Killer Instinct 380X, BOSS 405, BURNER 415, RUSH 380 - How To Assemble

The Technology of Old Crossbows
4 followers
8 Video Views·Jul 8, 2025
Killer Instinct 380X, BOSS 405, BURNER 415, RUSH 380 - How To Assemble
In this video, we are going to review what's included with your Killer Instinct 380X crossbow
and how to properly assemble it out of the box. Before starting, it's important that you read
and fully understand the instruction manual that comes with your new crossbow. Included in the box
is a stock, front end, quiver, quiver bracket, three bolts, field points, scope, rope cocker,
an illuminated nock, foot stirrup, rail lube, hardware pack, and instruction manual.
To begin assembling your crossbow, place the cable slide onto the cable so they are crossing
on the left side of the front end. Insert the cable slide and cables into the groove at the
end of the barrel. Slide the cables and string onto the barrel until the riser is seated flush
against the end of the barrel. Next, insert the two riser bolts through the two holes located on
the front end of the riser and securely attach the front end and riser to the barrel using the
included allen wrench. Insert a third riser bolt through the bottom of the riser to securely lock
the front end in place. Next, attach the included foot stirrup to the riser by sliding the stirrup's
prongs with notches down into the two holes located on the front of the riser. Secure the foot stirrup
by tightening down the two set screws. Next, mount the included scope on top of the picatinny rail
above the trigger box. Loosen the bases on the scope ring and set each base into a groove on
the picatinny rail. You may have to adjust the position of the bases to get the perfect fit.
Once the scope is resting in place and level on the scope rail,
tighten back down all bolts on the bases and scope. Once your scope is securely mounted,
your 380X is now ready to cock and shoot. If you have any further questions,
be sure to contact us at one of the three ways on the bottom of this screen.
