Massive Cryochamber Build With A Weird Gas Alien #diorama #scalemodel #fantasy #resinart

Scale Model Geek
93 followers
In this video I create a cryochamber in Blender and then 3D print it to build a massive 310mm / 12.2" in height vignette.
-------------------------------------------
INSTAGRAM: @scalemodel_geek
SHOP: www.scalemodelgeek.com.au
ETSY SHOP: https://www.etsy.com/au/shop/ScaleModelGeek
3D MODEL FILES: https://www.cgtrader.com/designers/scalemodelgeek
-------------------------------------------
#modelkit #modellers #scalemodel #scalemodelkit #scalemodeling #scalemodels #plasticmodels #diorama #3dprinting #3dprint #resinart #scifi #apocalypse #fantasy
I'm the Scale Model Geek and in this video I'm really keen and excited to show you what I've
been working on. Now I've created something totally from scratch starting with this tube.
This is a 100 millimeter clear tube to be used for my project and what I've created
is this awesome looking cryo chamber which I designed in Blender. Took me a long time to
actually create this, a few errors here and there but ended up with this awesome looking thing.
Also if you really like what I'm about to show you the creation I make you actually get to
download these files from CGTrader and I'll leave the links in the description for you.
Because I'm really still a bit of a newbie in using a 3D Blender it did take me quite a while
to create this because yeah for me it was a lot of trial and error. Took me about a week to design
this but the end result I must admit I'm really really happy with. Now this project is a huge
project there's not many parts but they are big parts and a couple computers in there as well
and I've also designed it so you can take this air rock and this is what they use at the bottom of
fish tanks. So if you wish you can seal it all up with some silicon and create some bubbling effects
coming straight out of it. I thought that would be a really cool idea. If you don't want it you
can put some LED lights in there. Talking about LED lights this is the top section and it's designed
to take 12 volt LED strips. Just some greeblies on the side as well just to add a bit of interest.
This is a creature that I created and modified heaps of it in Blender and this will be floating
in the inside of the tank which will also be available in the files. I'll have these crazy
little wires hanging out of it as well. This figure is originally from a company called Loot
and it's exquisitely detailed it's absolutely wonderful little figure. That won't be available
you'll have to join up Loot if you want this biotechnician. Like I said earlier it took me a bit
of trial and error to get the cryo chamber to the way I wanted. This was the original base. Now
originally I had these greeblies part of the base and they're separating them and you can see those
side pipey things they ended up being redesigned to make them look a little bit better and fit a
printer. I also decided I might separate the three main pieces by using these plastic card sheets
and they're 1.5 mm with a hole cut in the side so you can put the cabling through it.
Of course everything has to go together with super glue. Now part of my construction I decided to
glue the base and the spine of the cryo chamber together just to make painting a lot easier
rather than having separate pieces then trying to paint them. These are the piping and you can
mix them up whatever you want you can have the smaller pieces at the front or vice versa
and for the piping some of these 7.1 mm tubing from Evergreen who've been around for a billion
years and those are cut at about 120 mm in length. This is another one of those projects that
I've been wanting to do for quite a while now and I'll tell you learning how to use blender has opened
up so many options for me. I still get to play with greeblies but it's just in the virtual world
and talking about greeblies I also decided to add a few on the side of these top section there.
Of course with the files you can resize to whatever size you like. I didn't want to glue
the top section to the rest of the cryo chamber so I ended up drilling a hole and adding a quarter
inch nut to the top section and the bolt that connects to it and once the two-part epoxy glue
had hardened I unscrewed the bolt and this just gave me the option of removing the creature or
topping up the water if I need to. Off camera I painted this black and the reasoning for that is
because I want to paint the creatures in really bright colorful colors. I really wanted to stand
out because the focus is the creature not the cryo chamber and a bit of gun metal to actually
dry brush the whole thing. Dry brushing it with the gun metal really brings out all the detail
it looks amazing. I'm a real sucker for metallic finishes just can't get enough of it. During the
conceptual process I did toy with the idea of painting it like a clinical white or even a gray
color but as you can see I ended up with metallic and I love it really happy with the finish of it
feels quite industrial which is what I was kind of thinking about
and some of this light metal I'm going to hit this with just random areas around the cryo chamber
and I'm doing this just to add a bit of visual interest to the whole unit. With all the dry
brushing done it's time to add some lighting. For the recessed area in the top section I'm using
some of these 12 volt led strips. Now this stuff you've got to be careful where you buy from because
they vary so much in price. I bought this off AliExpress and I'll leave the links in the
description and they're really really dirt cheap and these things are really simple to use.
Both terminals are clearly marked negative and positive and be very careful you can only
cut these at certain lengths but again those little lengths are clearly marked as well.
Look at that works first go how can you go wrong there's only two wires. The led strips do have a
sticky back but I decided to add just a couple drops of super glue just to get it started
hold it in place as I went around the circle. Now I'm constantly testing the led lights just to
make sure I haven't damaged them in one way and to add a bit more strengthen up just using some
of this aluminium foil and cutting it to shape and then pushing it in to mold it and this gave me
some extra strength through the reflection. A bit of hot glue to keep it into place again another
test and check out how bright it is look at this oh looks awesome and now on to the air stone.
Once again I will leave the links in the description where you can get this
that particular stone is 60 millimeters and a bit of clear silicon to hold everything into place
and also lots and lots of silicon in the back of it to make sure it doesn't leak
and I really flooded that section. I then put that aside because it needed 24 hours to dry
so while that was drying it was on to the creature. Now I'm going to call this dude
Harold because I kind of think it looks like a Harold. The base coat some of this alien purple
and you can see I've done the zenithal lighting on there originally painted it black and then
sprayed from one direction with some white. Now an even coat with that purple I then added a bit
of this chrome yellow to the color and started hitting the highlights and also his belly
and at every stage I just added a bit more white to my little airbrush pot
and just to lighten it up and I slowly built up his tones look at that he's got some really nice
contours. Now I wanted to pop out some more of Harold's details so I end up using some of this
light sand from Ammo to dry brush his skin and this was an extremely light coat. The dry brushing
was just heavy enough to see the detail without losing the tones of the purples. Now for the
inside of his mouth and his tongue some of his burnt red for all the bony areas including his
teeth some of this beige red from Vallejo. Harold's got quite a number of teeth and a few spikes so
it took a few minutes to do. Now once that was dry I used some of this light sand and glaze medium
now the reason I'm using that dry brushing light sand is because I didn't have that color in in
another paint so I thinned it down quite a fair bit with the glaze medium and just gave it a
slight wash from the top of the spikes. I decided to use this electric blue just to add a bit more
detail and color to his face. Is it a face? What do you call it? Yeah it's his face he's got a nose
got eyes got a mouth must be a face if it's not let me know in the comments. I'm using this
violet red for the big bony bits on the back of his head and his back and of course there's a
whole bunch of bony spikes on it as well. These are the body sensors which I painted flat black
and dry brushed them with the light silver. Off camera I did drill some holes into those sensors
and check out Harold he's looking fantastic really happy with the way he came up love the colors of
him he's ready to go out on the town tonight. Now as a last minute idea I created this ring
and that's purely there to hide the joint between the clear cylinder and the cryo chamber.
I created this twisted wire to use as the cables that go to the body sensors
and all this was was one length of wire I folded in half stuck one in on a hook that was attached
to a beam and the other end into my cordless drill and spun around and it twisted into this
really cool looking cabling. Off camera I did drill some holes into Harold he wasn't too happy
about it but hey he didn't have a say. Even though I used a bit of super glue on the joints
it did need a bit of extra strength so I ended up using some baking soda in this little dispenser
bottle and you just squirt that onto the super glue and it goes really hard.
This bit that was a bit annoying because that was a bit fiddly
just to align all the cables into place the sensors in the light section
we've also painted black and then dry brushed in silver. A quick test fit of Harold inside the tube
just to make sure he sits nicely and straight and none of the cabling is actually hitting the tubing.
Then using this araldite five minute epoxy adhesive I stuck that onto the ends of the
cabling. Once that was all dry I then used a Dremel tool with a cutting wheel and just
chopped them off and then to finish off the cabling bit of black base coat and that's silver.
Here I have some masking tape just to make sure I don't get any silicone sealant
onto the actual cryo chamber because that's really a bit of a pain to
wipe off it leaves a bit of a glossy finish to it and a bit of force to make sure it all spreads
nice and evenly. I left that to dry overnight and the next day I gave it a water test. Great news
it didn't leak, bad news I hated it. Because I used a tube it created refraction which distorted
Harold and Harold looked horrible. I had to figure out a plan B. So while I was thinking about that
I decided to add a bit more detail to the top and bottom sections of the cryo chamber.
In fact this was very therapeutic for me to work out my issue. I eventually came up with this
awesome idea since I can't have bubbles I'm going to have smoke. I cut out a circle from this clear
sheet of plastic I then added a bit of PVA glue to the top and hit it with some cotton wool.
Once that was dry I then teased it out to get that real wispy look to it and I've got to say
I'm pretty happy with the turnout have a look at this that's looking awesome. For plan B it's not
too bad at all and once I glued it into the base with some more PVA glue I didn't tease it out even
more. Pushed through the wiring of the 12 volt LED lights. I then used this quarter inch bolt
to hold it all together. Now for the backing I really didn't design anything in 3D because
these are really really thin and I thought I was going to have some issues with printing it.
So I just used some plastic card that's an eight millimeter hole for the jack the 12 volt jack that
is. I then proceeded to cut out a hole in the mid section of it the spine that's a 10 millimeter
width between the edge and the center section there and to cut that out I just give it a couple
scribes the first one being very light and the other two or three scribes a little bit heavier.
Once I scribed all four sides this stuff is so easy to use that you can just bend it
and it snaps out. Plastic card is so cool to use. Now to add the details within that center section
some of this are sidewalk and all this is is just a sheet of styrofoam with little squares in it
but it's a great looking detail. I then hit up my Greeblies box of bits and pieces
and start detailing up the power section of the cryo chamber. I have no idea what this piece was
but it fitted perfectly on the top section didn't even have to cut it down. Now these are missile
launcher thingies of jets you know the bits that hold the missiles underneath the wings
and a couple of tank wheels I think they were.
I think these pieces were the inside of a bomb bay or something
something like that but they look really cool and there they are all done under coat of
flat black and then dry brush with gunmetal. Off camera I soldered the two wires to the power jack
and once I screwed that into place I did give it a coat of flat black just to hide as much as I could.
Some super glue to the base and I wasn't planning on pulling this apart again so I put a fair bit
of mount on there just to make it quite strong so when I pull the jack in and out it's not going to
rip the whole facade out and this one only got a couple drops of super glue I just had a feeling
I might need to access that section a bit later on and there's that black coat I was talking about
that hid it pretty well. Now I did end up updating these computers and change the keyboard to some of
these like glowy ball dials because the creature that's using them isn't really human so keyboard
is really a dumb idea. Now to start off on those buttons I gave them a first coat of some of this
Once that first coat had dried completely I gave some of those knobs a coat of this clear yellow
and that gave it that really anodized look to it and then I hit them up with various other colors
including this clear green the orange some blue and of course we need some red as well
there's the final keyboard almost we need something on that screen so I designed these
little screen images in Photoshop and I just grabbed the 3D images from Blender
turned them into a wireframe and just printed them out in green I gave the screen a nice coat
of PVA glue then slid the images straight onto there then I used a cotton bud just to make sure
it's stuck on properly. Now for the final look I'm using some of this clear UV resin and a nice
thin coat over it once I got that nice and even I then hit it with a UV torch for about a minute
and finally super glued the computer terminals onto the cryo chamber and with the cryo chamber
pretty much done it was on to the base this is a piece of XPS foam covered in general filler
or putty and then painted gray with black sides now I figured PVA glue should be more than enough
to keep the cryo chamber stuck to the base with that all done it was on to the final figure
the bio engineer from Loot the base color of his skin will be some of this goblin green
and I'm going to paint a very thin coat because you can see I've painted the figure in some
zenithal highlighting now I'm doing a thin coat because I don't want to lose that shading
and I really like the color it's a very cool color now on to this electric blue for some of the
colors in his garment and it's really just the front section oh actually there's a bit going down
the back of him as well the red for some more of his garment mainly the base area again a thin coat
so I don't lose any of that highlighting black for the final bits of the inserts of his garment
the bio engineer's starting to take some shape he's looking good now some of this gold from
model master now this tin of gold is like 25 years old I've had it a very long time
but it works really well there's no problems with it and now on to detailing his skin
now I'm starting off with some of this goblin green again mixing it with some flat yellow
and some of this off-white and some glaze medium as well I'm mixing all that together
to create my highlights and I'm just running down the raised areas of his skin
and this is really adding a bit of depth to his look he's almost done just a couple little bits
and pieces to do now some of this alien purple the bio engineer has these blister looking things
on his arms so I thought I'll add the purple to that I'm using some of this dark flesh tone
with some medium glaze and I've created a wash to go over the gold to bring out some more of the
detail some of this panel line accent color it's the black from Tamiya and I'm hitting the recessed
areas of the gold plating then talking about Tamiya some of this gold leaf the old x12
and a very light dry brush over his plates I was really happy with the way the gold turned out on
this and this is what he looks like all done he's ready to go on to my little diorama well I guess
if it's a little diorama it's a vignette so it's just a matter of working out where to place him
yep I decided to put him there and I also stuck him down with some PVA glue
now looking at it it kind of felt it needed something else it was missing something
so I decided to create some barriers some hand rails as it were so I grabbed this closed wire
hanger and the gauge of this was perfect for what I needed and I cut up four even lengths of around
120mm each one I then chopped them down with this wire cutter and with some pliers bent them
into shape of course I need to do this four times I think that gap is about 10mm if I remember
rightly and look at that I'm painting it flat black I'll give you one guess what the next color
is going to be of course it's gunmetal because everything's black and gunmetal in this and then
I glued him down with some PVA glue and the thing is this thing was so big that you haven't had a
chance to see the whole thing in one hit so thanks for watching and let's check out the final video
