Fuel Injection cleaning in less than 5 Minutes/HOW TO clean injection Directly without disassembling

Autos hacks
81 followers
3 Video Views·Jul 4, 2025
Hello it's Alemiak, in today's video we're gonna clean the fuel injectors without taking them out.
Basically, I'm gonna connect the carb cleaner can on a fuel rail and run the engine with it.
It will clean the fuel injectors while the engine is running.
Before doing anything, disconnect the fuel pump fuse so we don't have fuel flow when we start the
engine. Next, disconnect the fuel line. Now we need adapter. It's very easy to make, just find
a hose that fits on your car's fuel rail, glue it to a carb cleaner straw that comes with them,
and that's it. Use a hose clamp to secure it, because the carb cleaner can pressure will push
it out. Now everything is set, spray a few times to create enough pressure to start the engine,
and start the engine. Alright, the engine is running and the fuel line disconnected,
so basically the engine running on carb cleaner. I always like to run the engine till the can can't
provide enough pressure to run the engine smoothly, and it will start shaking and we will stop the
engine. We are almost done, just be careful when you're removing the straw. There's still some
cleaner left, so just don't point it to your face. Wearing eye protection will be important too.
Connect the fuel line back, and also the fuel pump fuse. Let's start the engine, and it will start
right up, and we don't have any check engine light. That was an easy way, the question is,
did it really cleaned it? So I took it out before doing the cleaning, and used the same method of
the engine by powering each fuel injector with a 12 volt battery, and cleaned each fuel injectors
individually. The wire I'm using is a alligator clamp with a push switch, it doesn't matter which
one is a positive or negative. Spray a carb cleaner, and powering the injector by pushing the
switch. Okay, let's zoom in, see what is happening. With the first opening, it's obvious it's not
spraying very well, and after few opening, it will spray better. Here is the first opening,
and the last opening pictures, and that is the difference. So that's it for this video,
hope the video was helpful, if it was, like and subscribe if you haven't already,
and I will see you in the next one. Bye for now.
