Conserving A Clown Costume

Threads Through Time
2 followers
3 Video Views·May 3, 2025
Follow Senior Textile Conservator Susana Fajardo as she works on a sequinned clown costume worn by 20th-century clown Jackie Sloan.
Sound designer and performance-maker Julie Rose Bower has documented Susana's steps using ambisonic sound, letting us get closer to the object than ever before.
See the painstakingly delicate processes involved as dust is carefully removed, corrosion is reduced, and sequins are gently cleaned.
Timestamps:
Museum vacuum and soft brush removing dust: 00:36
Abrasive rubber reducing corrosion on metal hook: 02:20
Sequin cleaning with swabs: 04:02
This is the white clown costume.
It had been in store, part of a collection of a circus collector and ex-clown, I believe.
First of all, I will surface clean it.
I will use a soft brush and the nozzle of my low-powered vacuum, Museum Vac, which is this machine here.
And I will gently try to pick up dust all over it.
But I'm not going to actually touch my object.
I'm going to brush the surface dust onto the nozzle as I move along the area.
So I'm going to test the power.
Basically, the coloration of the sequence, there is nothing I can do about it.
The cellulose nitrate sequences were painted, and during wear and with abrasion and over time, they have lost their color.
We're going to look at the area under the arm, where there is a lot of sweat, staining of the abrasion between the arm and the body.
This eye is very corroded, so I'm going to try to clean that a little bit.
So I'm going to start with the soft rubber first.
So I am removing some of the corrosion.
You see the difference between the two sides.
It's a more abrasive rubber, which is used to remove corrosion products from metals.
But it has to be used very gently and in stages, building up the clearing of the products very, very slowly.
And this purple sequence have a kind of spotty deposits.
I'm going to try with a very lightly damp swab.
I'm going to try to see if I can lift it up a little bit, clean them a little bit.
Yeah, that's quite nice.
You see the difference where my swab has been to the edge of the sequence, where I haven't been.
I can rotate my sequence away from the thread, and I can do the area where the dirt has been trapped.
Yeah, so that's quite good.
So I want them all to look like that.
Okay, so I'm going to have a look at this.
This is the cotton of the sequence, which is being stained with the mould.
And I'm going to see if I can lessen.
Oh yes, it is.
Oh no, it's actually coming off.
That's really good.
It's best not to be too optimistic sometimes with the outcome of treatment.
So you're pleasantly surprised.
So that's nearly all gone, which is very satisfying.
