Best Electric Stick Screwdriver

Tools plus
2 followers
So who makes the best stick style electric screwdriver?
I bought 10 here to test.
So let's take a look.
So just like the precision screwdriver video, we're going to be using
the mini dyno here, capturing that torque and RPM, allowing us
to take a look at the watts or the power out.
Loading a tool here with this particle brake.
Seeing that we have a little more power here with these tools.
We can look at that watts starting off with the Friobi here coming in at the cheapest.
So some interesting data here.
Very surprised max watts out with the Dremel on top, followed by the DeWalt
and the Amazon Basics with the Craftsman, Friobi and Vessel there coming in last.
So we look at hard joint max torque.
So a fastener that's already tight and you're trying to remove.
Surprisingly, Amazon Basics here comes out on top, followed by the WORX
and then the Dremel with the Craftsman, Skill and Friobi rounding out the bottom.
Max torque dynamic.
So if you're driving a fastener in, Fantic here actually comes out on top,
followed by Dremel and DeWalt, but again, Craftsman, Friobi and Vessel
rounding out the bottom.
Now, some of these have multiple modes.
So mode one is going to be the highest torque and mode six is going to be the lowest.
And where it says low, the meter here actually could not register the torque.
So it is lower than 0.10 Newton meters.
So just like you see in previous videos, going to be using the Klein USB
multimeter here so we can take a look at charging time, charging amps
along with the milliamps here put into the tool to try to gauge
the capacity of the battery.
Battery charge time works on top, followed by Vessel and Skill.
Along with that charge time, of course, there I looked at the charging amps
works on top, followed by DeWalt.
So along with knowing the time and the amps, the USB multimeter
provided the milliamp hours.
So the amount of energy that actually went into the tool there
while charging from zero with Fanatec, Amazon Basics and DeWalt on top.
So my ranking is going to put the Craftsman here in last.
The USB-A to micro USB cable, a small little assortment of bits here.
You have the battery charge and charging indicator here on the back,
along with that micro USB port, single speed with your forward
reverse air buttons, two LEDs on the front.
Now it does have a locking collet, but you do have to unlock to insert a bit.
And of course, to pull the bit out overall, I do like the grip on this
and the design, but again, the performance wasn't the greatest
with an MSRP of $40 and being made in China.
Following that with the Ryobi, we also have a micro USB cable, two bits,
tool itself, micro USB port on the back, battery indicator there as well.
Single speed, forward reverse air, just like the Craftsman,
two LEDs on the face and a magnetic bit holder.
Overall, a little bit better there with the MSRP here coming in at $25
and being made in Vietnam.
The Hato with this plastic case, no charging cable provided,
small little assortment there, a bit USB-C charging port on the back,
battery indicator, forward reverse air, also single speed,
but with a three position clutch here, LED light ring and a magnetic bit holder.
MSRP of $40, made in China.
Skill Twist, nice little case here with a latch, USB-A to C cable,
assortment of bits, USB-C port on the base, three electric torque modes
with a manual mode, forward reverse here on top, single LED, magnetic bit holder,
and a couple position pivot here by pushing this button.
You have three positions versus having to use this in a straight orientation.
Coming in here at $40, made in China.
Vessel, now you can get this in a couple of different configurations.
This is the 220 plus tool only.
Comes with a USB-A to C cable along with a single Phillips bit.
On the base, you have that charging port and a tether location.
Moving forward, we have a status LED here, which is used for charging and which mode it's in.
This is a three mode.
So if we press this, now we're in high with a solid green LED,
low, flashing rapidly, and then we have medium, which changes the speed and the electronic torque.
So below that LED and button, we have the forward reverse with a small little LED,
a locking collet, which has to be pulled back before installing and removing the bit.
Nice little compact design here.
MSRP for tool only of $47, but something to keep in mind, it is made in Japan.
DeWALT, 80 USB-C cable, small assortment of bits.
Speed and electronic torque adjustment here on the back, ranging from 1 all the way up to 6.
Charging port, battery indication.
Kind of an interesting design here they chose for the trigger.
You have your lock position and forward and reverse there,
where you push up on this collar to drive the screwdriver.
With four LEDs here on the front, along with a quick insert collet,
which only needs to be pulled when removing the bit.
Overall, not bad, but it drops here in my ranking because of this MSRP of $90,
along with it being made in China.
Coming in third place, going to be the FANUC here in this aluminum case,
which stores this small assortment of bits.
Charging port here is on the back, and this ring will illuminate when it's charging.
Single speed with four reverse, with three torque positions,
along with an LED light on the front and magnetic bit holder.
Overall, pretty good performance with an MSRP of $80 and comes in that nice case and is made in China.
Second place here, we have a tie in my opinion, because these are basically from my testing,
the same exact tool here with the Amazon Basics and the WORX.
With the WORX coming in this plastic case, USB-A to C cable, small assortment of bits,
charging port on the base, three selections of torque modes here with this button.
Forward and reverse there, LEDs on the front with a magnetic bit holder.
MSRP of $40, made in China.
Amazon Basics, that A to C cable, small assortment of bits.
And we don't need to go through everything on it because, yeah, it's almost identical here to the WORX.
As we've seen, it provides some impressive performance.
So to me, it really comes down to the price that if you can get the WORX near the Amazon Basics,
that case is kind of nice to store it in.
But overall, based off MSRP, the Amazon Basics is the better value.
Now, first place, I was shocked by this.
Coming with a wall adapter, A to micro cord, small assortment of bits with the tool itself
having a tether location on the back, the micro charging port, the charging indicator,
your forward reverse there button, your power button, along with the ability to just push on the front
and it will activate the screwdriver versus having to push the button.
And a six position mechanical clutch, all coming in at $50 MSRP and is made in Malaysia.
So there you have it.
Third place going to give it here to the Phantek.
Second place, these are pretty much the same.
So the Amazon Basics or the WORX really depends on if one or the other is on sale,
in my opinion, if you want a case.
But first place is going to go to the Dremel here.
Hopefully you found this video useful.
Let us know in the comments if you have any of these.
And like normal, the links will be below.
Along with the specs here at the end.
Thanks for watching and I'll catch you on the next one.
