DESIGN & MAKE in Shapr3D and Fusion 360 | CAD CAM Tutorial for CNC

Decor Design 3D
20 followers
Oh my God, it's almost like he's going, bah.
So today I'm gonna bring you guys along
to model a holiday themed serving tray
using Shapr3D on my iPad.
And then we're gonna take that model,
export it into Fusion 360,
to get it set up to carve on my brand new CNC,
which I am just really excited about.
Now this video is not sponsored
by any of these programs I'm using.
This is actually my usual workflow.
And if you guys wanna completely skip the design process
and head straight to the CNC section,
I'm gonna have timestamps below to help you out with that.
And I also have a link in the descriptions
to the 3D model on my website.
And if you choose to purchase that model,
I wanna thank you in advance for supporting my channel,
which allows me to do what I love to do.
And that's bringing you guys these kind of tutorials.
So with that said, let's start designing.
And the first thing I'm gonna do
is look for an image to help me get started.
So let's go into Google and look for cute reindeer head.
Now I could draw something on my own,
but that's not what this video is about.
Right off the bat, I already like this first picture.
So let's go into it.
And so this is a digital image sold by Jose Rivera.
Let's tap on that and let's take a screenshot of it.
And I'm gonna crop this down
so that the edge of the image
touches the edge of the line as close as possible.
I'll show you why in a moment.
Yeah, I just wanna say that
if I was making a serving tray to sell and make a profit,
I will 100% buy this digital file from Jose.
But for the purpose of this video,
where I'm mainly focused on 3D modeling and CNC,
I'm just gonna go ahead and use this screenshot
and leave a link to a store in the descriptions.
So yeah, let's go ahead and save that.
And let's launch Shapr3D.
Come up here, click on Start Designing and then New Design.
So I usually work in metric.
That's why I have my units set to millimeters,
but you can come up here and change it
to whatever units that you like to use.
I also like to lock my grid size to one millimeter
just for the heck of it.
The first thing I wanna do
is import the image that we just saved.
So come up here to this icon with the down arrow,
click on Photos and click on the image that we just saved.
Once it's loaded,
we can start moving around with these arrows.
Let's go to the top view
by clicking this top surface on the navigation cube.
And I'm gonna rotate this image 90 degrees like that.
And I'm gonna set the height to 450 millimeters,
which is roughly 18 inches.
So let's zoom out.
And I'm gonna move this image to the right quadrant
and click Done.
Last thing I'm gonna do
is set the opacity of this image to 25%,
something like that.
So you can see what I'm doing later on.
Let's exit out of that.
And so this is why we cropped the image earlier
before we saved it.
It just makes it a lot easier to size and position it
without needing to worry
about all the white space around it.
So yeah, now we're ready to actually start modeling.
Let's start with the head first.
So let's come under the Sketch menu.
And there's a couple of ways to do this.
One is to use the Spline tool,
and then we can just kind of trace along our image like this.
But then we will have to come back
and adjust each of these control points to smooth things out,
which can be kind of tedious.
So instead, what I'm gonna do is use the Ellipse tool.
And we're gonna draw an oval like this.
And the size and position doesn't matter right now,
but we do want to make sure
that the long axis is horizontal,
which you'll know once it snaps in place like this,
or when you see this purple line up here.
So something like that.
And then let's move this center point
to kind of match where the center line of our image is,
like that.
And then we can start adjusting
the size of these dimensions.
So let's make that shorter.
And then this one longer.
Something like that, maybe.
Yeah, something like that.
Now, before we continue drawing,
we need to define a center axis
so that everything that we draw from this point forward
is going to line up and be symmetrical.
And we're gonna do that using this oval that we just drew.
So let's pick the Line tool,
and we're gonna draw a line
from the center point of our oval,
and make sure that it's vertical,
which we'll know once we see this little icon
with the vertical line inside it.
Let's select this line
and make it into a construction line.
This way, this line's not going to affect
the way the rest of the sketch
is going to extrude later on.
So once we have that,
let's go back to our Ellipse tool,
and we're gonna draw an oval starting from this line.
And make sure, once again,
that the long axis is horizontal.
And then we can come in
and start adjusting the size of this oval.
And we might have to zoom in here
so that the point's not going to try to snap
to the other sketch.
Maybe make that a little bit longer.
So yeah, something like this.
Now we can go and select our Trim tool
and remove the lines that we no longer need.
And the last thing I'm gonna do
is drag across this whole sketch
to select all the points and lines.
And I'm gonna select this Lock constraint down here.
This way, the lines and points won't move.
And the reason why we do this
is because once we trim these ovals,
the program actually sees these as splines.
So if later we accidentally shift something,
the lines won't be symmetrical anymore.
So it's always a good idea to lock things down
once we're happy with a portion of the sketch.
Anyway, now we're just left with this transition
between the head and the cheeks.
Now, I wish Shapr3D had some kind of a Sketch Fillet tool
where I could just add fillets in these corners,
but they don't.
So I'm just gonna leave it the way it is for now.
And we're gonna come back to smooth out these corners
after we've extruded the part into 3D bodies.
So now let's start working on the ears.
Now, for the tip of the ear,
I'm gonna use a Circle tool
to get a nice, even, smooth curve.
Let's move that to place.
And if you don't like how this thing's snapping to the grid,
just come down to this Magnet tool here and uncheck these.
So I'm gonna unselect all of these
because it's gonna be even more pain in the ass
once we start working with splines.
So now once we do that,
we can move this a lot more freely.
So now let's change the dimensions
and the position as well.
And let's lock that in place.
So for the rest of the ear, I'm gonna use a Arc tool.
And in case you don't know, on the iPad,
the Line slash Arc tool defaults to a straight line.
But if I shake the pencil really quick,
it turns into an arc.
If I shake it again, it turns into a straight line,
which is pretty cool.
So let's undo that.
Now I'm gonna put a line on the circle,
shake it to turn into an arc,
and then end it on the head.
Now I'm gonna pick this arc and the circle,
and I'm gonna come over here
and select the tangent constraint.
Now, no matter how I move these points,
this arc will remain tangent to the circle,
which is really important because this will guarantee
that the transition between these two different curves
will remain as smooth as possible.
That way we won't be left with some sharp edges
that's gonna cause us problems later down the road,
either when we're trying to extrude the sketch
or during the cam setup.
Anyway, now let's adjust this arc to better match our image.
Something like this.
And I'm just gonna change these values to whole numbers
just because I'm OCD like that.
Okay, now let's do the same thing to the other side.
So put a start point on the circle,
turn that into an arc,
and put the end point on the head,
and make sure that this arc and the circle
are tangent to one another.
And let's change that to whole numbers.
Now we're gonna take the trim tool
and trim away the line that we don't need.
Okay, now let's zoom out,
and I'm gonna select everything and lock it down.
So another feature I wish Shapr3D had
was the ability to mirror sketches.
That way I can just take this ear
and mirror it to the other side of the sketch,
which is another thing that we can't really do
until we have the 3D bodies extruded.
It's not really a big deal,
but I usually like to do as much as possible
within sketches before extruding them into bodies.
So I just think that a sketch mirror function
would be really nice to have.
But yeah, anyway, I digress.
Let's move on to the antlers.
So we're gonna follow the same process,
and we're gonna use circles to define these tips.
Let's zoom in here and draw three circles.
And then we can come in here
and start setting the dimensions and positions
to match the image.
And then let's lock them down as we go.
Oh yeah, you can also lock things down
by clicking this little lock icon down here
instead of coming all the way to the right side.
But yeah, so once we have this,
we can start drawing the rest of the antlers,
which has a lot of curves to them.
So we're gonna use the spline tool.
And there's two ways to control
the curvature of the spline.
One is to use control, and the other one is fit.
Feel free to try out both of them,
but for this example, I'm gonna use control.
So just like with the ear,
I'm gonna start at the circle
and just kind of follow along the image the best I can
and end it at the head.
Now I'm gonna select the spline and the circle,
make them tangent to one another,
and then start dragging around these control points
to smooth things out
and follow the curve of the image better.
Something like this.
So once that looks good,
I'm gonna select this whole thing
and I'm gonna lock it down.
Now let's look at this next corner,
which you can see is really tight.
So this is a little bit tricky
because I plan to cut out this entire profile
using this amount of quarter inch down cut bit
that I got from tools today.
So in metric, the diameter of this is about 6.3 millimeters
or maybe 6.4.
So I need to make sure that none of these gaps
are ever less than that.
I'm gonna do that by drawing two circles
that are 6.5 millimeters in diameter, like this.
And I'm gonna make each one of these tangent
to this other circle that I have.
For now, I'm just gonna leave these free floating
and then I'm gonna go back to the spline tool
and connect this top circle
with this bottom one like this.
And then let's make this spline tangent
to all three circles.
So we have to do these individually like this.
Now let's tweak things around.
And as we tweak these points,
we need to make sure that this gap never gets smaller
than these two circles.
So something like this.
But I actually don't like how this looks.
I like how in the original image,
this gap gets smaller here
and then it opens up at the bottom.
So I'm gonna set this one to seven
and this lower one to nine like that.
And then let's tweak this around some more.
Something like this.
Yeah, I like how that looks.
So let's lock these two circles down
and now we can tweak this.
Okay, now let's go to the trim tool
and get rid of these lines that we no longer need.
Something like that.
Okay, the rest of the antler
is pretty much done the exact same way.
So I'm just gonna speed up the video
and finish up this section.
And let's lock everything down.
Okay, so that was a really long section,
but we just finished the most difficult part
of the modeling process.
Now all we have to do is extrude the sketch
into 3D bodies, which I promise,
it's gonna be much quicker.
So let's exit the sketch
and we are going to extrude the face up 25 millimeters
like that.
And then remember these sharp edges
that we ignored earlier
where the head and the cheeks met?
Well, now we can go ahead and pick these sharp edges
and we are gonna pull away to smooth that out.
And let's set that to 30 millimeters.
Pretty easy, right?
Okay, now to create the pocket in the face,
we are gonna come under tools and select offset edge
and make sure the type is selected as loop.
This way we can pick the entire boundary
with one click just like this.
And we're gonna offset that six millimeters inward
and click done.
Now we're gonna push this new face down 12 millimeters.
Okay, let's go ahead and extrude the ear
and the antler as well up to 25 millimeters.
And to mirror these two over to the other side of the head,
let's double click to select both of them
and then come under more and pick mirror.
Now we're gonna select the center line
that we used on our previous sketch.
And this center line is gonna create this plane
that the two bodies are going to mirror about
just like this.
Make sure the keep originals is on and click done.
Now, if you come under our design tree,
we can see that we have five separate parts.
So we wanna merge them into one.
We can do that by clicking this union function
and make sure the keep originals is off this time
and click done.
So now we've got this single part,
which is great because we're gonna come in here
and pick all of these sharp edges
where the separate parts join together.
Yeah, there's a bunch of edges,
but we're gonna pick them all
and we're gonna pull to smooth them out.
Let's go back to a top view.
And I'm gonna set the radius to five millimeters like that.
So this ensures that these corners can be cut
using our quarter inch diameter bit,
which has a radius of about 3.1, 3.2 millimeters.
But anyway, we have our general shape now
and we can start setting this up in CAM.
But he kind of looks really boring,
like any old tray that you can get off of Etsy right now.
So I want to add some eyes and nose to him.
So yeah, let's give that a try.
First, I'm gonna need a center line.
So let's project our old center line
from the previous image onto our new plane.
Let's make this into a regular line
because we can't project construction lines.
Now let's exit the sketch
and come under more and select project.
Make sure that the projection type is set to sketches
and then let's pick this surface.
Now click done.
Let's go to our design tree
and hide any other sketch planes
that we're not currently using
just to avoid drawing on the wrong plane later on.
Let's close that.
And then let's double tap on the surface.
And first thing I'm gonna do is select this line,
lock it down and turn it into a construction line.
Oh yeah, let's exit the sketch real quick.
Another thing I want to do is move our reference image
up to the surface.
So I think that's 13 millimeters from the original position.
And now let's double tap on that surface
and use the ellipse tool to draw an oval for the nose.
Oops, one thing I forgot to do
is turn the snap functions back on
because we need that in order to make sure
that our oval's long axis is horizontal.
So like that.
Okay, now let's move the center point onto the center line
and let's adjust the dimensions.
Okay, perfect.
Now let's use the circle tool
to draw two circles for the eyes.
And to make these two symmetrical,
let's pick the center points
and then pick the symmetry constraint
and then select the center line.
So now, no matter how I move one of these circles,
the other one's gonna move in relation to it.
Another thing I want to do is select both circles
and make them equal to one another.
That way, when I change the dimensions of one,
the other is gonna change with it.
Okay, that looks pretty good.
Now let's exit the sketch
and I'm gonna hide the reference image
and let's select all three surfaces
and pull it down two millimeters like that.
See how that looks.
And, oh my God, is it me
or does this thing just oozes some kind of creepy energy?
It's almost like it's going, bah!
Oh my God.
I'm not giving up yet, guys.
Let's undo this and hopefully erase it from our memories.
And let's go back to our sketch.
So instead of this oval being the nose,
let's make that the muzzle.
So we're gonna use the ellipse tool again
and draw another oval like this
and this is gonna be our nose.
Let's change the dimensions.
Let's make that 15 and let's shift that down a little bit,
something like that.
Now I'm gonna switch over to the line arc tool
and I'm gonna draw an arc
to give him a little smirk, right?
To make him friendlier looking.
Let's change that a little bit.
Let's do 65, maybe.
And let's move that around.
Change the angle a little bit.
So something like this.
If we wanna cut this smirk with the same quarter inch bit,
we need to offset this edge like 6.5,
which it's a little wider than I want.
So let's undo that.
I wanna offset that like less than that.
So 3.5, maybe.
Yeah, that looks much better.
So I'm gonna close this off with two straight lines
and okay, let's exit the sketch.
I'm gonna offset this muzzle down three millimeters.
I think the nose looks pretty good
with it being raised like that,
but I want the lips to go down
an additional two millimeters, like that.
So let's hide our sketch and we're gonna zoom in here
and pick these sharp edges in the corners.
And we're gonna round them out.
So half of 3.5 is 1.75.
Let's bring back our sketch and go back to a top view.
See what that looks like.
Yeah, much better, right?
I'm definitely gonna need to do something with the eyes,
but before I do that, I want to mention that
because we added this three and a half millimeter pocket,
we basically just add an additional operation
to our CNC because in order to cut this,
we need to switch over to a one eighth inch bit.
So if I'm producing this to sell,
I'm probably gonna change the design
so we can cut as much as possible
with our quarter inch bit.
Yeah, this is just something to keep in the back of your mind
as you're designing stuff like this.
But for this project, I really like the way this looks,
so I'm gonna go with it.
So for the eyes, I'm gonna turn them into ovals,
something like that.
And I'm gonna rotate a little bit
because I think it adds a little bit more
to the smile.
Let's change these dimensions.
So something like that.
And I'm gonna move this away slightly.
So I only made one eye because I can select this
and use the move rotate tool and select copy
and move a copy to the other side.
Now deselect copy and rotate this one
so that roughly mirrors what the other eye is doing.
It doesn't have to be perfect
because I'm gonna come in here
and turn this eye into a wink.
And I'm gonna do that by using the offset edge tool.
Now pick this eye and pull this in 3.5 millimeters.
Now let's switch to the line arc tool
and close off the ends using a couple lines.
So zoom in here and make sure that these lines
are connected to the actual ovals
and not one of these control points
because that's the only way we can use the trim tool
to get rid of the extra lines that we don't need.
So something like that.
Now let's pick our new surfaces
and we're gonna push them in three millimeters.
Let's come to the design tree, hide our sketch
and then we're gonna come in here
and pick these sharp edges in the corners
like we did with the mouth.
And we are going to round these corners out
1.75 millimeter radius.
Okay, let's do the same thing to this other eye
and round out the bottom edge.
And we can actually keep increasing this
to form like a dish shape on the bottom
which I think looks a lot better than a flat bottom.
Depends on what you want, I guess.
Okay, now let's do the same thing to the nose as well.
So select the top edge of the nose
and let's increase the radius
until it turns into a dome shape, something like that.
And we're gonna add a smaller radius on this bottom edge.
All right.
Oh, for the muzzle,
let's do a six millimeter radius for the bottom edge
and let's do a smaller three millimeter radius
for this top edge.
And this looks so much better, guys.
It's got a little wink and a little smirk.
It's just so much friendlier
and I'm really liking the way this looks.
Yeah, so I figured we were already using
this 1 1⁄8 inch bit to cut the mouth
so why not use it to cut the wink as well?
Anyway, all we have left to do now
is to round over the sharp edges
around the outer boundaries.
So let's start with this inside bottom edge.
So let's select that and let's pull that to eight millimeters
and the radii for the lip is really limited
by the thickness of the lip.
So I think when we did this,
the thickness was six millimeters.
Okay, for some reason it's saying it's 5.9988.
So this means that the radius for each edge
can't go over three millimeters.
So let's pick both edges.
Yeah, see, when it goes to three,
it says blend with overlap.
So I think the highest we can set is like 2.9,
which, you know, it's fine.
Okay, so our model is now done.
I know it's still kind of hard to see
what this model looks like.
So what we can do is come over to visualization
and apply a material on it to get a render
of what this would look like in real life.
So let's look for, yeah,
so let's, this American walnut veneer,
let's put that on there.
And actually that looks really good, guys.
Oh man, the modeling is finally done.
I really didn't think it was gonna take this long,
but we are now finally ready to move on
to setting up the CNC.
So let me show you guys how to export this file
to the computer.
So come up here to the icon with the up arrow
and then go under format.
Next, we're gonna save this as a step file.
So click on that,
and then we can give it a name like serving tray
and click continue.
So there's a couple of ways to send this to your computer.
The way I normally do it is go under share with
and then AirDrop it to my computer like this.
You can also email it to yourself
or just save it to the cloud.
But yeah, once we're done with that,
let's put away Shapr3D and launch Fusion 360.
So a lot of the steps I'm gonna show here
will be similar to what I've already covered
in my previous video.
I'm still gonna show you all of my settings
for each of the steps,
but this time I'm just not gonna go into depth
explaining what each of those settings do.
So if you wanna get more details about that,
definitely check out my other video here.
Okay, so once Fusion 360 is launched,
go up to file, open, and then open from my computer.
And then let's go to the place where we save the file
and double click to open it up like that.
Now let's switch from the design workbench
over to the manufacturer workbench.
And then go under setup and create a new setup.
And under the setup tab,
my operation type is set to milling
because we're using the CNC.
My stock point is gonna be set
to this lower left corner of the top surface.
And then let's switch to the stock tab.
So I've already glued up a panel
to prepare for this tutorial
because I knew roughly how big of a tray I wanted
and how much extra material I need around the outside.
So I'm gonna change this mode to fixed size box
and I'm gonna input the actual dimensions
of the panel that I glued up,
which was 350 by 500 by 26.
And let's click okay to finish up the setup.
So now we're ready to define our first operation,
which if you've seen any of my previous videos,
you already know it's gonna be
a 3D adaptive clearing toolpath.
And this is gonna help us to clear out
the bulk of the material in the most efficient way.
So let's come under 3D
and we're gonna select adaptive clearing.
And under tool, click select
and I'm gonna go under favorites
and select this amount of quarter inch down cut bit
that has a part number 46202-K.
And I'm gonna click select.
So here are my feed and speed values.
Feel free to take a screenshot of that if you want.
But we're gonna go under the geometry tab
and under machine boundary,
I'm gonna change that to selection
and I'm gonna zoom in here
and pick this top outer edge on the model.
And I'm gonna keep rest machining checked
and the source is set to from setup stock
since this is our first operation.
So someone asked me from my previous video
whether or not we need to keep rest machining on
for the first operation
since rest machining is only used for removing material
that was left behind from the previous operations.
But I've always enabled it
because I thought it tells the following operations
that this is our first step.
And also if we don't need it,
then why is there an option to set the source
from setup stock?
If someone knows, please let me know in the comments below.
But for now, I'm gonna leave it on
and let's come under the passes tab
and I'm gonna change this maximum roughing step down
to six millimeters
and make sure the stock to leave option is checked
and click okay to let the tool paths generate.
Okay, so while this generates,
obviously a Fusion 360 is going to know
that the quarter inch bit is too big
to cut these three and a half millimeter wide slots.
So what we're gonna do is define a new tool path.
So let's come up to 2D
and then do a 2D pocket tool path.
For the tool selection, come under favorites
and I'm gonna use this Amano 1 1⁄8 inch downcut bit
that has a part number 46225-K.
Click select and let's jump over to geometry
and for the contour mode,
I'm gonna change this to selected pockets
and for pocket selection,
I will pick the bottom surface of these slots like that.
Next, let's go to the passes tab
and I'm gonna change this maximum step over to 1.3,
which is roughly 40% of the diameter of this bit.
I'm gonna uncheck stock to leave
because we're not gonna do any finishing passes
on this operation
and we're gonna click okay to generate.
There you go.
That was pretty fast.
Yeah, so here's our tool path,
but we have a problem because all of this material
was already cleared out in the previous operation.
So there's really no reason to let the tool
cut back and forth like that through air.
It's a total waste of time.
So in my previous tutorial video,
I pretty much ignored the heights tab
because the default values were fine,
but I think this is a perfect example
to show what those settings are for
and how to use it to fix this problem.
But before we start,
let's right click on the operation
and come down to machining time
and see how long this is gonna take.
So about two and a half minutes,
which I mean, isn't too bad,
but I think we can improve that a lot.
So let's double click on this operation
and jump over to the heights tab.
Here, the top height is what tells the machine
where to start cutting from.
So by default, it's starting from the stock top,
which is why the tool was cutting all the way from the top
and starting to cut down
as if we haven't removed all the material
from the previous operation yet.
So we're gonna change that to selected contours,
which are the bottom surfaces of our pockets.
So now this is saying we're gonna start cutting
from the bottom surfaces of our pockets
down to the bottom surfaces of our pockets.
By design, we know that the pockets were three millimeters
deep, and then there's an extra half millimeter
of material left over from the previous operation.
So we're gonna set that offset to 3.5 millimeters.
So now it's saying to start the cut
from 3.5 millimeters above the selected contours,
and we're gonna cut down to the selected contours.
And let's click OK.
So immediately you see that it's a lot better.
It's coming down and then it's ramping a little bit
before it cuts down to the material.
It's skipping all of this material up top.
So let's right click on this operation
and check the machine time, 51 seconds.
So we just reduced about 50%.
I think we can do even better.
So let's double click on that and come to the linking tab.
So here's something that's called a ramp clearance height.
And by default, that's set to 2.5 millimeters.
What this means is that the tool is gonna start ramping
2.5 millimeters above our top height.
And we're gonna change that to 0.5 instead.
And click OK.
So now you see the tool is gonna come down
and it's gonna start ramping.
And before I finish the whole pass,
it's already starting to cut into our material.
So that's gonna be a lot more efficient.
Let's right click and our machine time's down to 38 seconds,
which is really good because we basically
just reduced the machining time by 70%
without needing to change the feed and speed.
There's probably more I can do,
but also probably not worth my time.
Now let's move on to the finishing pass.
So come under 3D and then select parallel.
Now for the tool, let's go to my favorites.
And we're gonna use this 1.8 inch radius ball nose bit
that has a part number 46294-K.
And click select.
And then I'm gonna make sure the coolant is disabled.
Over in the geometry tab,
I'm gonna change the machining boundary to selection.
And for the boundary, I'm gonna pick this outer top edge.
And make sure that rest machining's turned on
and the source should be from previous operations.
And the adjustment, change that to use as computed.
Next, let's go to the passes tab
and I'm gonna change the step over to 0.5.
And click okay to generate.
So I know I went through that pretty quick,
but this is pretty much what I usually do
for all of my finishing passes.
And I've already gone over all of these settings
in my previous videos.
So if you want more details on what these settings are
or why I chose the values I chose,
I'm gonna leave links to those videos in the descriptions.
But yeah, once this is done generating,
our final step is to cut this part out of the stock.
So for that, I'm gonna come under 2D
and then pick 2D contour.
And for the tool, I'm gonna go back
to the quarter inch down cut bit
that we used in the first operation.
Click select.
And then under the geometry tab for contour selection,
this time I'm gonna pick the outer bottom edge of the model
because I want the bit to travel
all the way to the bottom of the part.
I'm gonna disable tabs
because I'm gonna use double-sided tape
to hold this part down.
And finally, under the passes tab,
I'm gonna enable multiple depth.
And then for this maximum roughing step down,
I'm gonna set that to six millimeters.
And click okay to finish our tool paths.
And now all that's left to do
is to post-process and get our G-code.
I actually recently got a brand new CNC in my shop.
It's a Onefinity,
and I'm really excited to try it out
for the first time on this project.
The post-process procedure
is gonna be pretty much the same
as what I've done in the past,
except this time I'll be using a different post-processor
and the machine control software is,
it's actually pretty different.
But anyway, to do this,
let's come under actions and pick post-process.
So as I said, my post-processor is now Onefinity.
Next, go to the output folder
to pick where we're saving the G-code.
And mine's gonna be this little flash drive.
And as I've said in my past videos,
we need to save each of these operations separately
because they involve tool changes.
So the first one's gonna be our 3D adaptive.
And click post.
And then let's pick the second operation
and then go under actions again and click on post-process.
And this one, we'll name it 2D pocket.
And then let's select parallel.
Actions again, post-process.
And let's name it 3D parallel.
And finally, we'll do that one last time
for the 2D contour.
And that, ladies and gentlemen,
is the last thing we need to do on the computer.
Now we just need to load the G-code onto the CNC
and get this guy carved.
This guy came out so good
and I'm so glad I made the changes to the eyes and the mouth
and I realized that even if I don't use this as a tray,
it actually looks great just hanging on the wall like this.
So if you guys wanna make one of these too
and also support my channel,
be sure to head over to my website
to pick up the 3D model and have fun with it.
Also, if you wanna learn more about
how to set things up in Fusion 360 for 3D carving,
be sure to check out this video here
and don't forget to subscribe and like.
And I will see you guys in the next video.
