If you would like to sand this flat, you
can add any type of material you would
like to build a tip overlay up, but
that's not necessary. Rather, this is
how I'm going to do it.
Measure a/2 in down like so. Flip it to
the other side and measure 1 and 1/4 in
down.
Then connect your two dots. And that's
the line we're gonna put our string
groove in. Now that everything's
connected.
Got a chainsaw file here. I've all filed
in about 3/4 the depth of the chainsaw
file, which will equal the depth of a
bow string so that it's flush. But
that's not it for this side. I want to
take out this section. That way when we
draw the bow back, the string has
somewhere to go.
Okay. Now the string can freely move.
Flip it around and repeat on this side.
Okay. Both sides are filed in so it's
functional now. Now we just clean it up
and the rest is looks with this style. I
have two principles. One is no sharp
edges. So little pieces of sandpaper
like this to file the string grooves
will be great. The second principle is
don't cut all the way through the bamboo
on the back. Besides that, feel free to
style it however you like. Now, if
you're going the tip overlay route, the
biggest key is that these surfaces are
flat when you glue it together. So I'll
rub the limb on a belt sander onto the
bamboo and then I'll grab whatever
material I want. Make sure that's flat.
And then just use wood glue to clamp
these down. Once your tip overlay's
block is on, you can shape it just like
the other method. The main difference
though is that you can cut into the tip
overlay quite a bit. So I'll cut into
the back of it the same depth as I did
the side so that the bow string is
inlaid into the limb. The creative
freedom is endless with tip overlays.
See this one here is an old one I did,
but this is a type of horn and I thought
it would look good to make a real
pointy. It's fairly common practice to
have the bottom one more round and the
top one more pointy. And for uh
traditional old self bows, that was so
that you know which ways up and down.
But here, that's obvious because you've
got an arrow rest and you're probably
going to write your poundage and things
like that and sign it with your makers
mark. But on a single piece self like
this with the handle being uniform,
you're like, "Oh boy, does it go this
way? Does it go this way?" Check the tip
overlay. Oh, that's square. That's the
bottom. The top's pointy. Feel free to
take 10 minutes on the tip overlays or
go nuts and just I don't know do
something out of the box. It is less
about the functional functionality and
more about looks, especially with a
bamboo backing. With that said,
technically more mass will slow down the
limbs, but it's very very very small
amount with the amount of tip overlays
we put on. If you were to do a lot
something larger, something wild could
slow down the limbs. But what I'm
getting at is uh don't worry about the
functionality with this bow. As far as
the tip overlays go, make something that
you would enjoy looking at or that fits
your building needs right now. But if
you do something unique like this, every
time you look at it in the future,
you're like, "Yeah, I'm glad I spent the
time on that. That's that's a nice
touch." Hey, here are some tools I
recommend for this. If you like carving
and have a Dremel tool, something like
one of these, here are some bits that
are the most useful. A bit like this can
replace your chainsaw file. A sander
like this can replace your rasp. And a
flap wheel and a burnisher can replace
sandpaper to a degree. And then finally,
this roll of sandpaper is great. This
sandpaper is really cheap. And the nice
thing about it is you can roll it out,
rip it if you're strong.
Goodness gracious, that was harder to
rip than I thought. But here it is. So
you can rip a small piece here. see
small sliver and it rips down
vertically. So now you can grab this and
file or um you know create your own
little inside the grooves. So this
sandpaper is great. So those are the
tools that I recommend if you're doing
it by hand. A fine tooth rasp or file, a
chainsaw file, and some sandpaper and a
sandpaper roll. Here's some different
tip overlays. This one's a bamboo with
clear fiberglass. This one's an Oage
one. This one has Osage and fiberglass,
walnut fiberglass.
That one's a mix of something. This
one's unique and different. And this
one's as plain as you can get cuz the
red from the sealing the end is still
there. This one's a senue wrap because
of the senue on it and it comes to a
fine fine point.
Also, there's more variations up there.
In the end, it's what makes it so fun is
because even if you're making the same
style of bow as somebody else, it is
yours. It's you're building it. It's
customized to you and it it makes it so
cool. And the moment you shoot it for
the first time is a experience that is
one of the highest moments I've
experienced. Especially when it doesn't
break and it shoots great.