5 MAJOR 4WD RECOVERY MISTAKES & How to Avoid Them!

Automobile Identity
371 followers
#automobile #autos #cars #4wheels #luxurycar #sportcar #highspeedcar #testdrive #toyota #tesla #porsche #hyundai #rollsroyce #royall #suvs
You are 100% going to get stuck when you go four-wheel driving one time in your life,
and there is a very right way to get unstuck, and also lots of very wrong ways to get unstuck.
Now, that is exactly why I'm out here today. Class S Mansour the mate,
home from EFS. He's brought the mighty Triton out. I've got the big GU. We are going to show
you how to get unstuck out of any situation, and the five common mistakes four-wheel drivers make
that can even get yourself hurt. Welcome to our second episode of Back to Basics.
Now, let's talk about the gear you need if you're going to go off-road.
Bare minimum, if you're going off-road, let's say you don't have a winch, but you've got a
four-wheel drive with some rate of recovery points, don't be that guy with no gear. Get
yourself a simple kit. It will come with either a kinetic rope or a snap strap and two soft shackles
or a D-shackle. Kinetic rope and soft shackles are basically what you need to connect your four-wheel
drive up to another. This is basic recovery gear that can help you get out of strife if you get
stuck while you're wheeling with mates, or if you're in a popular four-wheel drive area where
you can ask a fellow four-wheel driver to give you a hand. But if you've got yourself a winch on the
front of your four-wheel drive like Tom does on the EFS Triton, you're probably going to need a
kit with a few more things in it. Things like a tree trunk protector, wrap it around the tree,
protect the base. You can also wrap these around parts of the car. These new winch style rings,
it's a new style of snatch box, super light, you can chuck it in your pocket. A couple of soft
shackles, obviously you connect up a double line pulling thing back to the vehicle. Now,
a winch extension. These things are super important. Obviously, you know, a standard
low mount is around about 28 or 30 metres of rope. If you get really stuck and you're doing
double, triple line pull, use that rope up super quick. Most of this gear is going to help you use
your winch in more advanced recoveries that we'll cover later on in the video. And, of course, a
winch blanket. This thing just keeps everything safe. If there was to be a break in any of the
recovery gear, it'll dampen it, everything will fall to the ground instead of flicking up and
hitting people or your car. And last but not least, probably the most important bit, a big,
generous bag to fit this stuff in. Obviously, some of these recovery kits come with bags,
you're jamming them in there, it's like a tent. Once you unpack it, it'll never fit back in the
bag. But these bags are big, they've got nice handles, all this stuff fits in there super easy.
Now, we're going to specifically look at the different types of recoveries, starting with a
tow or a snatch recovery. A tow or a snatch recovery is when two four-wheel drives are
connected so that one vehicle can pull the other out. This recovery uses a kinetic rope and soft
shackles to connect everything up. But there's a few things you need to make sure you've got right
before you even connect this up. So, in a tow or a snatch recovery, you're going to have a
What you want to do is, these things are rated. You want to have this rated to suit
two or three times the vehicle's GVM. But let's say you've got a lighter vehicle, say the Triton
towing out the patrol, you want this strap to be rated to suit the lighter vehicle, which would be
the Triton in this instance. That is so that the stretch works and helps you with your recovery.
Now, the way to tell whether you're going to be doing a tow or a snatch recovery is pretty simple
because it plays out if you're doing a snatch recovery anyway. Basically, take off, the lead
vehicle will take off slowly and take up the tension. And if you start driving and the vehicle
behind you starts to going, that's you beauty. You don't need a snatch. You're going to tow him out
nice and easy, controlled. Now, this happens some of the time, but a lot of the time, if you're on
the beach or if the vehicle is stuck in mud, you do need to use that stretch in the rope to help
you. Obviously, other car can get stuck in front. Now, let's show you a snatch recovery in action.
What's happened here is Tom has gone and slipped in a bit of a mud. We're trying to go around and
he slipped in. So, we're going to have to try a bit of a snatch recovery because my car is still
on the other side. Obviously, we're going to set it all up. The big patrol is now all hooked up to
the triton with the kinetic rope. What I'm going to try and do first is just take up the tension
and see if I can slowly tow him out. Got both lockers on. Might scrabble a bit. Rightio, Tom, I'm just
going to take up the tension and see if I can give you a bit of a tow. Make sure your front wheels
are straight. If that doesn't work, we'll revert for a bit of a snatch. Copy that, mate. Let's go.
So, the triton is quite stuck. Obviously, took up the tension. The patrol just skating around. I'll
back back and might have to give it a bit of a snatch and allow that stretch in the strap to help
me pull the triton out. Because he's in reverse, I'm going to call him up and make sure his wheels
are straight. Make sure it's ready to go and we'll give it a go. When you're in a situation like this,
you can almost take off and you sort of back off when the strap goes tight because it uses itself.
As you can see there, you probably felt it in the car. I took over the Heber Gusto. You probably
nearly saw the patrol go backwards. I was backing off the throttle. The strap sort of stretched. The
triton popped out and we got him out. Now, all of us have probably seen some of those silly videos
where their mate backs up to the bull bar and takes off flat out. That is not a snatch recovery.
That is just means to break something. You either rip a recovery corner, rip a bull bar off or just
break your recovery gear. So, you probably only need to come back about a quarter of the strap
length. You don't have to back back, touch your mate's bull bar and take off and grab a couple
of gears. It's not going to get you anywhere but some broken gear. We've demonstrated a toe recovery.
We've demonstrated a snatch recovery and now Tom has got himself stuck again. It's a perfect
situation for us to demonstrate the good old-fashioned single line winch pull. There's a
bit of a tree root step on the back wheel there and his back diff is just stiffed out. He doesn't need
a great deal so a single line pull will definitely do it. The recoveries we'll be talking about from
here on in will require the use of a winch. To pull off a single line pull like we're about to,
you also need things like a tree trunk protector and a winch dampener. A single line pull is when
you use your four-drive winch to recover it with the use of an anchor point. As the name suggests,
this recovery happens with only one line straight to the anchor point. While you can use other
vehicles as anchor points today, we'll be using a tree as our anchor point. I've actually got the
winch on free spool here. I've sort of eyed off a tree I want to pick and in a situation like this
what I normally do, I pull out what I think is going to be enough and lock the winch back in.
That way if the car is in a sketchy spot and it does start to slide and you hook up,
they can winch in straight away. And number two, you don't have to trek back down the slippery
steep hill to lock your mate's winch in. So it's just a guesstimation but it's super handy if you
know this does get spicy down here. It's already locked in and ready to winch. Now, I've chosen
this tree on the right-hand side of the track. It's up super high and you're probably thinking
you can only see half the triton down there. Why have I gone this side? There's a bit of a corner,
a left-hand corner where Tom is stuck and there's a big high bank. It's a common mistake lots of
people try and make the winch pull straight as possible. They'll go to a tree over that side
which could work but it also could cause panel damage or even lean the car into the bank. So
this, what this is going to do being up higher, it's going to pull the vehicle down on the driver's
side away from the bank and he'll be up there safely without touching any mirrors or panels.
This is a bit of a modern day debate whether you do still need to use a winch damper. Now I've got
things like soft rope on it using steel cable. In my eyes, you need to use in any recovery you
possibly can, even on a snatch recovery, because what this does is pretty much tries to make, if
there is a break, it tries to make the rope drop to the ground and take away some of the energy as
soon as possible to make sure that this doesn't fling back any windscreen or any bystanders.
I always put it over the heaviest point of the recovery, so whether it be a single line pull
over the winch hook or a double line pull, as close to the pulley block as possible.
And where you can, just try and hook it on something so it doesn't slide down during the recovery.
Another little trick I like to do is before the winching actually starts, just get your mate to
take up the tension in the car, especially on a pull like this, it isn't dead straight,
and just run your eye along the winch rope and check it's not hitting any debris in the bank.
If it is, you've got another winch damper around, put that over the rock or tree,
or if it's hitting one, just to save your winch rope getting any damage.
In this situation, we're lucky it's not hitting anything and Tom is ready to go up. So there's
one more thing for me to do and that is get right out of the way. I'll try and get, my rule is about
half the length of the winch rope out of the way. I'm going to go up there and stand near a tree.
Rightio, I'm now well and truly out of the way of the winch and Tom is ready to winch up. I'll
call him up and we'll get the Triton up the hill. Rightio Tom, I'm out of the way mate, bring it up.
What you're going to do in a situation like this, when you're really close to a bank,
Tom's doing an awesome job of it, is let the winch do most of the work. Obviously,
a little bit of drive, but you don't want them wheels to spin, because if they spin,
you can see Tom is going to fall into the rut and the Triton's going to be on the bank.
Obviously, the winch line being hard off to the right, pulling the car up is definitely helping
and Tom going nice and slow is going to stop the car from sliding in and cause any panel damage.
But one of the most important things in any recovery is take your time, because if you take
your time and do it nice and slowly, chances are you'll get un-stuck without any damage to your
vehicle. This is exactly why you've got to let the winch do most of the work. You see, Tom's started
to drive, the vehicle started to drive and the winch has gone slack, as you can see, and the
car's just gone into the bank. It hasn't dinted anything, it's just leaned in, but if we get Tom
to pull that winch in, you'll see the whole vehicle lean away from the bank and we'll just
rely on the winch a lot for this recovery. When you think you're up and you can unhook the winch,
what I always do is you make sure you can just drive forward, because there's nothing worse
than unhooking the winch, packing all your gear up, going to take off and you're still stuck. So
when you're up and you think you can drive, make sure you can drive just enough so you make it
unhook the winch, you don't have to winch out, and that way you know you can move forward once
you're all packed up. We've talked about the snatch recovery, we've talked about the single
line basic winch recovery, now we're going to get a bit more in-depth. We're going to talk about a
double line pull, when to use it and how to set it up. Now, double line pull is generally for when
you're really bogged down, you're super stuck and you can hear that winch loading down. If you've
got a vault schedule in your car, you can see the vaults drop and, you know, your wheel speed isn't
really matching your winch. You probably should call it there and just reassess the situation.
If you have enough winch rope, do a double line pull. A double line pull is a step up from a
single line pull, with essentially two lines running from the anchor point back to the vehicle.
Usually the rope is doubling back on itself and attaching to the front of the vehicle.
To perform this recovery, you'll need everything you use for a single line pull, but you also need
to throw a winch block and a soft shackle into the mix to allow the rope to double back on itself.
Oh, it appears we have lost forward momentum. Tom decided to give this mud hole a bit of a go, and
obviously he's stuck on the entry. Now, seems like there's a bit of a step at the end even. We might
need to do a double line pull, but obviously you use a lot more rope doing a double line pull, so
we're going to connect it up as a single, see how it goes, and if he does need to do a double, he's
obviously a lot closer to the trees, which will work out well. As you can see here, we're sort of
right at the crest of the mud hole in the front, trying to pull up, and as you can see, the Triton
is pushing so much mud, it's really starting to bog down the winch. So what we're going to do here
is a double line pull, and what that does is half the loads on the winch. It also halves your line
speed, so the winch is a lot slower, but it has a heap more pulling power. We're going to use one
of these new recovery rings from EFS. This is a newer version of the old school snatch block. These
things obviously run on friction, not a bearing. We're going to put it in here, the rope will pull through
here, and it'll be a double line pull, and it'll half the load. That's all set up now. It's actually super
simple to set up. The winch rope runs from the car, through the snatch ring, all the way back to the car,
to a rated recovery point, where you dampen up here, where the heaviest points are, run the strap
up nice and high, obviously because we're trying to peak out of the mud hole here, that will half the load
on the winch. It'll also make it a bit slower, but it means we'll be able to get the Triton out without
damaging the winch. Now, if the double line pull isn't working, your winch is still bogged down, and you're
that stuck, or maybe even you broke a rope, if you've got a few more of these, obviously the more cars
you've got in the convoy, the more of these you've got, you can just keep adding these in, as long as you've
got winch rope, and that's just going to keep making the winch work easier and easier. But a really,
really cool trick that I worked out is, in either situation, if the trees are in the right spot,
and you don't have anyone else around, and you've got three of these things, you only need three,
you can make your vehicle winch backwards using the winch on the front of your vehicle. Now, I'm
going to set that up and show you, it's actually simpler than you would think. We've got a winch on
the front of the D-MAX, we've got three pulley blocks here, we've got the winch running through this one,
back to the tree, then back to the car, and then back to the tree again. And what I'm trying to
achieve here, is show you guys that you can winch this car backwards by using the winch on the front
of the vehicle. But this little tip here could help you get unstuck if you're out by yourself, and you've
ran out of ideas. How cool is that? It actually worked. Now, I've seen people try and do this
before, but they forget this pulley block, so they go from that one back to here. What happens then,
is everything just tries to winch itself together. You're trying to pull the trees and the car into
itself together. What the secret is, this one here, this piece of rope that goes back to there,
obviously, when you're winching in, that gets shorter, and that's actually what pulls the car
back while this rope is still going into the winch. So it's quite a complex setup, but as I said,
you're not going to use every time you go wheeling, but if you keep this in your memory bank,
it could just save you one day when you're out on your own, or you're super remote, you only
got a front winch, and you could be stuck with no trees in front of you. Keep this in mind,
and it could save you. There also is another winch scenario that I come across quite often,
and probably some of yous do too. You come across someone on the track, or one of your mates just
doesn't have a winch, they haven't got one yet, and they're stuck. You need to winch them out. Now,
one mistake I've seen people make here is, obviously, a lot of these winches have hand
remotes these days. They're out of the car with the winch remote, and they might have tied their
car to a tree, so it's fine. But they're just standing there watching, or standing back watching
with this remote, and their car's sitting there at idle. Obviously, these winches pull a lot of
volts out of the car, and when you're winching yourself, you know your wheel's spinning, your
revs up, it's charging. So I've seen a few people kill batteries and alternators. And another thing
is, if you've done a few hard winches, or you've done a double one pull, or triple one pull, your
winch could be hot. When you're packing up, if you've got a hot winch motor, just pulse the button
in. Don't hold it flat out, because the brush packs can get quite hot, and when they start
free spinning, that's when they can jam up, and you can have a motor failure. There's tons of
little things to worry about when winching, so here's five quick-fire tips to help you out.
One thing I said before about recovery, and it's across the board. Any recovery you're doing, what
you need to do is have good communication with the people in the car, and outside the car, setting
things up, and take your time. Even if you're in a bog hole, and your car's filling up with mud, or
your car's in a real bad angle, no point rushing. That's when mistakes get made, and people can get
hurt, or you can damage your gear. Another good trick, let's say if you haven't got a big enough
tree to put the tree trunk protector up nice and high, is you can take your spare wheel off,
and put it under your winch, right at the exit of a mud hole, or banky trunk winch up. What that does
is pops the car out of the mud, and pulls it along, and also just because you're winching, that doesn't
mean you have to let the winch do all the work. Say you're balied out on a rock step or something, and
it's heaps of load on the winch. Yeah, you can go for a double line pull, but another thing you can
do, and a lot of people forget once they get the winch out, is you can still pass. Once you're in
the winch, and it's all safe, you can roll back a little bit, get your mates to throw a couple of
rocks and logs in there, and if that means your wheels are going to be a bit high, and you're not
going to baly out, one, it's easier on your vehicle underneath, and two, it's easier on your winch. One
thing I see people make many mistakes on, I've even seen cars roll because of it, you're winching
up a hill, and the winch is holding your wheel lift down, you get a bit of drive, people get stoked,
they start driving, they out-drive the winch. One reason you don't want to out-drive the winch in
a situation like that, is you never want to jerk back on the winch. It can cause damage, or even
break a rope, and two, if you're close to a bank or something, jerking back like that can cause panel
damage. One of the biggest concerns when you're out forward driving, and doing recoveries, is safety.
We've all seen those news headlines about people getting killed, or seriously hurt about the old
tow ball pulls, and non-rated recovery points. So before you even go off-road, make sure you
obviously got a recovery kit to suit your car, and rated recovery points. Now there's lots of these
cars that have got factory tie-down points, you can't tow or recover off them, because they'll rip off
and cause some harm. A few real simple things too, you know, some of you might notice, some of you
might not, you might be just getting into forward driving. If you've got a rope jammed up, don't put
your hands too close to the fairlead, if you're going in and out trying to get it unhooked. If you can,
hook it to a tree, put on a free spool and reverse back, if not, make sure your hands are about a
meter away from the fairlead. If the winch has got a bit of run on, your hands are safe then, you're not
going to chop them off. Always use tree trunk protector, always use a damper, all these simple
things, you know, that time you don't use it, you might break a rope and things flick back. If it
takes you an extra five minutes to do the recovery, but everything's safe, you don't do any vehicle
damage, and no one's hurt, well that is a good five minutes spent in the bush, I reckon. So that's just
a couple of things to keep in mind, obviously it's a lot to take in right now, but honestly the best
way you can get the hang of all this, is bolt your winch on, get your recovery gear and go out on the
tracks and get yourself in some bad situations and make sure you can get yourself out. Trial and error
is the best way to learn. Well that's all I've got time for today, I hope I taught some of you
a thing or two, and if I left a few things out, throw it in the comments below, or even if you
like this style of video, throw it in the comments below and hopefully we can do some more things
like this and pass on a bit of knowledge to new and upcoming forward drivers. Anyway, that's all
I've got time for today and I'll see you next time on 4WD 24-7.
