Wash Your Bike Like A Pro World Cup Mechanic

RockShades
98 followers
#sport #travel #running #marathon #cycling #bicycle #training #race #triathlon #swim #bike #run #adventure #inspire
I'm here in Val di Sole for the World Cup, but it's been raining, the track is looking
gloomy and bikes are grim and muddy at best, which means they're going to need to be cleaned
a lot.
I thought, what better place to get some pro tips and tricks on how to clean and wash your
bike from a pro mechanic down in there.
I'm joining Dale McMullen, Continental GT Racing's mechanic for Danny Hart.
We've got Danny's bike here just in the stand, which needs a good going over because he's
just finished his final practice run here in Val di Sole before finals, right?
Danny Hart- Finals, yes.
Hank- This thing needs to be working immaculate, it needs to be looking the part, so what would
the first stage be?
Danny Hart- The first stage is get rid of the mud that's attached to it, I suppose.
It might sound silly, but it's important to get rid of the grit so we're not actually
rubbing grit.
Hank- Okay, so like a pre-wash, get the bolt off kind of thing.
Danny Hart- Yes, pre-wash, yes, that would be-
Hank- Well, you seem to be in danger of that, so I'll step back and leave you to it then.
Danny Hart- Yes, yes, and I suppose people might go, oh no, not a power washer, but it's
just as long as- it's a good tool for the job as long as you stay away from the bearings.
No direct contact with the bearings or we can come in from the side, that's okay as
long as you don't go-
Hank- But you're not just going full ham, holding it in on there like that?
Danny Hart- No, no, no, just blowing the grease out.
Hank- Cool.
Okay, mate.
Danny Hart- Okay, yes, I'll go for it.
Hank- I'll let you take her away.
Danny Hart- Yes, so normally I just follow the lines of the bike, so you'll see I'll
just follow the fire.
Yes, it's a quick wash so far.
Hank- Okay.
Initial clean, should we say?
Danny Hart- Yes, usually start from the front, work to the back, or back to the front as
long as you don't just randomly-
Hank- Yes, so you sort of systematically work through it, is it?
Danny Hart- Yes.
Hank- And are you sort of checking for anything in the meantime, or is it just to get the
mud off to begin with?
Danny Hart- No, I'll just look at that closer, closer to you.
to the bike.
Hank- And then you can just, I guess, do a little bit of detail later.
Danny Hart- Okay.
I'll leave you on the other side?
Hank- Yes.
Yes.
I usually do the frame first and then the wheels
because the wheels are usually the dirtiest part of the bike.
And you want to transfer the dirt to the frame,
so I'll do the paintwork first and then move to the wheels.
Usually put a little bit of foam on the brush as well
just to make it extra.
Just to make sure you get every nook and cranny.
Yeah, that's it, and then touch.
Basically touch every part of the bike.
Basically it hasn't been touched, it's not clean.
Cool, okay, I'll let you foam away.
Okay.
So I usually start with all the paintwork
in around the wheels, follow the rim all the way around.
Try and get some spokes.
Okay, with a brush I'll start getting stuck
into the paintwork.
And do you, when the bikes come back down off the hill,
like Danny's bikes come in, do you work,
so will Danny give you any heads up
as though this might be a bit iffy,
this might feel a bit wrong, something like that?
Yeah, yeah, well, for example,
he actually twanged the rear disc there on the last run,
so he basically gave me a heads up on that.
Something he's swapping out.
So yeah, he'll just tell me what's,
although a lot of the time he causes damage
without knowing, so.
I think that's probably just a perk,
well not a perk, maybe like a side effect of downhill,
should we say?
Yeah, and especially here in Faldasol.
It's very rough up there.
It is a wild track, yeah, especially this weekend.
It's looking like it's going to be a wet one.
So I guess, with that in mind,
obviously keeping these bikes running even smoother
is more important?
Yeah, yeah, because the mud here's special.
It's like really gritty, sticky.
Yeah, okay.
So everything's just gritty and grinding,
which will cause a lot of drag through the drivetrain
and stuff and wear and tear.
Well, for a race run now, we've had this chain on
for all race practice and qualities and stuff,
so I'm going to put a fresh chain on.
Just to be safe?
Just to be safe, but there's no damage.
For our viewers at home who aren't going to be
replacing chains every couple of days,
every race, every run, whatever,
what would be the best advice in terms of degreasing,
re-greasing, things like that?
Would you use a degreaser and then just lightly lube it,
wipe off the excess, that kind of thing?
Yeah, personally, you start with a new chain, I suppose.
Who's just cleaned after each ride, really?
Personally, and I try not to use too much of a wet.
Wet lubes go really gloopy and attract the dirt, in my mind,
so I try to go for an intermediate or sort of a drier lube,
which is maybe not easy.
It works okay in the winter,
as long as you're replacing it every single ride.
Right, so as long as you're keeping on top of cleaning
that chain and all.
Is there such a, can it be over-cleaned?
Probably not, it's just how much time have you got, really?
Yeah, okay, that's fair enough.
Okay, well that is thoroughly covered
in old Peaty's Loam Foam there, isn't it?
So we'll let you wash that off now, I guess?
I've touched everything except for the back wheel,
and I'll swap it around and clean it up properly.
And now you'll just rinse that off
with the pressure washer again?
Yeah, I'll rinse it off again, yeah.
Perfect, all right.
Also, if you're wanting to wash your hubs,
we tip with washing your hubs with a power washer.
I would always go past the outside bearing
and hose the opposite side, so you're not anywhere near,
you're nowhere near the bearing, really, I suppose.
Like this.
Yeah, usually when I'm washing the wheels,
I'll go take two spokes at a time, like this,
and get to see things, I suppose.
So you can see if there's any dings, dents,
cracks, anything like that?
Yeah, so it's good time.
It's a good bit of personal time on your bike, really,
isn't it?
Yeah, get up and go.
Just give it a bit of loving.
See what's going on.
Yeah, that's it.
Usually get to see things that you don't normally see,
and there's a lot of damage hidden behind that mud.
Yeah, I bet.
Yes, there's lots of different tools.
So this little brush here is actually good
for scrubbing tires, or getting in and scrubbing pedals.
So that's a firmer, bristled brush for getting?
Yeah, it's great, actually.
I'd use it for scrubbing tires if they need a good scrub.
Luckily, the mud hadn't dried in yet.
Yeah, so this is a really good brush.
I mean, I suppose what we're saying,
another great tip here is,
when you've been riding in the mud,
don't leave your bike for the mud to dry on.
You can tackle it whilst it's still wet mud.
It's way easier.
Yeah, honestly, when you're coming home
from a big ride and stuff,
the last thing you want to do
is go and stand in the backyard in the rain.
But, yeah.
But it'd be beneficial to your bike.
Well, that's it, yeah.
If you can get it dried off, or washed and dried off.
Ah, makes sense.
Before it all dries in,
and oh, it's so hard to shift them once it dries in.
Nothing like dried on cowpat.
Yes.
No, and the other problem is,
next time you go for a ride, you realize,
oh, I haven't washed it from the last time, too.
On the brush itself.
And then you can run the back pedal of the chain
through the brush.
Ah, you beauty.
Get that grip out of that chain,
and then do the opposite side of the chain.
Yeah, so the GT's got quite a few sort of nooks and crannies.
So you've got different brushes
for different applications, should we say?
Not sure what we call this little brush.
It's a long, skinny brush.
The skinny scrubber?
Yeah, skinny scrubber.
So it's good for getting in the little places
where you can't.
Ah, okay, yeah.
Because the bigger brushes obviously
won't get in parts like that, so.
Yeah, yeah.
So this is good for.
Actually sort of investing in.
And it squeezes past the tire,
and the chain stays in place.
So you can really get in those places
which are hard to reach.
Yeah, that's the bits you usually miss.
Yeah, because it's not until it dries a lot of the time
you actually see what you've missed, right?
Well, that's the big mistake.
Just turn the garden hose on your bike.
It doesn't clean your bike.
And you know that once it dries,
it's like, oh, right.
Ah, I've missed half my bike, so.
Yes, pretty much.
Another top tip.
Gone over the entire bike.
Gone in all the nooks and crannies.
Scrubbed the bits that need scrubbing.
Final rinse?
Final rinse, and then I'll dry it off.
Wow.
And it's back to the stand.
Ah, yes, yes.
Crowds are keen for it, too.
So, final rinse, then back to the stand, right?
Back to the stand, and then discover all of it,
so I've missed it.
Ha, ha, ha, ha.
Hi, Dale.
We're all done.
You've been over this sort of top to toe,
here, there, and everywhere.
It's looking absolutely spotless.
So now what are we doing?
Back to the stand?
Yeah, back to the stand, and then, um.
Silicone spray?
Shine protect.
It's called PDs.
That's a shine protect.
It's really good.
Makes it all shiny, and then also.
Stops the mud sticking to it, as well, I guess.
Also stops the mud sticking, so it's got a good coating.
You just use like a microfiber cloth to dry it down?
Yeah, yeah.
That's the PDs up one, too, so.
Hey, all the gizmos.
There's no excess going to splash around the place.
All right, Dale.
We are all done.
We're out of the wash stands now.
The bike is looking absolutely spotless.
Head to toe, very nice.
So we're back to the stand with it, right?
Yep, yep.
That's next.
And then, so what would you do to the bike, then,
just to get it ready for Danny to hammer in finals later on?
Well, first thing, get it on the work stand.
It'll dry it down, next stage, with a microfiber cloth.
Okay.
It'll all dry.
And that's when I start doing the checks.
Check smoke tension, brake pads, and.
Okay.
Hey, little one.
Is it nice and clean?
It is nice and clean, isn't it?
Dry it all down,
and then I'll get the protecting chain on the frame,
but it's maybe even best to take the wheels off
or cover the discs up,
because that's the big thing.
You don't want the sprays.
Okay.
Probably a silicone-based spray.
You do not want that near your brakes.
Would you,
do you just spray on,
or do you sort of spray into a rag first?
I'll spray it sort of gently onto the frame
if the wheels are not on the bike.
Conservatively, should we say?
Yeah, yeah.
Just don't want to go on everywhere, or else.
I'll cover up the brakes with a cloth,
or take the wheels off.
But that's,
you really need to keep the silicone spray
on the protecting chain from discs.
And the same with the chain lube.
Like, the PD's products are all from a bottle,
and not from spray.
Yeah.
I think it's much easier to apply,
well, it's much safer to apply to the chain.
You're not spraying past the chain
on your discs and stuff.
Perfect.
Yeah, quite a lot.
Cool.
All right, mate.
Well, look, Danny's race run is fast approaching,
so I shall leave you to it,
but thank you for giving us the full run-through
of what you would do to his bike to get it race-ready.
Hopefully it's helped you lot out there,
but from us, for now, we'll see you later.
