How to make a Viking shield! This tutorial shows you how to make this round shield including the shield boss, etching, painting etc. Any feedback is welcome!
Round shield has been quite popular throughout history and Vikings were one group of warriors to use this type of shield. It's one the most iconic pieces of armor carried by Viking warriors. Usually Viking shields were colored red and white, but some other colors were used too. With this tutorial you can learn how to make your own Viking shield and color it anyway you want!
This is a quite easy armoring project even if you haven’t done any armors before. There’s some metalworking included but it’s pretty beginner friendly. Originally Viking shields were made of wooden planks, but I made this from plywood. The shield boss is made from 2 mm steel. It’s all cold worked so you don’t need any real blacksmith tools/skill to make this shield. I made some decorations with etching and golden enamel paint to the shield boss. It’s not a historical Viking shield of course, but still pretty cool.
The shield is 80 cm in diameter, weighs about 5 kg and is made from 1 cm thick plywood. The shield boss is about 20 cm in diameter (historically they were usually about 15 cm) and it's made from two pieces.
How to make a viking shield. In this tutorial I'll show you step by step how to make a shield like this.
Historically viking shields were made of planks, but since I'm using plywood
I'll carve it like this to make it look like it's made of planks.
Since I don't have a forge to raise this from one piece like it was done historically,
I made it from two parts instead.
After you have shaped the piece a bit, bend the edges like this and then you can dish it more.
This area here is a bit hard to shape with the dishing stump, so I used a cup like that for it.
The shape changes a bit while dishing, so you'll need to cut some extra out.
I curved this piece a bit like that so it will fit better with the round shape of the shield bars.
Connect the pieces from one or two points, then you can shape the piece like this
this is that it's quite hard to make the holes match and it's much easier to make later, as I
will show you. You don't need pieces exactly like this, just use something similar to bend the other
Then use vinegar to easily clean the piece.
Now you could leave it like that, but I wanted to emphasize the pattern,
so I painted it with this gold paint.
After this there's a few more steps to go.
I didn't have rivets that were long enough for the handle, so I made a few myself.