that gave it a kind of a real different look to that. You can totally do these
in a million different ways. I also wanted to show another idea. If you didn't want to do two
different colors, but you still wanted to show the ribs between each section, you can slide in a
double thick piece of an alternating color between every section, glue them in instead of
gluing the sections right to each other. And then I wrapped both of these pumpkins in the darker
shade. It's pretty subtle. It doesn't show up on camera as much as it does in person,
but it definitely adds to the pumpkin vibes. So I hope you like this project. I have a whole
playlist of different autumn crafts that I will link in the description box in case you want to
do a little bit more in this season, have a little bit more inspiration. I'll share that.
You'll also find links to all the tools and supplies I used in the description box,
as well as a link to my buy me a coffee page, where you can find some quilling extras,
an extra video, and also support the channel a little bit more if you'd like to. I always
appreciate that. It keeps the channel growing. In the meantime, don't forget to leave any
questions you have in the comments. I'll answer those as soon as I can. Don't forget to like and
subscribe so you can be around for the next video, and I'll see you then. Thanks so much for watching.
Bye.