Felco tools have been described as the gold standard of pruning and industrial tools. Their cable cutters are exceptionally high quality, but are they worth the price? DirtFarmerJay puts them to the test.
I have a confession to make. I didn’t know that Felco made other products beyond pruners and loppers. In fact, this Swiss company manufactures a range of high-quality tools, including pruning shears, pull-stroke pruning saws, gardening hand tools, grafting and pruning knives, battery-powered tools, and cable cutters.
I became aware of the cable cutters after one of our viewers wrote to ask us to review the Felco cable cutters and share our recommendations. This led to a conversation with Felco, who generously provided us with a C7 and CDO cable cutter.
Felco® makes several cable cutters. Many are for specialized use in manufacturing and industrial settings. The C7 and CDO are very nice tools that will serve well for home, ranch, farm, and maker settings.
These tools commonly create flying debris as the material is severed. This is especially true when a small piece is being cut off. Therefore, wearing eye protection is highly recommended, and gloves are also a good idea.
These cutters come packaged with a specification card that includes instructions on how to service the tool.
The C7 features a triangular cutting action that prevents the item being cut from being squashed. Handy!
Depending on the material being cut and its hardness, this cutter cuts material from 2.5 mm to 7 mm. The harder the material, the smaller the cutting capacity.
These cutters feature red-coated handles, which are wide for my size hands, but as the cutter is engaged, the handles come together and provide the needed leverage.
The C7 is about $60.
The CDO is slightly larger (about 20 cm /7-¾” long) and gives more leverage. While the C7 cuts at the tip/front of the tool, the CDO cuts from the side. The cutting diameter ranges from 0.2 mm to 5 mm.
The tool is black, so it lacks the high visibility of the C7. Even so, I would pay the $80 for the CDO over the C7. They are both great tools, but I like the increased leverage of the CDO. I found that it cut fencing, including barbed wire, quite easily.
One disadvantage of the CDO is that it requires more clearance to access the material being cut, as the cutter is positioned on the side of the tool's nose. The C7 has the cutter at the tip of the tool, so less room is needed.
I also appreciate that these tools are highly serviceable - every part is replaceable. You may not use cable cutters every day, but when they are needed, these tools will reliably do the job. The Swiss are renowned for quality, which is evident in these Swiss-made tools. You can check them out at:
These are lifetime tools that will serve you well. Don’t waste your money on “knock-off” tools that may be less expensive, but can’t do the job as well as the Felco® models can.
JUST DO IT YOURSELF!
Hey, Der Farmer Jay here from derf
farfrj.com. I knew Felco made incredible
loers and hand pruners, but you're
talking about cable cutters. You bet. In
this episode, I'm going to compare their
CDO and C7 cable cutters. Stick
[Music]
around. Hey, Dirt Farmer J from dirt
farmerj.com. Felco makes great tools,
but I was unaware that they made tools
beyond agricultural tools like hand
pruners and loppers. In this episode,
we're going to compare these two great
cable cutters that they offer. Now,
these are great around the home, the
garden, the greenhouse, uh, for cutting
both cables and wire, and we're going to
compare the two of them. Uh, these are
beautiful tools. They're made in
Switzerland. They're not cheap, but
they're lifetime tools. And so the
lifetime value is going to be very high
and the daily cost of ownership quite
low. Well, let's start with the Felco
C7. All right. This back card that looks
like it's just simply a merchandising
card that comes with the packaging of
the C7 is actually a
multilingual language and use card that
tells you all about how this can be
used, its capabilities, and what it'll
do when you're cutting different types
of material like harden wire, softer
wire, cable, aircraft cable, those sort
of things. all of it's there and I'll
put some of the uh top specifications in
the description below comparing it
head-to-head against their CDDO cutter.
But the other thing that's really handy
here with all Felco tools, they're
highly serviceable. So, let's say that
something does get damaged um and you
need to replace something or it's not
working to the level you'd like in
several years from now, you can get
replacement parts. And all of that is
shown right here in the card so that you
can order it right from the company. So
all that information is there. But let's
put it to use here. And one of the
things that you'll see uh in this card
is it points out that whenever you're
cutting something, there's a certain
placement. But the first thing we're
going to do is get the cutter open. And
to do that, there's a little latch in
the back right here. To take that open,
we're just going to roll that back. And
now the cutters will open. And there is
a notch right here in the top that opens
up. That is where all the leverage is
applied in these two hardened jaws. And
a lot of force is put there. Now when
you cut, you do not cut. So I'm going to
take this piece of uh of hardened wire,
high tension wire that we use a lot
around our place. You would not put it
at the tip and to cut it. You put it at
the base. And then when you do that and
cut it, let's see with regular hand
strength. Let's see if I can do it. You
bet. It'll cut right through this
hardened wire, this high tension wire
that's used around the farm and the
ranch quite a bit. But if it's uh less
hardened wire, it's going to cut it like
butter. And all the specifications are
there. Uh so this tool, it feels really
good in the hand. uh moderate spread on
it. So, it's a little bit wide for my
hands, but um I can bring it down and
start to cut. And then lot of leverage
is applied right here. And I can just
tell by looking at it that this is a
really well-made and serviceable tool.
Any tool like this needs to be
lubricated ongoing, coated, oil put in
the right places, and the return spring
and so forth. So, to make it last
forever and to enjoy it ongoing, keep it
maintenanced. All right. This is the CDO
cable cutter. Uh this will cut uh the
overall length is about 7 and 3/4 in or
20 cm. Uh it weighs about just about
6/10 of a pound or 28 kg and it'll cut
about 1/5 of an inch diameter on most
materials or 5 mm. All those
specifications again are down in the
description below. Uh but this is a
really nice cutter as well. Now, this
one's a little bit heavier duty than uh
the other unit I just showed you, but
we're going to go ahead and put in a
part of this tension wire here. I'm
going to put it through, put my hands on
it, and it actually cuts quite a bit, uh
with less resistance than the other unit
does. So, I wouldn't say I've got really
strong hands, uh but they work really
well with this. Now, the other thing I'm
going to cut using this is this came off
a ground staple that's good for using
putting down
um polyexiles or geoteexiles like if
you're putting down for nursery floor or
that sort of thing. And these staples uh
the ones that we got were way too long
for our ground. We had to cut these off.
But let's see how that works. I'm going
to put it in the back. And I can see
that that's already takes significant uh
use to do that. But look it. I was able
to cut it uh and without a lot of work.
Uh the jaws did a beautiful job on that.
So, this cuts a little bit more. It's
easier to stow. Uh as easy as it stow as
the other one, the little swivel and the
two are ready to go. The CDO model is
especially good for working with
fencing. So, whether or not you're
stringing um let's say barb wire, uh
fence panels, that kind of thing, you
can use this to cut. It's really handy
size, high leverage. It works really
well for that. Both of these sets work
really well for cutting netting type
like what you see on all the tables that
we use here in the greenhouse. We can
use these to trim those panels aside
very quickly. Both work beautifully.
Now, what should you expect to pay for
these? Remember, these are worldclass
tools, lifetime tools. You should expect
to pay around $80 for this unit. Uh,
sure you can find cheaper ones out
there. Uh, but for the size of this and
you can put it in your pocket and keep
it going, that'll work just great. Now,
if we look at this unit here, uh, you're
going to pay about $60 out. You can get
them on Amazon. Again, when you see
these kind of tools, it's a form of
flattery, but not a really kind one.
You're going to see a lot of knockoffs
out there. Don't fall for it. Uh, they
aren't genuine tools. They aren't going
to give you the same service. So, you
should expect to pay about 60 for this
one or 80 for this one. Both are great
choices. If it was me, I'd spend the
extra 20 and get this one just because
it's got higher leverage, a little bit
more capacity, but both are great tools.
Check them out down in the listing below
where we give you the full
specifications and you can make the
decision for yourself. Another great
tool that Felco puts out is its standard
F2 pruner, hand pruner. This is the gold
standard of pruners. Check out this
episode where we show you how it works
and where you can get them. Until the
next time, this is Dirt Farmer Jay
getting ready to go cut some wire.
[Music]