A realistic day living alone on a wooden boat.

All about Boats
1 follower
Jul 9, 2025
Support TALLY HO; http://www.sampsonboat.co.uk/support
Become a Patron; / sampsonboatco
----
EPISODE 221
In this video, after getting up, making tea, and watching the ferry come and go, I try to fix a stuck bow-roller - while the anchor is in use, I’m balancing on a chain over the ocean, and it’s pouring with rain. If you think that sounds silly, you’d be right.
——
To become a Patron - / sampsonboatco
To donate or support - http://sampsonboat.co.uk/support
For sneaky previews of what’s going on in between episodes, follow my
FACEBOOK / sampsonboatco and
INSTAGRAM / sampsonboatco .
MANY THANKS!
Ep221
Music;
Jazz Apricot - Joey Pecoraro
Beach Walk - Unicorn Heads
Lagos - Quincas Moreira
Heriot Bay - Leo
This morning I woke up on board as usual and I could hear rain on the deck.
Tally Ho was moored in Herriot Bay, a small village on the fairly small island of Quadra
between Vancouver Island and mainland British Columbia.
The boat was at a marina which is fairly unusual as I usually prefer to stay in anchorages but
I had quite a few things to pick up and drop off in Herriot Bay so I tied up for the night
right next to the ferry dock.
I was getting ready to leave the marina but I wanted to launch the dinghy beforehand.
Being alone on board right now it's a little tricky but I've got much better
at it since my first try over the winter.
So you may have noticed that this video feels a little bit different from most of my other ones
and the truth is I've been thinking a lot about my video making recently and it's become a chore.
And I've been worrying too much about trying to find a bigger audience and
get lots of clicks and views and I think that pressure has actually stifled my creativity.
But I realized recently that it doesn't have to be like that.
I'm so lucky to have such a supportive audience that really I have the freedom to
not actually worry too much about trying to get lots of views.
So that's what I'm going to do.
I'm going to stop worrying about getting views and focus on making good quality content that
I enjoy and if we end up with a smaller audience so be it.
In terms of audience quantity is nice of course but quality is what really matters
and I think I have the best quality audience on YouTube.
So I'm going to allow myself to have fun making videos again.
So having moved to a nice nearby sheltered anchorage
and having made use of the best toaster in the world for a quick snack,
it was time for me to get on with my job for the day.
I needed to work on the bow roller.
This is the bronze roller right at the front of the boat which the anchor chain rolls over
and of course the roller is supposed to roll but I've noticed that recently it's stopped rolling.
This is a bad thing of course because it increases the friction,
it wears the chain and it makes a horrible noise.
I'm hoping that it just needs a bit of greasing but the first thing to do
either way is to get the chain out of the way and pull the roller out to have a good look at it.
As the anchor roller seemed to be a very tight fit in its housing,
I decided to try and reduce the thickness of one of the discs on either side of it
to try and give it just a little bit more clearance and ease of movement.
Thanks for watching and thanks so much to all the amazing people who have supported this project and this channel.
So many people have been a part of it from volunteers to patrons,
viewers, professionals and many other people helping in many different ways
and I just really really appreciate all of it.
I'm incredibly grateful to be where I am and I'm excited to keep telling the story.
So I'll see you next time.
Cheers!
