The Ultimate Bargain Antique!

Thomas Johnson Antique Furniture Restoration
41 followers
172 Video Views·May 3, 2025
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine prepares for his Saturday, May 3rd 2025 yard sale and restores this handsome antique mahogany mirror that was itself an incredible bargain. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, or write us at [email protected]. And for those on the east coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique
Furniture Restoration in Gorm, Maine. If
you're one of the first viewers of this
video, I thank you and I invite you
over. Tomorrow, Saturday, May 3rd, we're
having a big uh garage sale, a shop
sale. I'm getting rid of a lot of excess
tools, uh, clamps, and all kinds of
other things associated with furniture
restoration.
Excess hand
tools, excess clamps, and yes, you can
have too many
clamps, miscellaneous
tools, other
products, a lot of
stains, some
finishes, oil colors, glazes, and other
types of colorants.
Lots of furniture hardware, you know,
poles, knobs,
casters. Uh I have a big box of old
spindles. It's too much stuff to
mention. Everybody likes a bargain. And
in this upcoming video, you'll see where
we found an old OG mirror at the thrift
store for four bucks. Uh, it's a period
antique from about 1840. And I like the
video because it shows some, you know,
difficult veneer repairs, but it all
comes together. And I was able to stain
the new wood, polish it up without
refinishing, which is what I really
like. So, enjoy the video. Subscribe,
like, share. I'd appreciate it. And
maybe I'll see you tomorrow. And no
early birds. Got that, Buffy?
This is a really nice uh mirror and
mirror frame. It's a American Empire,
which would be from 1820 to 1840,
somewhere in there. Uh it's often called
a OG mirror because of the shape of this
uh molding here. It seems to have the
original glass in it, and it's in really
good condition. This was a thrift store
find. $4 here in Maine. And uh it's got
some obvious problems. A little bit of
buckling along here. Missing veneer in
four places. Uh this corner appears to
be loose. I got to see if I can bring
that back
together. And has some buckling veneer
here. And it's also got an interesting
little note on the back. Mahogany mirror
30 1/2 by 21 12 OG. Purchased from Mrs.
Thompson, neighbor in Oak Park, who
brought it from her old home in Troy,
Vermont. Approximate value
$15. So, I want to see if I can take the
this the the inner frame, the molded
molded part of the frame out of this
outer
frame.
Actually, the first thing I want to do
is maybe secure this little bit of uh
writing that's on the back here. This
note. Secure it a little bit better.
[Music]
All right, I can set that outer frame
aside, do the repairs on it. Um, I've
got to glue this frame together. But,
uh, first thing is take the glass out.
I'm not sure where
these corner blocks went.
Maybe maybe they were holding the glass
in. I think they
were. You can see there's a nail in
there.
Maybe I can work out work it out enough
so I can grab
it. I'd say that was original
equipment. I took this nail out so I
could get this this two pieces evened
up. It seemed to be holding me back, but
when I'm done, I'll put it back.
There's still a gap here in the middle,
but it it's come together in the two
corners. So, that's all you can do. I'll
have to fill that
in. All right, I've let this uh dry
overnight.
Now, this uh this part of the frame is
in pretty good shape, but it has some
bubbling and uh lifting of the veneer
just in this area here. But, of course,
this is
curved. So, I'm going to use some uh
bending plywood for this curve. But, I
still think I need to make a block. uh
in the shape of this big
molding. I think I have a piece of wood
here big enough. Uh some of you may
recognize this as the cut off from my uh
extending the bed rails of a antique
sleigh bed
video.
[Music]
[Music]
[Applause]
[Music]
Heat. Heat.
[Music]
I need to take
off more in this curved area. I got to
get a better fit.
[Laughter]
The wacky wood turned out to be too
thick to make the curve. So instead, I'm
going to use a 16thin piece of mahogany.
Now we can get back to the outer frame.
These will be a lot uh more
straightforward.
Yeah, there's a separation here in this
corner. I should have glued that uh
first, but I'll do it now.
Okay, everything's dried overnight. I'm
uh really anxious to see what this one
looks
like. The sole piece came off. I'll have
to reglue that.
This was a piece I didn't glue
yesterday, but it popped off. This area
seems good. I won't really know till I
get that glue off. I think I'll take
this glue off with a damp rag. And then
I'll glue this piece. You have to be
patient getting a glue off, but it does
uh just continually rubbing with the
damp rag and it it all came off. This is
down really well. It's not uh perfectly
flat, but that's okay. We'll just polish
it up. There's a little lump right
there. It's not moving. Feels hard.
Maybe I'll heat that up and glue it
down. I've got to glue this piece
anyway. All right. Now, the outer frame.
Okay, the the patches look good. Uh, now
I've got to trim them off and sand them.
[Music]
Now, you'll notice I'm sanding cross
grain here, and that's okay to do on uh
things like frames like this, as long as
you sand up really well up to
220. That will eliminate all the
scratches. Yeah. And this is typical of
job like this. Uh sanded this area.
There was a crack in the veneer here
that I thought wasn't big enough to put
a piece of wood in. I was going to putty
it. And when I went to do that, sure
enough, there's loose veneer all around
that
[Music]
All right, I think I've I've got all the
my repair area sanded and now I'm going
to take a fresh piece of 220 and just
sand uh lightly over the entire
frame. All right. Now, I'm going to uh
just pat it off with a little bit of uh
alcohol just to clean it off and to see
what my colors like.
Okay, I've got some walnut dye stain
here and I'm going to stain my new
pieces of wood.
All
right. Now, I'm going to pad the whole
frame uh with the same stain. There's a
lot of old wood that I sanded that's a
little bit lighter. I'm going to see if
that brings it in. I may have to brush
on a little more.
Okay, I'm going to let this dry. Uh,
then I'm going to give it a coat of
shellac. And in the meantime, I'll get
back to the inner
frame. That went down
great. Now, this inner frame uh doesn't
need to be sanded or anything. I'm going
to take a damp cloth, get my uh any glue
that's on here off. Uh, then I'm going
to pat it with a little alcohol just to
clean it. And then I'll pat it with some
French
polish. I almost forgot. Uh, this corner
that I glued up, I've got to fill with
uh wax. And u I figure the wax is the
best thing to do. It's easily uh removed
if it needs to. And if this
uh decides to move in the future, I
think that's the best
bet. I'm going to spray this with the
aerosol shellac cuz I want to uh build
up some finish on the new wood and the
raw areas.
[Music]
I've let this dry for a few hours now.
I'm going to sand just the areas with
the new wood and the surrounding areas
where I sanded the most to the bare
wood. I'm going to use 320 and then I'll
spray another coat of shelllock on those
areas.
All right, I've let this dry overnight.
Uh I'm going to go over it now with a
gray uh Scotch-Brite pad. And then I'm
going to use some brown mahogany aerosol
toner on some of my repair areas. Just a
little bit.
Now, I can immediately see that my uh
the brown mahogany was too red for this
frame. I'm going to switch to extra dark
walnut. I just want to darken it a
little bit. I definitely don't want it
any redder.
Now I'm going to go over these areas
without tape with a little bit of uh
just a little bit of medium brown
walnut. It won't change the color that
much hardly at all, but it will sort of
blend in my repair areas.
Okay. I'll um I'm going to let that dry
for a couple
hours. All right. There's a few uh
little uh edges and stuff where I sanded
through a little bit. Uh I'm going to
hit with a marker. All right. Now, uh
I'm going to hit this frame once again
with a coat of aerosol shellac.
Now, I'm going to use a uh I'm going to
do a little French polishing on this
frame. Uh I'm going to use a product
called Lac French. So, I guess it's a
it's a padding lacquer that I like using
Okay, now I'm going to install this in
the uh outer frame and do a little more
polishing.
So, here it is. This is a nice mirror.
Uh, real period antique, American
Empire, say about 1830 and, uh, four
bucks at Goodwill, plus about 6 hours of
labor. But it looks pretty good.
