Making Mail Armour (Part 2)

Forging the Past
1 follower
1 Video View·Jul 15, 2025
In this second video on making mail, I first tell you why I often make it one triangular piece at a time, and then go on to show you how to do the easier and more useful type of contraction/expansion: that 'with the grain'.
Now what I'm doing here is I'm making a big triangle of mail.
Rather than just linking all the way around, and gradually adding to the size of the circle,
I'm expanding in triangles. And I do this for a number of reasons.
The first is orientation. I know exactly where I am with these triangles.
This one I'm working on, for instance, at the moment, is the centre of the back of the coif.
So I can orient myself, which is useful.
Another is that triangles enable me to keep track of the expansions and contractions much more readily.
So if I want to, say, expand by five links in so many rows, I can create a triangle,
and within that triangle do those expansions and contractions.
And then once I've done all the expansions and contractions with various triangles,
I can just link all the triangles together, and then I know exactly where I am.
But the third and most important reason is morale.
You see, if I just link all the way around a great long edge,
it might take me an hour or two to do that.
And at the end of it, I might not be able to see what I've done.
It looks no bigger than when I started.
But if I create a triangle, then at the end of my session I can think to myself,
well, good, I got somewhere. I did that triangle today.
And having done one triangle, I might think to myself, well, that didn't take very long.
I'll just do another one on the other side, just, you know, to make it symmetrical, just even it up.
And that way you do end up sort of egging yourself on to do a little bit more.
And each time you finish, you've got something that seems to have a bit of shape to it,
a bit of sense to it, and you can pick it up and admire it, and maybe even wear it.
If you're making, for instance, a Berni, you could do a dagged bottom edge,
and then you've got a dagged shortish Berni,
and then you fill in the gaps in between all those dags,
and now you've got a straight bottomed Berni, and then you can put more dags on and so forth.
So it's wearable in all the different stages.
So, yes, it's good for morale, working in triangles.
I've put it on white card so you can get a better look at the pattern.
So you can see that there are links leaning that way on one row,
and then the next row the links link that way, and so forth.
And we've got a row here that's going that way of four, and then I've done the first two.
And the last one, linking there, goes in like that.
And with this way of doing things, each one is only ever linked to two other ones,
which makes life very simple.
If you decide, as some people do, to make your coif, or Berni,
or whatever it is you're making, in several separate bits,
you then have the horrible task of linking them together.
And there's no way of doing that without at some point having to link
a link to either three or even four other links, which is a swine to do.
So I would avoid that if you possibly can.
So put it into the pattern.
It's going to be awkward just because I've got the camera running.
There we go, and close it.
Now these links are browned,
and you can see that the ends of them actually overlap slightly.
That is quite deliberate.
They were cut, not overlapping, then they were put into an oven,
and held at a fairly high temperature for a bit,
and that relaxed them a bit, and then they all overlapped as a result.
You then open one, close it again,
and it then, with a satisfying click, closes exactly on itself.
So there's no gap, there's no daylight to be seen in these joins.
In fact, some of them are actually pushing into themselves slightly,
which makes these links much smoother and more comfortable,
less likely to snag on your clothing, and a bit stronger too.
So there you go, one finished triangle.
Now it's a 3D dome of a thing,
so if I try to lie it flat on the table it won't actually lie flat, it can't do.
But each row around the centre is longer than the one closer into the centre,
because I've put in loads of expansions.
How do you do expansions? Well, I'm going to show you.
If I want the next row added onto the edge here to be longer than the row that you're looking at,
what I'll do is I'll add a ring to a single link, like this,
rather than, as is more normal, two.
And then the next row added on after that will be done in the usual way.
So now what we've got is a link here, which is as normal, linked to two.
A link here, which is as normal, linked to two.
But in between them, a link which is only linked to a single other link.
So when I do the next row, this one links to two as normal,
and this one links to two as normal.
But this one here, in the middle, only links to three.
So if I were to complete this row and this row, then there will be an expansion.
So what do we do if we want to put in a contraction rather than an expansion?
Well, it's exactly the same, but the other way around.
So here I'm going to link not two, as I would normally, but three links together.
Three, like that.
Whoops.
Okay, so that's gathered it in slightly.
I then finish the rest of the row as normal, and then the next row as normal.
And hey presto, I've got myself a contraction.
There's a contraction, or an expansion, in this pattern here, which I'll show you.
So this link here is only linked to three other links,
whereas this link here is linked to five other links.
So this here is a contraction if you're thinking in terms of that direction,
but it's an expansion if you're thinking in terms of that direction.
It's actually the same.
Right, so get linking.
Have patience, and let me know how you get on.
Send in pictures of your finished items.
