
Creative 3D objects
9 followers
Hey guys, how are you?
In today's video I bring a very cool model of Hard Surface
for us to train a little more our polygonal modeling skills.
Today's video is root modeling, ok?
Without using external plugins.
Remembering that all the content here on the channel is very didactic and easy to understand.
Even the videos without audio are very clear and self-explanatory.
And if you fell from parachutes here, I already invite you to know our channel.
Enough!
Sign up there and activate the bell.
This is the ideal place for you who seeks to improve your 3D modeling skills more and more.
So, have you already signed up?
So, let's go to the video.
So, let's start.
Let's add a circle, ok?
More or less the size of the space we have in our model on the left side.
In interpolation I will use the value of 15 to make the model with the mesh a little denser.
Now what we're going to do is select half of our circle, ok?
This half that we're going to extrude on the right side.
Holding the CTRL and selecting the edges, you're already selecting half.
Here we are going to align on the X axis.
Let's leave more or less half of the model and let's centralize in our scene, ok?
Now what we're going to do is add a Shell modifier to make our piece thicker, ok?
Let's leave more or less as a reference.
Since we don't have all the views, you have to try to get what the reference tells us.
Now what we're going to do, first I'm going to change the color, right?
Now let's extrude forward creating this first ring he has.
Let's add an insert, leave more or less the distance he has from the edge of the ring he has.
Now let's select this edge and let's use a chamfer to create these creases on the sides of the edge of our model.
Now selecting this central face, holding SHIFT and dragging backwards, let's create this cut,
make this opening both in the front and in the back.
Let's select this central edge he has to create these two creases he has in the middle, ok?
First I'm going to adjust the size of this space, I think it's a little smaller.
Now let's insert the edges, my ring shortcut is CTRL R and CTRL C to add a loop.
Then we create a chamfer to create two loops, we do the same thing on the back,
adjusting more or less as it is in our reference.
Adjusting the position, CTRL C, which is my chamfer shortcut, and it's already the same size as the front.
In the back we only need a single segment.
Here we adjust more or less the space that is in the reference he takes,
and in the back what we're going to do is give an extrude to close this edge a little more, ok?
Remembering that this back is exactly the front of our model, as it is mirrored,
this back we have to be careful with our reference to leave more or less the size that is in our reference.
Here I'm going to use the value of 5, I found a value very close to what we have there.
Now let's select these two spaces that we created, let's use the bevel to give an extrude
and also to refine these edges a little.
It has some steps that are a little thinner in the interior part, in our reference.
Here now we are going to select the edges to create a loop, or some loops, to soften these edges,
since in our reference it is quite soft.
Here, being careful to select the correct edges, all this loop inside our model.
Let's apply a chamfer, ok?
Now we add a chamfer, right? Here we adjust the size.
I added a loop first, but I saw that the edge was still a little hard,
so I'm going to add two loops here with the chamfer on this edge to make it a little softer.
Here giving a general check on the model.
In this back part we will put a chamfer, but it is much shorter.
A smaller chamfer, only with a segment, just to soften this edge a little, since it is not so soft.
The same on these two edges.
Let's do the same on this back edge.
First let's eliminate this ring around this edge.
And here we give a chamfer to create that effect there, which is in the front part.
Here we select a distance more or less similar, and creates a chamfer also on this edge.
Let's create now.
Very close, very similar to what we did in the back, in the interior part of the model.
Now let's delete all these faces, since we are going to use a symmetry.
And let's also create a chamfer in the main edges of this model.
Here first I'm going to select all the edges to create this chamfer.
Selecting carefully.
Check everything right, everything is selected.
CTRL-SHIFT-C is our shortcut to create the chamfer.
And our chamfer is already done on these edges.
This little problem that gave our own face loop, we will solve later.
First we will insert a loop here at the top, where it has this division that separates the model.
Let's use the extrude.
We adjust the value here so that it is a very smooth division.
And we will also add a chamfer to this division.
Here we already have the model well walked, almost finished.
Here we will now adjust these faces that have a smooth problem.
Just select, use the auto-smooth.
In the front it gave a little problem, let's do the same thing.
We select all the faces.
If below CTRL-SHIFT-C it gives two clicks, it already selects all the faces.
Auto-smooth too.
Here with the model almost finished, let's add our symmetry in radial and in the Y axis.
Let's uncheck the Slice option.
First I'll adjust here, put the value 0.
Our Slice option, Mirror.
Here you can see that it is creating the correct shape, but you have to adjust in the Y axis.
And zooming in here, we adjust so that it is glued in the correct way, well welded, without any problem.
Just adjust in X and Y.
Here we can see that the model is almost finished.
What I'm going to do is just add a normal weight.
Just to check if everything is correct.
There is nothing out of place.
And this is our model.
I hope you enjoyed the tutorial.
If you liked it, leave your like and see you next time.
Thanks!
