IMPOSSIBLE RESTORATION challenge ft. Flipping Drawers. Unbelievable furniture restoration.

Antique Art Deco
12 followers
3 Video Views·Aug 26, 2026
In this video I challenge Jay from @Flippingdrawers to work his magic on the worst piece of furniture i could find for him. Jay returns the favour and finds me this extremely challenging piece. We had a great time doing this and hope you enjoy the challenge too. Go and see Jays video to see his amazing work.
AI Generated·May contain errors
Video Summary
AI GeneratedA furniture enthusiast transforms a purple-painted mid-century modern cabinet into a polished walnut piece. The process involves chemical stripping, structural repairs to veneer and joints, and a meticulous refinishing process to restore the wood's natural beauty and structural integrity.
Yeah, this is a beauty. Thanks very much.
The drawers don't come out very well either.
Oh yeah, that's beautiful.
Thanks very much.
Hi everyone and welcome to the latest video.
You may be wondering who I was thanking for this beautiful piece of
mid-century modern furniture painted in this stunning purple.
Well that would be Jay at Flipping Drawers.
We've become really good friends over the last 2-3 months.
We both have a passion for restoring this old furniture.
We thought we'd challenge each other, so I have chosen
a really terrible piece of furniture for him to work on
and he has very kindly returned the favour and chosen this for me.
We just really wanted to see what each other does with these
challenging pieces of furniture. So at the end of this video
I will link you through to Jay's video and once you've watched this
please head over there because he will no doubt have done
something stunning with the furniture I've chosen for him.
So once again, thanks for watching and I hope you'll be
amazed with the results of my transformation at the end.
Hi David, how are you mate?
Hi buddy, I'm good, how are you?
I'm just calling to say a quick thank you for this lovely
piece of furniture that you've got for me.
This is hands down the worst piece of trash I've ever worked on.
I'm really pleased you like the piece that I've picked for you
but I've no doubt you will definitely be able to save it mate, no doubt.
I really hope that you like that mint condition quality
flower power piece that I've picked for you.
I'm not too sure whether I'd use the word like the piece you've chosen
for me but it's definitely a challenge, it's something
that I wouldn't pick for myself
but it's purple, it's got a lot of flowers on it
and hopefully I'll be able to do something with it.
It's definitely a challenge so thank you very much for picking that for me.
I'm so glad you like it, I knew you would.
Anyhow, I'm looking forward to seeing what you can do with it.
I suppose I'd better let you get on with the masses of work you've got with that piece
and to be honest, I need to get on with this.
Good luck and I've no doubt you'll do something amazing with it
but we'll catch up later on in the week.
We'll do mate, thanks again and I'll talk to you later.
Take care.
As you could see from that previous clip, the drawers weren't very smooth
but we will sort that out later on in the video.
All I'm doing here is having a look why that drawer pull was spinning around
and very simply, it was missing a screw.
So we can resolve that.
All I'm doing now is removing all the hardware ready to start my attack
on this beautiful piece of mid-century modern furniture.
It certainly is a challenge
and there is a lot of work ahead of me
but hopefully at the end you will agree that it was definitely
worth the time and effort.
For those that have seen my channel before, you will know that I
tend to start with a thorough clean of the piece but I knew
straight away after looking at this that paint stripper was the first thing that was going to go on there
so I decided to skip that step for the time being
and went ahead with the stripper.
This is a really satisfying part of the job. Simply apply
this stripper and watch that paint pop.
It's really satisfying when it comes off.
This is after about 10 minutes of the stripper being
sat on top of that paint and this is a great stripper
it works really well but what I did here is
I removed the purple which left some of the undercoat and I just
re-coated with more stripper and then back in with the
scraper and as you can see there, we start to see
that beautiful wood grain and I have my fingers
crossed that that paint isn't covering up a whole
host of problems and you will see
in a few moments that there were some but
nothing that I didn't manage to overcome.
I don't tend to work on mid-century modern stuff. When I say I don't tend to
I haven't really worked on it but I do know that they are
mainly made up of pressed board with a
nice wood veneer over the top. However, the legs
are generally solid wood and once I'd removed the stripper I could see that was the case
with this piece and the legs were what appeared
to be a solid beech which is a totally different colour than the rest
of the unit. At this point, I'd been at this for
about 10 or 15 minutes thinking that it was just
paper and I could soak it with water and like
wallpaper on the walls, once it's soaked in you can just simply scrape
it off. However, it appeared to have had
some sort of poly on it, some poly varnish finish
which I should have known anyway because I do that if I ever decoupage anything.
So I then applied some paint stripper which allowed me to get
that protective coat off and then I thought it would be a
simple case of just scraping it off and this took
forever, absolutely forever. I think
to get to that point there was about an hour just to do that
so I wanted to try a different technique and
I went into the house and stole the steamer
unbeknownst to my better half and I had a go
with the steamer and it did work, it was just really
messy and look at the state of that. It was just taking
so long as well but I managed to get it off in the end.
So this is a bit of a multi-purpose task, I managed
to get the piece thoroughly clean and it was also
neutralising the stripper that I'd used. One task, two
results. I used the same paint stripping method
on the drawers and they came out lovely as you'll
see in a second. I'm just finishing off the stripping
part with some 4-0 wire wool dipped in the stripper
and that just removes any of the residual paint.
So this was a pain in the bum on the sides
and it's actually solid
so I'm going to try a different technique with this. The reason
I didn't do this on the sides of the main unit is because they
had veneer underneath and I didn't want to burn through the paper
and the veneer but for this solid wood drawer it worked
a treat. The drawers
are marked and it's like
melamine so I can't sand it. I'm going to take them off.
As I said there, the drawer bottoms were
marked and they were like a melamine finish so I couldn't sand
them so I had to come up with a different plan and you'll see later on
how I dealt with that.
We've only been in here 30 seconds now.
Have you got one?
Look how many she's got to choose from.
Have you got one? Is he?
I know you all love her having a corks so she's happy now.
As I said earlier
I was hoping that this piece wouldn't need too many repairs
and to be honest it didn't. There were quite a few but they
weren't terrible. This one, the drawer runner had split
so that's just a case of using a bit of a glue syringe
to get some glue in there, wiping off the excess and
then simply clamping that and leaving it to dry. A similar
principle with this dovetail joint. It was just loose so
glue syringe, glue into the joint, wipe off the excess and
clamp and dry. So onto the main unit. This corner
had had a previous repair and it wasn't done great
and it was also damaged again. So all I'm doing
here is I'm trying to match as best I can a grain pattern
from a new piece of veneer and then removing the
section of the old veneer that I want to replace. And that's just a case
of using a very sharp knife, straight edge and then cleaning out
any excess adhesive. What I noticed was
the substrate was also damaged so the chipboard underneath
so all I'm doing here is I'm trying to get a flat edge on that
substrate so I can basically splice
a new piece of wood in there and then it will allow
me to fit the new veneer in the best way possible.
So I've just used some super glue with the fast
activator and then I'm just shaping that back down
with my sander. The next thing to do is make
a template for the piece of veneer I want by sticking
a bit of masking tape on and tracing out the outline of the piece.
Then you apply that to the veneer and simply cut it
out ready to stick on. The opposite
corner was exactly the same so I just repeated the process
for that corner. What I'm showing you here is I've been over
the entire piece including the drawers and marked up any
indentations in the wood. And all I'm doing here is using a hot iron
with no steam setting, some water and a cloth
I'm just trying to raise the grain to reduce the
indentations as much as possible. I'm not
using the scraper to scrape off anything major just some of the excess
paint stripper residual and then I can
apply the sander. So because this is veneer I go
very very carefully with a high grit paper, this is a 240 grit
and along the way I see this
what I think is a water stain but as I go I think it was actually
a burn mark. So you'll see as we go in the video how
I resolve that issue. I actually found something interesting
out from speaking to Jay. He'd come across some people
that thought if you subscribe to a YouTube channel that you
have to pay because I guess the word subscribe often means
that but it's totally free to subscribe to one of your favourite channels
hopefully mine is one of those and if you feel I've
earned it, please subscribe. It's absolutely free.
Once the bulk of the paint had been removed with the stripper and the
sanding there was just some in the nooks and crannies and this
is a little pick tool that I use to get into
those to remove the paint and this was very kindly sent to me from my
Amazon wishlist by an anonymous donor and I'm
really really appreciative of anybody that donates to the channel either through
the wishlist or through the Buy Me A Coffee app. Thank you.
It's time to deal with that stain on the top of the piece.
So I'm using this oxalic acid and I initially apply it to the
stain and then I apply oxalic to the entire
piece to avoid having a bleach mark where the stain is.
I noticed that the drawers also had some
slight discolouration on them so I applied a coat
of oxalic acid to those. This was the
stain after one coat of oxalic so I did another coat
let that dry and this is me just neutralising that
with some clean water before going on to
stain. All I'm doing here is just giving it a quick once over
with the 240 grit because I just used a load of water
on it and it raised the grain ever so slightly. So once I've
done that it's just a case of removing any excess dust with some white
spirit or mineral spirit in the states and then it's on to the
stain. So I'm using my Morel stain and I'm using a
walnut colour just simply applying that with a
folded rag. For those of you that have watched my videos
before you will know that I like to pull out these nice little details
in the piece and these dovetail joints I like to
either stain or paint depending on what I'm doing with the piece
and I just think it really gives an added extra
level of detail. So that's what I did there and this is
the top getting it's first coat of stain.
You could still see the mark on the top after one coat
of stain. So in total the piece got three coats of stain
and all I'm showing you here is the repair I did on
the corner. Not perfect but much better.
Magnetic, not magnetic. It's got gold
in the middle. Gold, see
you can just see the gold.
The magnet trick often tells you whether it's brass or not
because that isn't magnetic.
These aren't brass so they must be some other kind of alloy.
They were gold at one point and they will never be gold again
just by polishing them so I decided to paint them.
All I'm using here is a red etch primer
and this will give it a good key for the top coat.
Once the hardware was sorted it was on to deal with those draw bottoms
and the best method I thought to hide those stains
was to cover them and I had some funky
70's, 60's, 70's style wallpaper that was quite retro
so I decided to line them with that and it's quite
simply use like a border adhesive onto
the back of the paper once you've cut it to size and simply
lay that onto the board. Make sure there's no air bubbles and then leave it to dry.
I'm using an acrylic varnish
in a satin finish for the top coat. It's probably not
the traditional top coat for this type of furniture
I'm sure you would use a Danish oil or something but I like using this
it gives me a nice finish and it also is
quite durable. So I'd give this probably
three coats and for some reason it's supposedly a satin finish
and it was quite matte so I ended up going over it with
a little bit of wax as well just to bring out that sheen
and I will be looking back at my invoices to see if
I ordered the wrong varnish. But all I'm doing there is I do a coat
I use a brown paper bag to knock back any dust nibs
I remove the dust from the piece
with a tack cloth and then re-coat it. So we are coming
to the end of the video and the finished piece. I'm just
applying some Howard's Feed and Wax to the drawers and to the cabinet itself
I really hope you've enjoyed this video and if you have please give it a
thumbs up as it really helps the channel. Consider subscribing and click
the notification bell for more videos. I've loved doing this collaboration
with Jay at Flipping Drawers and I will leave a link to his video
at the end of the reveal. I'll also leave a link in the video description
I've just seen the picture that you sent me. To be honest I didn't
think you were going to be able to make anything out of it
but you absolutely smashed it. It looks really really nice
and I like that the colour actually makes it look more modern
so amazing job. I'd just like to say
a huge thanks to everyone that's watched this video. I really hope
you've enjoyed the process. I know I have. I really hope
you enjoy the final reveal and don't forget to check out Jay's video
at the end of the reveal. Thanks for watching!
