An Unconventional Way to Make an Unconventional Mug! - Ann, RAW and UNFILTERED LIKE NEVER BEFORE!

Ceramic Art Studio
35 followers
Dec 22, 2025
Well this whole video started with a challenge by someone who watches our videos, Lori Bowles.
She sent me a picture of an altered mug that she thought would be kind of fun to make,
but then she didn't quite know how to get started. So I also thought it looked like a challenge,
but kind of a fun challenge. So I thought that I would give, you know, try it,
see if I could create something similar to it. The mug that she sent me, the picture she sent
me was probably made in a cast, in a mold. It was probably cast in a mold, but I'm going to
see if I can make it on a wheel. Let's go and get the clay to stick. I think the key to any
throwing is to have the right level of dryness for the clay when you begin.
Because I think sometimes we just think, oh let's wire the clay from the bag. And a lot of times
the clay is, it's okay that way, but a lot of times you get bags of clay that have been sitting
in the warehouse for a long, long time and they get dry. And if, if your clay is too dry or too
soggy, you're going to have issues when you're throwing, just right off the bat. I mean, there's
nothing you can do. So actually the clay that I'm using, my porcelain, when I buy it at the
warehouse is always dry because, you know, this is a really, really fine porcelain and
it just doesn't have a lot to it. So I think they sell it to you kind of dry.
So I never throw with clay right out of my bag. I actually,
I put the scraps of my clay in my reclaim bucket. Then I reclaim that clay and throw with it.
Okay, so now we got the clay centered. My first thing, what I'm going to do is I'm going to throw
upside down. So I'm going to open up the clay, clay mound, all the way to the bat.
It's all the way to the bat. I don't know if you have a picture of that or not. Okay. And,
oh, also you're going to be hearing Jim walking around and, uh, because he's trying to get good
angles for you as we, uh, kind of progress on the project. Now I'm going to pull out this clay
so that I have a nice opening. And I got to remember though, that too, because I'm going
right to the bat, if I, if I open it and make a clean enough opening while I'm pulling the clay
out, it may come detached from the bat. So I'm always real careful to leave just a little bit
of clay right at the base of where, uh, where I'm pulling just so the clay doesn't become detached
from the bat. The other thing is, is that I like to open up the clay mound a little bit wider
than the opening of the mug that I'm going to be making, just because when I'm pulling clay up,
I'm always pulling upward and inward. And, uh, eventually I will, I'll pull the clay inward
at the bottom as well. So my goal now is to pull up the, um, the walls and I'm going to be pulling
them inward and together. I'm going to actually be closing it in. So as you can see right now,
the walls are sort of turned outward. So I'm going to pull upward and pull that top part of the, um,
the walls inward towards the center. And that'll help me later on to be able just to pull the, um,
to close up the gap altogether. And as you can see to me that I start to form a almost
pyramidal shape. It goes from wider to skinnier at the top. So now I'm going to
pull more clay from the bottom. So I'm going to make a ridge along the bottom and start to pull,
just push with my fingers. Remember up and in. And I'm really bracing my hands together.
Okay. And again, you can still see that it's a slight inward pull. Let me go one more time.
I'm going to create a little ridge at the bottom and you can see how I'm pulling from,
pushing the clay inward at the bottom. So that's why making that, uh, creating a bigger opening
at the bottom is really necessary. And remember when you get to the top, I don't want to make it
too thin because I'm, I'm, I want the extra clay along that top because I'm going to be
stretching it inward, eventually stretching it inward and actually closing it in.
So I'm, I'm intentionally not stretching this too much. See, I've still got a good amount of clay
at the top of my piece. So that's good. I want that much clay in there.
Let's see. Let me check the bottom and see how much clay I have down there.
I'm just going to pull that little bit of extra clay up and then straighten this back out a little
bit. So I'm kind of shaping it a little bit into, uh, I want a dome shape. So I'm making this just
a little bit on the round side. Now, before I close it up, I'm almost ready to close up my form
and actually close, pinch that in, but I want to clean up. You see all the water on the inside?
See, there's a lot of water and still some clay on the inside. Yeah. So I'm going to use my sponge.
Okay. You ready? Okay. I'm going to come in and clean up the bottom.
See, I still have a lot of clay down there too. It looks like it's gone through the bottom,
but there's still a lot of clay around the edges, around the walls.
See all the clay? I want all of that off. Okay. Before I close up the piece,
I'm going to try to clean up as much of the debris on the bat as I can on the inside.
See how much stuff came out of the bottom? Yep. I want that as clean as possible because that'll
save me a lot of work later. This is one of my favorite tools is a rubber spatula from the
kitchen. It can get way down in there and it can clean up a lot of the water and mess that's in
the bottom. And we're kind of doing this in real time. So let us know in the comments if you prefer
to watch something like this in real time versus having it all edited and just, and just narrating
along. So let us know. Yeah, we're actually, I think our, our goal with our channel right now
is to actually make it to a hundred thousand subscribers. And honestly, when we started this
channel, I was, we were going to stop at 10,000 and now at 93,000 subscribers later, it would be
really nice to make it to a hundred thousand. And so we're just trying some new things and seeing if
we can get on up there. All right. So now I'm going to actually pinch the top closed. We're
a, um, a pocket of air inside of this thing. So right now, as you can see, the top of the thing
is the top of the cylinder is kind of pointed outward and I want it to kind of, uh, uh,
lean inward towards itself. So I'm going to change the, push that inward. Then I'm going to use my
fingers and create a little jig with them and get them wet. Okay. Remember to really wet your
clay at that, um, before you do that so that they'll slide easily. And then you can just put
six, you know, put a, um, kind of six points of your fingers over the, um, the rim so that
it'll easily close up. And luckily I have a lot of clay on the edge because it's stretching.
I'm actually stretching that clay out. And as it stretches, it can get weak if you don't have
enough clay up there. So I'm going to start down here. Let's see if we can get it to close up.
There we go. You put a little pressure on the top of that just to make sure that we're,
it doesn't come back opened. I want to go over that a couple times.
And now I've trapped air. It's actually a little bit flatter here than what I want.
So I'll show you now that you've trapped air inside of the cylinder, you can manipulate
the shape of your cylinder. So if I go in with my red rib, let's say,
and, and rib it. So I want to get rid of that kind of, that ridge right there.
I can push it around with my red rib and it's never going to collapse
because you've got air at the bottom, or inside. Excuse me. Make sure that you get that,
this opening. We don't want that to come open at all when it's drying. And if you don't get that,
if it's either a little bit too thin or, or if you haven't closed it up well enough, you know,
if you haven't really gotten that clay sort of connected in there, it will come back open.
Now, since this is going to be a mug and I want the bottom to have a little bit of flatness to it,
I thought I would create maybe a little dimple in the bottom. So all I need to do is take a wet
finger and find the very center of the cylinder and I'm going to push in on it a little bit.
And then I'm going to round off the rest of that. My air wants to push that dimple flat.
So let me make a little hole so that it'll,
the air wants to keep pushing it back up. So I'm just going to create a little
hole for it and see if I can, that's better. There we go. And then remember to close that
hole back up. Okay, so there we go. Now we have a little dimple, a little flat spot for the cup to
sit and then it's rounded back. The only other thing I need to do is trim away this extra clay
around the edge. Okay, the only other thing I need to do is trim away this extra clay. I left
this clay around the edge so that I still had an anchor to the bat because now that I've cleaned
up all the clay inside, if I don't have this, a little bit of clay here, you know, and I'm working
a lot at the top, it will surely become, you know, become detached from the bat. So now
that I've got everything done from the top, I can go ahead and clean that off from the bottom.
So if nothing else, you know how to throw a closed form and the best tips that I have for
making an upside down form. I want to get this a little bit drier before I mess with the top of
this. So I'm going to try it with a hairdryer and just, you probably won't see this on the video,
but I will dry just the bottom of this to kind of get it a little stiffer before I turn it over.
Okay, very good. And the reason that I wire it back and forth like that is because if I went
straight into it, the wire would want to push that hollow rim area inward and I don't want to,
I'm trying not to distort the cylinder as much as possible. Okay, so now that it's wired off,
I'm going to go ahead and turn it over and let me center it. Let me see if I can center it.
Oh, that's pretty good. Now I'm going to take some clay and put lugs around the bottom.
One tip when you're putting lugs around your mug, you want a clay that is drier. Like we used a
softer clay when we were throwing, but we're going to use a much drier clay for the lugs.
You don't want it too dry, but you definitely don't want it wet or else it'll stick to the
lugs and it'll just be goopy and yucky. So you want something that you can
actually put up against the clay foot, but it won't stick to the clay foot.
So let's see here. And what I do is I try to attach it not to the side of the mug as much
as to the back. I like it to stick to the back, just bracing the mug because I don't want to
distort the mug in any way. And I'm going to put clay all around it. Okay, so that's not going
anywhere. So now I can kind of clean up the edges. So let's see. I can clean the rim and kind of
clean up the inside of that. So let me start at the inside. You see where our mug came together
on the bottom? I can just use my finger and go in there and kind of clean that up a little bit. Or
if you're not comfortable with your fingers, you can use like the end of a paintbrush.
Take the paintbrush and see if we can get in there and kind of smooth this out a little,
making sure we have really nice and smooth inside. I'm not really putting any pressure
on it. I'm just working my way up just to make it as smooth as possible. Okay.
Okay, now I need to finish off the rim. So I'm just going to use my fingers
and sort of in a jig shape. I like to put my fingers together like that and kind of work them
around and push the clay together. Now if I want to, I can actually thin out the rim a little bit
so that it'll be nice and comfortable for the lips. And every potter kind of has their own way of
making their rim. Some people like it to pull outward a little bit. Some people like it to
push inward a little bit. But that's kind of up to you. Set it up here. I've got a little
bit to trim off. Didn't come off in one piece like I like. I can still get some of that extra.
I kind of like to bevel it a little and then I'll go in and refine it with my fingers again.
Round it over. Make it nice and comfortable for your lips. Okay, and there's your mug.
The reason why I threw it upside down to begin with was because the picture that she showed me
had a really severe curvature on the bottom. And I think I would have had to, if I threw it
right side up, I would have had to wait for the clay to sort of get to leather hard
before I trimmed that bottom area. And if I waited for it to become leather hard, I wouldn't
be able to alter the rim later. It would be too hard to alter. It would just break apart. But now
the rim is still nice and soft and I've already got that nice round shape. You could probably
make this right side up, but I did it both ways and I think this was easy for me. This was an
easier one for me. Now to create that altered look, I think what it looks like to me that might
work is to actually pinch in the rim so that you would have the area where we can connect a handle
to later. So what I'm going to do is go ahead and just use my fingers to kind of pinch in the clay
right in here like that. And I'm going to work that down. You see, if I had waited till this
was leather hard and waited to trim it, this would have cracked apart. There's no way I'd
be able to manipulate the clay and alter it like I need to. So I'm really going to try to
connect the clay right in here. And it's okay right now. If you look, you can see that the
rim is not round, but that's okay. We're going to fix that in a minute. All we wanted to do is to
be able to make sure that you get these two areas connected as tightly as possible. And to do that,
I'm going to go ahead and connect. It's going to be hard to see in the video, but I'm going to
take a coil and connect more clay right in here all the way to the back edge so that the clay
won't have a chance to come apart as it dries. I'm just adding clay all the way from the back
of, make sure you get it all the way from the back part of the wall all the way around this
area just to make sure that the clay does not crack apart as it dries. Because, you know,
the clay is always looking for the most vulnerable area to crack when it's drying.
It's just under so much pressure, the most vulnerable area is going to crack. And so
we want to make sure that there's nothing, you know, it's not going to happen.
Okay. So at this point, you'll see that the, we don't have a round rim anymore. We have,
this part is totally connected here. And what I'm going to do is just take my needle tool
and I'm going to cut off this excess clay. See, we've got this excess clay here. I want there
to be a hole for my fingers and I'm going to actually put a handle there. So I'm just going
to go ahead and cut this whole thing off. I'm just going to slice it. And because I connected
everything all the way down to the bottom, there shouldn't be any holes there. Now I'm going to
come back in and see if I can make that a little flatter. I might cut off a little bit more if,
I just want to make sure that I don't go through all of that excess clay that I just
took care to add to the mug. I would rather leave a little bit at the top and then smooth it out
later than to try to cut as much of it away as I can. And yet it'll kind of leave a little tail
down here at the bottom. And that's okay because that's where we're going to attach the handle to.
So I'm going to try to make this as flat as I can with my fingers.
And remember too that this area is going to be covered up with the handle. So don't feel like,
oh my gosh, you know, it's just going to look horrible, horrible. And you want to try to make
it look as nice and smooth as possible. But just remember it's going to be hidden too. So if you
leave a little bit in there, it's not going to, it's not going to matter much. Okay, so now we
have, it's nice and altered right there. But as you can see, we still have a problem with the rim.
The rim is not round at all. So I thought about how to do this. This is the tricky part. And I
think I figured out an easy way to do it. I had these party cups in the house and I thought this
would be perfect because it's such, you know, it's that pyramidal shape where it's wider at the top,
narrower at the bottom. So maybe if I put it inside of my cup, it'll round out the rim nicely.
And so what I'm going to do is I'm going to put a sock, just a, I cut like a piece of
pantyhose off and I kind of wrap it around the cup so that it won't stick to the clay
when I put it in there. There it is there. And now all I have to do is just stick it into the clay
and the sock will help it keep it from sticking. And that's going to round it out. Now as you can
see, my cup has started to kind of expand and come apart right there, which is fine because
it's still wet and damp enough that I can add more clay and make sure that it's nice and tight
and connected. I have a nice connection for it and I can actually push against this cup
so I can work it in there against the cup. Now because we altered the side of the piece,
what that does is we're not going to be on center anymore. We're just going to be a little
off center and it's going to manipulate the rim so that the back part of the rim is probably
closer to the bat than the back part of the back part of the cup. So what I'm going to do
is I want it to be parallel. I want the whole rim to be parallel to the bat and what I'm going to
have to do is go and try to cut. It's going to be a little tougher because like I said the cup is
off center. So I'm going to try to use a like a straight edge and this against the straight edge
and see if we can create a parallel rim, a rim that's parallel to the back.
So let me just mark it there first. Okay as you see that we'll have to cut off this much of the
rim to make it now parallel with the back part of the cup. So let me see if I can do that.
Let me try to round it off a little bit. Like I said the rim is not round and it's not
centered on the bat anymore. So that kind of let's see let's round it. Let's pull that
cup all the way down into it until it rounds off the the rim. I'm going to use my fingers
to kind of round the rim for the lips and then let's go ahead and take the lugs off.
Yep so now that I've got the rim parallel the entire rim is nice and straight and
parallel to the to the foot and I've got the rim is now round. We can go ahead and take this out
and I can even though it's not round I can still sort of I mean it's not centered. Yeah I can
still thank you Jim. I can still work it with my fingers and of course if I feel like I'm
manipulating I can always double check it put that cup back in it to make sure that it's nice and
round again. And we still have a nice rounded bottom. We have the dimple in the bottom. We
didn't have to trim it. We didn't have to let it get leather hard to trim and it's a nice round rim
and now all I have to do is I'm going to put a handle attach a handle from this little tail
to the top of the rim. So here's the handle that I threw and I kind of splayed the end of it down
here and flattened the top of it and it's just a little tiny handle. It'll be like a one finger
kind of handle and this is where it will go. I can't attach it right now because it's too wet
but this is the plan. It's going to go right there. Now here's the side view the profile
of it and this is the way that I'll attach it. I'll have that splayed part sort of wrapped around
the tail part and then the top of it. I kind of like my handles not to be too far above the rim
just because it's easier to load into the dishwasher that way and you don't break it as
easily. But this is sort of the plan is how it'll go and then of course it'll be enough room for
at least one finger if not two fingers after it's fired. So here's some of the samples that I made
earlier. This one was one of the first ones just a little tiny thing but you can see that the the
rim stayed round through the firing process which my porcelain doesn't always do but I was real
happy with it. The bottom I didn't put a dimple on this one I just left it flat. Like I said it
was the kind of the first one and I wasn't sure how to do it but you can see how that's off center
from the rim now which is I think the look that she was wanting to get you know wasn't sure how
to how to do. But anyway there's that one. Now here are some mugs that I made earlier this week.
