Roman takes you along for the nerve-wracking first drive of our stock chassis '59 Ford F100 build featuring a Jon Kaase Boss Nine 572. After months of work, it's time to see how this 60-year-old frame handles the massive power we've thrown at it.
Without the dash cluster installed yet, we're monitoring everything through our makeshift setup - air fuel ratios, oil pressure, coolant temps, and RPM. The Holley EFI system is doing its job, but there's still some fine-tuning needed before this beast is dialed in perfectly.
Watch as we take it for its maiden voyage around the lot, checking all the vitals and getting a feel for how this classic Ford handles with modern muscle. The cutouts are open, the power is there, and despite running a little lean at idle, this thing is showing serious potential.
Still need to get it to our tuner for a proper tune, install the interior, and handle some final details, but this is a major milestone for the build. Can't wait to put 1,000 miles on it over the next month and see how it shakes down.
What do you think - should we keep the cutouts open or button it up? Let us know in the comments!
Make sure to follow us on Instagram, Tiktok, and Facebook to see the behind-the-scenes on our truck builds, chassis projects, and new parts, and subscribe to our channel and hit the little bell icon so you don't miss a video. Thanks for watching.
Check out our site for hundreds of quality and custom products for classic trucks. Ford, Chevy, GMC, and even Dodge. www.fatfender.com
Feel free to shoot us an email if you have any questions at [email protected].
This is Roman with Fat Finner Garage
about to fire up this 59 and get it
outside for the first time
right now. Just syncing up the Holly EFI
system. We don't have the cluster in it
right now, so we're just trying to
monitor everything. Air fuel, RPM, oil
pressure, air temp. We got a our little
makeshift coolant temp sensor wired in
right here just because we're putting a
dash pad on it. So, we don't have the
cluster in it yet. Just want to make
sure everything's up to par and, you
know, be safe. Yeah, let's turn it.
[Music]
Just double checking all the gauges.
Kind of hard with the glare honestly
outside. I might just go up and down the
lot right here. I'm not going to go far.
See what we got. Coolant temp looks
good. Got 165.
Battery voltage 144.
Fuel pressure 45. Not too bad.
[Music]
Oh yeah, it wants to go. It's almost
like nerve-wracking.
[Music]
It's definitely not like running. No,
it's not running. Not running super
clean. It's not bad for sure.
Everything's Everything looks good right
now, though. So, that's a plus for sure.
Just going to wait for the fans to kick
on.
Crazy how much quieter it gets, huh? The
cutouts close. The muffler is definitely
doing its thing. Yeah.
[Music]
Stops really good.
RPM a little high, 1150. Oil pressure is
good, 42.
Air temp not too bad considering it's
mid June in Arizona at 96°, but fuel
pressure is looking solid. Map looks
good. I definitely got to get it fine
tuned for sure. But this is the base
tune. But I'm just happy it's up and
running. It's been running for a couple
weeks, so we had to finish it up and get
some of the drivetrain stuff done. And
just little fine details,
cooling temp 189, ignition timing 29°.
Pretty familiar on how to use all the
Holly software, but as far as tuning
wise, that's not my forte.
watching.
Your inside door handles don't even
work. They ain't on yet, bro. Got to
wait for that dash pad. Oh, it's good.
Uh, at times it's a little lean, but
definitely just kind of idled it out.
Did a data log and then we'll send it
off and see what our tuner says. It's
fun. It's definitely an old truck feel
for sure. Uh, it's cool on the 37s.
Little bouncy, not going to lie, but
like just being up there, it's it's
pretty awesome. Pretty surreal to
actually get it going and moving and
it's fun. It's going to be a nice truck.
Customer will be super happy. I mean,
I'm already happy and he doesn't even
have it yet. So, step in the right
direction for sure.
Fans work, cooling temp's good, all the
lights work, horn works. We'll
definitely go through our checks, double
check, triple check all the fluids and
give it our good full inspection and
make sure it's good to go. But how long
do you think we got on this one? I don't
know. Maybe interior might not touch it
for another couple weeks. As long as
everything looks good, maybe throw some
seat some lap belts in it and maybe get
a license plate and I don't see why we
can't start shaking it down before they
even start the interior. So, we'll put
our thousand miles on it probably over
the next month and it might be a pretty
solid truck by the end of July, not
going to lie. Can't wait.
It's sick, dude. It needs to be tuned
for sure, but what's in it is solid.
Yeah. like like it has some power but
it's still
nasty.
Yeah, those are with the cutouts open
right there.