Building a fun bike jump out of wood

RockShades
98 followers
#sport #travel #running #marathon #cycling #bicycle #training #race #triathlon #swim #bike #run #adventure #inspire
Last week we built our first in-trail feature, dubbed the Mame Frame.
I purposely positioned it at the slowest point on the trail to keep things interesting, but
that's kind of what made it so hard to ride.
It seems like everything I build is sketchy for the wrong reasons.
So this morning, Kevin and I got to work on a reroute that would make the Mame Frame a
little more fun to ride.
We did our best to restore the old trail, and then make a loop that approaches the Mame
Frame dead on.
We had to go a little ways up the hill.
This solution requires some pedaling to maintain speed on that hill, but also lengthens the
trail a bit.
With a more direct approach, it's way easier to get speed for the Mame Frame, and that
speed can get you into trouble.
So things are back to being sketchy, but for the right reasons.
This reroute has also changed our trail map a bit.
With that out of the way, we're done working on Woodpecker for the time being.
We need to get started on a totally different project right away.
You see, next week Eric Porter is coming to visit, and if you've ever seen his backyard
you can guess what he wants to build.
So this week, we need to build a runway.
It needs to be fast, straight, and smooth enough for a dirt jump bike.
We need to get the flag line just right.
We're starting at the top of Woodpecker, and going downhill straight towards the back
of my garage.
It looks like the trail is headed straight onto the lawn, but that's not entirely true.
I can't really explain it without spoiling the surprise, so let's just get to building.
In case you were wondering, Kevin and I are wearing khaki pants and grey shirts totally
by accident.
There aren't any mirrors out on the trail, so neither of us noticed we were matching
until looking at the footage.
Also by partial accident, we're neighbors again.
That's one of the reasons you see so much of Kevin now.
He only lives 10 minutes away from me, and he's been a huge help.
But Kevin always has been, and still is, a terrible influence.
The only tree along our flag line is this dead pine, and we had planned to cut it down
strategically and carefully.
That's not what happened.
Right here, I was looking up, watching the top of the tree wobble like a noodle.
As I considered the possibility of it breaking off and hitting us, the real hazard came from
below.
The moral of the story is, don't take down trees this way.
It only took Kevin and I a couple of hours to totally clear this short trail, including
most of the stump from that old rotted out tree.
If this were one of my other trails, we'd jump on our bikes and call it a day.
But this trail needs to be smooth, fast rolling, and hard packed.
So I broke down and brought in a machine.
Well technically this is a machine.
It's the same little tiller I had back on Berm Creek.
Although a micro cultivator has very little in common with an excavator, what we're
doing with it here is very much the same.
By churning the soil and digging down to the clay, we end up with a more consistent medium
that can be raked, sculpted, and compacted.
We'll be going over this multiple times, pulling out old roots, breaking down the high
spots, and filling in the low spots, but I think we might also build a little jump at
the beginning.
We're going to build the landing first.
To get dirt for the landing, we're dragging it over from a fallen tree to the right of
the trail.
By mining our dirt from this high spot, we avoid making a hole that will fill with water
and breed mosquitoes.
Our jump will technically be a hip.
A hip jump is a jump that turns a bit, so the landing is often contoured to help the
rider change directions.
Some hips can be huge and a full 90 degrees, but this one will be very small and only have
a slight angle.
As we add dirt, we rake all the roots and plant matter out of it, and then little by
little shape it into a landing.
To pack this dirt down properly, we could use a little rain, and it's supposed to
do that all day tomorrow.
Tomorrow is today, so I'll use this rainy day opportunity to build the lip.
A lip is the same thing as a launch, and this lip will be made from wood.
I'm drawing what I think will be the right radius for this little jump, and then using
a jigsaw to cut the curve.
These pieces of wood will be the sides, and as you can see, one is steeper than the other.
Once we install our slats, the lip should bias left making it the perfect counterpart
to our landing.
The sides of our lip are treated pine, while the riding surface is black locust.
Since all our lumber is rot resistant, we can bury this whole thing in the ground and
adjust the lip however we want.
There is a science to this, but I'm just using my experience as a rider to eyeball
it.
Now, I've been known to misjudge jumps, but this seems right.
Let's see if that really is the case.
Getting the speed for this jump is not effortless, but the trail isn't finished yet.
Once this is all packed down and buffed out, it should be the perfect appetizer for the
big jump at the end.
My friend Jep is in town, and of course I'm putting him to work on the trail.
As I use the tiller on the spots that still contain loamy topsoil, Jep breaks it flat.
Then we go over it again to clip roots sticking out of the ground and detail anything we missed.
Back in high school, Jep and I rode BMX together, and now we both ride mountain bikes.
That's also the case with my friends Scott, Dan, Nick, and pretty much everyone I grew
up riding BMX with.
I can't tell you why they all started riding mountain bikes, but I can tell you that they
all still know how to jump.
With the work Jep and I did, this trail is pretty much ready for next week.
The jump is running great.
The trail after it is smooth, and it all ends right at the bushes, which will hopefully
work out.
Also Kevin's back in town.
When he left, we were just finishing up the landing.
Back tire cleaned it, good!
I feel like that's part of jumping though, you have to jump and go for it, and if the
front catches, know the suspension's there and it's gonna give.
That was almost exactly what happened when I broke my collarbone.
Every time you come over here, you gotta bring your helmet at Seth's house.
Cup of coffee, bring your helmet.
This week we fixed up the approach to the main frame, and dug a new trail that leads
to some bushes.
We also built a small jump which ended up being really fun.
But at the end of the day, most of this work was in preparation for the feature we're
building next week.
So let's leave off with a first person ride through our trail system as it stands.
First woodpecker, and back to the top.
We can't forget the pucker plank off the top of the flight deck.
And finally, a run through our new trail.
Everything looks good for next week, and I guess you'll need to wait until then to
find out why on earth I'd build a trail that ends at hedges.
In the meantime, you can take your best guess.
Thanks for riding with me today, and I'll see you next time.
