10 Tools & Consumables That Every Filmmaker Needs

Filmmaking Techniques
4 followers
To capture images, filmmakers not only need a bunch of camera grips and lighting gear,
but also all the bits and bobs that assemble and hold everything together.
That's why today I'm going to go over 10 commonly used tools and consumables
which are present on almost every professional film set.
This video is sponsored by Squarespace, the one-stop shop for setting up your website.
Quickly, before we get going, we need to understand the difference between
tools and consumables and who usually brings them to set.
Very simply, tools can be used over an extended period of time to assist in assembling gear
or to aid the filmmaking process.
Consumables serve much the same purpose, but as their name suggests, they are perishable
and need to be restocked or replaced over time as they are used up.
On an industry film set, technicians will usually own and carry a kit with their own
tools in a unit bag which helps make their lives easier.
For example, a first AC may carry items like allen keys, wrenches, magic arms, spigots,
cine locks and screwdrivers which they will use to assemble and build the camera.
On long-form jobs like movies or series, consumables are usually requested by technicians
and purchased by production.
Whereas on short-form shoots like music videos or commercials, typically these items will
be supplied by a technician who purchases these items themselves and rents it out to
the production at a daily rate.
For example, a second AC will bring along a unit bag complete with items such as different
shades of gaffer tape, dust off or velcro cable ties.
Gaffer tape quite literally holds shoots together.
This adhesive tape comes in a few variations, the most common all-purpose being the wider
2-inch black or sometimes white gaffer tape.
This high-tensile matte tape sticks to almost any surface without moisture and can be used
for a number of varying applications by the camera, grips and lighting department.
Whether that's sealing a weather bag on a camera, taping down a power cable, performing
a quick fix on technical equipment or covering a stand to stop it reflecting light.
Then there is the narrower 1-inch gaffer tape which comes in a variety of colours.
This is usually used by the second AC in the camera department to mark media or film magazines
with a roll number, to apply to a slate where permanent text can be written such as the
production company or title of the movie, to give actors an eyeline mark to indicate
where they need to look, to create tracking marks that can be used for visual effects
or to mark the position an actor needs to stand in.
When marking actors on a long form job a different colour is used for each character
so that actors can easily identify their colour and where they need to stand.
The first lead is usually given a red mark, the second lead a blue mark and so it goes.
Likewise red gaffer tape is usually used on the A camera and blue tape used for the B camera.
Other types of tape also exist such as paper tape which is thinner,
lighter and may leave less of an adhesive mark on surfaces.
Black paper tape is used by camera assistants to flag or block light from hitting and flaring a
It's used because this tape has a black colour on both sides,
unlike gaffer tape which has a white adhesive side which may undesirably reflect more light.
One of the most used tools in an AC's kit is a t-bar.
This is a flat screwdriver head which is attached to a t-shaped grip.
It's usually used by the camera department for any assembling or disassembling of equipment parts,
for example screwing a base plate into the bottom sliding plate of a camera.
This base plate can then get attached to a tripod head.
The reason this t-shaped grip is normally favoured instead of a normal screwdriver
is that it allows AC's to turn screws with more torque and have more leverage to really tighten
screws or untighten difficult to turn screws. The security of this connection is especially
important for certain rigs such as on an arm car where lots of violent vibrations
may loosen the connection over time if the screws aren't secured tightly.
Most grips, sparks or AC's will carry around some form of multi-tool on their gear belt.
The advantage of a multi-tool is that it's easy to access and fast and on a film set,
saving time with technical fixes is the name of the game.
There are many things that these tools can be used for, from having a quickly accessible star
and a flat screwdriver for adjusting screws on the camera, to using the knife for cutting
lighting gels or using the pliers to loosen a stubborn overly tightened piece of gear.
Bongo ties are part fashion accessory for camera assistants to wear around their wrists
and part consumable. These all-purpose ties are made of rubber which can wrap around something
with a bamboo button end that the rubber latches onto. This makes it easy to tie and release things
such as binding cables together for better management, wrapping a waterproof cover around
a matte box or tethering a video cable to a dolly. These ties usually last quite a while until the
eventually snaps or until, more often than not, they end up in someone else's kit at the end of
the day. Whether you want to work as a filmmaker or set up your own business selling consumables
to filmmakers, you will need a website. One of the best ways to create and manage one is at
Squarespace, today's sponsor. Squarespace makes setting up your website simple and intuitive with
their new guided system Squarespace Blueprint. All you need to do is select from their custom
curated layouts and styling options to build an online presence custom tailored to your style
and needs. Then integrate and connect your social accounts seamlessly to promote your brand and use
their optimized SEO tools to get eyes onto your work. So head over to Squarespace to get started
with their free trial and then when you're ready to launch your site go to squarespace.com
slash indepthcine to save 10% off your first purchase of a website or domain.
Cleaning filters or lenses is an important procedure which needs to be done with special
care since this glass is very pricey and can't afford to be scratched. The first step in this
process before you apply any lens cleaner or wipe it is to blow pressurized air at the lens
to remove any specks of dust or dirt which may cause scratches if wiped with a cloth.
Dust off is also used by the camera department for cleaning little sand particles which get lodged in
difficult to reach crevices on the camera. This dust collects when shooting in an exterior location
such as a farm or a beach. Pressurized air can also be used to spray off water droplets that
collect on the filter or lens when shooting in the rain. Dust off comes in a can. A burst of
pressurized air is released by pushing down on a nozzle. They come in two varieties one with a fixed
valve and another which is usually more popular in the film industry has a removable nozzle which
can be reused with multiple cans of compressed air. Once the lens or filter is clear of dust
particles the next step is to wipe away any smudges. To do this filmmakers use a lens fluid
and a lens cloth. The most common lens fluid is called pankro which is basically a rubbing alcohol
which you can spray on to remove smudges grease or dirt from glass. Once this is applied you then
need to clean it with a lens cloth. This could be something like a selvette or a microfiber cloth
which can be washed and reused after cleaning. Some also like to use lens tissue or cleaning paper
which is a consumable that can only be used once. Along with the t-bar another common tool used by
the camera department for building and breaking down cameras are allen keys. Many camera cages
and components have hexagonal screws and mounting points that need to be locked or unlocked with
allen keys. For example when de-rigging the cage on an alexa mini and attaching a top and bottom
sliding plate for a gimbal. Camera assistants will carry around a full set of these tools in
case they run into any odd size screw. However the two most common and standardized thread sizes
for camera components are either 3 16th or 5 over 32 inch variations. Many assistants like to carry
t-handle versions of these two sizes as they are quicker and easier to work with and offer more
torque to release tightly secured screws. To make camera builds nice and compact assistants will try
to attach the accessories as close to the body as possible which may mean trying to get rid of too
many bulky magic arms. A solution to sticking smaller objects such as a tiny timecode sync
tentacle directly to the camera's cage or body is to use dual lock. This has one sticky
side which can strongly bind to a surface such as a camera cage or a tentacle and another side
with a sort of grooved interlocking velcro. When these two interlocking sides are pushed together
they provide durable and reliable fastening while also being able to release or connect together
multiple times. If gaffer tape is the most used consumable on set probably the second most used
one at least by the lighting department are croc clips. Croc or crocodile clips are metallic pegs
which are primarily designed to attach lighting gels to barn doors without melting or slipping
even when exposed to the high temperatures created by these large lights. Most sparks will
also carry around a few of these croc clips on their person for any minor rigging tweaks to gels
or textiles like clamping a wrapped duvetyne around a stand or clipping diffusion gel onto
a window frame. The camera department may also carry some of these useful clips and use them
for any clamping that needs to be done such as clipping a black and white protective cover over
the camera when it's not being used. Although some shoots may take place indoors entirely under the
safety of a roof, for other shoots that involve shooting outdoors it's good practice to have some
kind of rain bag at the ready just in case the heavens decide to open up. This could take the
form of a reusable backpack cover which can be clipped over the camera to protect it while
shooting in a very light drizzle or if there's more heavy rain a plastic rain bag will be used
to protect the camera. This translucent plastic bag is a consumable which will be placed over the
camera with the opening facing the ground. The team will then tightly secure the bag around the
matbox, usually with one of those bongo ties that we mentioned and then cut a hole so that the lens
opening side of the matbox is exposed to the elements. This will keep the camera nice and dry
and the electronics safe from harm. Hope you got something out of this video. As always thanks to
all of you for supporting the channel and to those that get the videos early on Patreon.
Otherwise until next time thanks for watching and goodbye.
