Making A Twisted Mug - Part 2

Ceramic Art Studio
35 followers
1 Video View·Jul 8, 2025
Hey everybody, welcome back to Matthew Kelly Pottery. I hope you are doing well. Today is part two of twisted mugs. I'm going to show you
How I trim the foot on these how I put a handle on them show you some of the tools
I'm using for trimming and those sorts of things. So let's go
Okay about two days ago I cut this free from the bat I flipped it over
This and the other I've got two more over here under plastic still
I probably would have trimmed the foot on these yesterday, but just had a interruption in my schedule didn't get that done
So I also knew that I needed to record this which also made it like alright
I got to make sure I have time to record the video while I'm trimming them
So and this is a Chuck that I threw probably a week ago. I've had it covered up with plastic
I threw it to trim some other cups similar to these on
Anytime I'm doing these that might have an uneven rim. I like to throw a Chuck
It just helps hold the piece on there a whole lot better while trimming
This you can throw this and then torch it right away and then use it
But if you can do it like this where I've had it thrown just covered up for like several days
It's stiff enough, but it's still
Still soft enough that I could indent it
But and that's going to help hold on to that cup while I'm trimming in the trimming process
I use various sizes of trimming spinners from diamond core tools. I use their half moon or
Trimming tool the one that has the the 90-degree angle then curved on the other side looks that I can't remember the name of it
and then I have my stamp tool here because instead of signing the bottom of these I like to
I
Like to use my stamp and make my little button on the inside kind of like a do at the base of the handle
So these twisted mugs end up having two buttons on them and not that that really matters. So the main thing with this is to
get this
Kind of centered re-centered on the chuck
there's
Just there's no way to really do this easily as far as like tap centering that kind of thing
So I just kind of do it by look and feel then adjust it
There we go, that's not perfect but it's close enough
next thing I like to do is
Still you'd like to use the trimming spinner so that I can apply some down pressure as I'm starting to trim this
And so basically what I want to do
I don't want to mess too much with the the place where I have facets carved
But I want to trim all of this kind of like this half inch here of clay. I want to trim that back. I
Also like to have this
The extra clay here so that as it comes down to this point then the foot can kind of flare a little bit back out
This way so it kind of adds to the lifted look of the mug
And so and then I want to carve some out from the inside as well to make an inset
on the foot there, so
Just going to use and I'll do different angles when I trim the second one
I'll do it from the other angle so you can see different angles of how I'm doing this
but
you definitely I
Do come into contact with a little bit of the facets
But I don't worry about that too much. I come back and smooth that up later
There was a little uneven spot there on the bottom of this where I had cut it free from the bat
So I wanted to go ahead and even that up first
One of the reasons I like this trimming tool and with diamond core tools
They're very sharp, which is good because this is considerably drier than it needs to be for trimming
It's not too dry
But it's definitely a lot easier if you have a little bit softer clay
I just have to be a whole lot more steady with this
I love this trimming tool because it has that 90-degree angle and the curved side so that I can use
Both of those depending if I want that sharp edge or not, and it's all in one tool
So there we go what I like to do for the button on the bottom
Just like I do on the bottom of my handle just take a little ball of clay
Stick that right there in the center and then use my stamp to like that
And for the little bits of where I had to trim into the facets there I like to come back with one of these
Other diamond core tools with the loop and just kind of even that up so in case I've pushed any clay down into there
I don't want any
I'd like to have the beginning of those
Facets or swirls look pretty clean as well
So I just come back and trim a little bit in those just to make sure that it's not gummed up with
clay from the
from making the foot
And there we go trimmed foot cleaned up around those
Facets at the base
And then we have that and because of how stiff it is we'll be ready to put a handle on after I trim the other one
But we'll move the camera to the other side trim the other one and then do some handles
All right, so this was the one that I did the wide facets
And then twisted it it started to get a bit uneven here at the base you probably if you saw the last video
If you didn't see the last video
I'll put a link in the description or at least at the end of the video where you can check that out
But if you did see it
You could probably see where this one started to wobble a bit because probably I stretched it a bit too much at that base
And it started to get kind of wonky, but it's okay
These pots are not meant to be your everyday kind of like no no pots perfect
But they're not meant to be your perfectly thrown pots as is so we're we're just taking some liberties to
To throw a little bit loose with these, but I do want to get this base
Like said running kind of evenly around so as I trim it. I don't have a big challenge of trying to trim something
That's wobbling
so
All right when it comes to the handles on these mugs
I have not been doing any certain length for each. I've just been doing a random length of handle for each mug
That's because they're a bit different than my normal handles
Which I normally attach the top of my handles just like this one is here, but the bottom
I usually stretch down and have like it come to an end and I just I don't do the same kind of
Attachment on the top and the bottom and with these I'm doing that same kind of attachment on top and bottom
And so and also still trying to put a groove or slightly pull these
on the mug
so these are challenging, but I think the style of handle fits the
Style of the mug really well so for like one that's going to fit one or two fingers
There's
This would probably fit two fingers by the time it's done
Maybe not this is four and a half inches the die that I use to make these is a custom die
I had made for me
I like to have a handle that's a little bit bigger than I want in the finish as far as the overall handle
I wouldn't want to hold on to a handle that big myself
but what that does is I can I can kind of blunt one end and make it fatter where it attaches and then I can
Pull it and make it skinnier in the middle and maybe even all the way down if it's my one style of handle
Where's this one? I'm going to kind of make it fat on both ends and then attach it from there
So I use a paddle which I did not grab
All right got my paddle. I use that on both ends
So I use it to come to flatten out
And I like to flip it over
don't like to do all the paddling from one side of the handle because it seems to like even out the
Flattening of it a bit more by paddling on different sides
or holding the handle in different ways when I do that and you can already see just from
Doing that I started out with four and a half inches on this handle and now I'm all the way down to three and a
Half just from doing that
So you can see if I just bent that and just made a loop out of that
It would be a pretty small handle, but I am gonna pull and kind of stretch this in the middle
But first I'm gonna attach the top part of the handle. So I am gonna use a little bit of slip
I can't really score the
mug because of it being a twisted mug like that, but I'm gonna put a
decent amount of slip in here because I also want that slip to kind of fill in all those crevices where the
Twisted facets are
That I thought I had all my tools over here that I needed but I did not
So what I've been doing is just taking that
Top part of the handle attaching it wherever I want on the side
Just getting all of that
slip
Pushed in into all those grooves so that I don't trap any air
Trying to get a good attachment all the way around
I can't smooth this in like I would for any other style of mug either
So I just have to kind of push it and then what I like to do to clean up any excess slip
You use a paintbrush with a little bit of water and then I can
brush that extra slip
Also helps add moisture right around where you're attaching the handle. So there's good multiple
Good reasons to use a little bit of water with a paintbrush like this
All right now that I got the top attached I'm gonna go ahead and pull this a little bit
I'm gonna hold it in my hand this being
Stiffened up pretty well. I can do that and I want to go ahead and
Pull this a little bit just to get some of my get that nice finger group down the middle
Kind of get me a nice
Spot where it attaches where that thumb group starts
And pull that down like that
And then last time I put these on I was sitting down it was actually pretty helpful because I flipped the mug like this and
I set it down
Right in between my legs and I was able to hold it and then do the slip
I can do it in my hands as well
But it was actually really helpful to be sitting down doing this
Because then I could sit this in in my lap and do this, but I'll just do it standing up
We're already here now, I'm gonna take the bottom in and add the slip to this one
This gets tricky because you're holding the mug holding the handle all with one hand and then having to add the slip
And then I need to bend this one in
Try to keep it somewhat
straight up and down
And then attach that one
And you gotta if you get this too wet while you're well I was doing that pulling it it's really hard to
Push this into place if it's too wet
So that's one thing you got to kind of watch out about
And just trying to get a good attachment first, and then I'll come back with it with the shaping
That and I'm gonna do the same thing with my paintbrush and my water
And I like to also use the sponge to clean off the the paintbrush so for the excess slip that gets on the paintbrush
I don't want to just like brush that on to another spot
Use the sponge that I have here to clean the paintbrush off as well
Now you can definitely see it's it's a little out of shape, and it's a little thicker at the bottom
It's probably a little bit bigger handle than I need for this size mug
But then again to somebody some people like a really hefty handle, so I like to kind of continue that
Thumb groove on down around like this
And then of course want to look at it from the side and get a
Get a good shape there
And I won't be able to show here how I do the thumb grips
Because these will have to sit for a while before I do the thumb grips
but I
Can show you how I do that. I just won't do it on this video
I have done showing my thumb grips and same style thumb grip. I do in my regular handles
So if you're interested in that
There's a video where I show how I do my regular handles and I can do and I'll show you how to a thumb grip
on that video
But on my all my handles. I always put that little button at the bottom as well
So I figured while I'm doing it. I might as well
Add that button to these as well even though there's already a button in the bottom
To add that button to the bottom of the handle and there we go
The main thing I have to add is the thumb grip to go from this to that
This last one I'm going to try to do one a little bit longer so that you could fit two or three fingers in there
So
We'll go for like a five inch handle here and then we'll stretch it a bit
I
All right, oh there we got one that you can fit
probably two or three fingers in and I'll put a thumb grip on that one as well, of course and
Like said the big key is try not to mess up any of your swirls while you're attaching a handle
And if you get a little bump in there, don't worry about it
But it just it's nice if you can get that attached without messing any of that up without disturbing too much of the swirl
of it all and
Just play around with different size shape handles
if you don't like that handle you want to make the same style mug put a different style handle on it and
Just have fun with it. But thank you guys for being here as always. I hope you enjoyed it
I hope it helps you and I said in my last video if you try this
I'd love to see your attempts at it. Send me a picture on Instagram. I already had somebody do that
it was really great to see and
Like I said, I hope it helps and I hope you guys have a great day and we'll see you soon. All right. Bye
