The Foundations of Syntropic Agroforestry

FFG - Food Forest Garden
176 followers
Kia ora everyone. This week's video I'm going to be doing a series of drawings that take you through
the plant identification chart that we use when we gather information and observations of all
the plants that we use and the vegetation that we have around us. In our chart there's three
core principles of centropy which we relate a lot of those categories to. There's many different
categories that are relevant to those core principles and I hope these drawings will
highlight and clarify these as a way of integrating the information into a centropic
design context. So the first principle strata. So strata is capturing as much sun as you can
before it hits the ground and we do that by understanding the different canopy layers that
a plant occupies and these canopy layers aren't so much to do with the height of the plant but the
Our first layer is the emergent canopy. Then we have high, medium and low. Again not only referring
to height, for example here we have an annual version of this where we have the classic three
sister situation where we have the pumpkin sprawling out and occupying that mid to lower
strata area. Then we have the corn pushing upwards occupying that emergent layer and we have a bean
climbing up that corn capturing the sun on that medium to high layer. In this way in any consortium
in any community of plants you'll find that they stratify themselves out into their different
niches occupying different spaces not creating competition. Another category we want to go
through here is frost tolerant. So much like we covered with the sunlight we want to also observe
the degree of frost that a plant can tolerate. When we understand this we can put it into
its appropriate strata in relation to frost as well where we have the emergent canopy as the
most frost tolerant offering protection to the lower canopies that have decreasing tolerance to
frost. Keeping in mind here that we also want to make room for the amount of sun that the plant
requires as well and this is where pruning comes in handy. So within pruning we have a few different
methods. We have coppicing which means you cut that plant right down to the bottom and just
reshoot from a stump or pollarding for if you want to maintain the strata that the plant is
or prevent any animals from reaching the regrowth. Then we have staghorning which is where we leave
the main branches of the tree but remove all the green foliage and then there's plants that only
can handle a minimal amount of pruning. In those situations we don't want to remove any more than
30% of the green foliage. So we have coppicing, pollarding, staghorning or minimal. Next we want
to observe whether the plant is deciduous or evergreen. So evergreen means that it remains
with leaves throughout the year dropping the leaves gradually and deciduous means the tree is
bare at winter so it drops all its leaves. Within one species of plant you can have different
varieties that drop their leaves at different times of a season. We also look at the leaf
litter that is dropped. Brown leaves are high in carbon and the nutrients has been absorbed back
into the tree. Green leaves are higher in nitrogen. The leaves have actually retained a lot of the
nutrients from that tree. These trees for example Italian alder, they're optimal trees for a silvopastoral
system where animals can actually graze the grasslands in amongst the trees and also eat the
leaf litter as an additional fodder. Next we want to consider the climate zone. Whether the plant
is naturally from a tropical zone, subtropical or temperate and this is valuable information as we
can then fine-tune our stratification in our food forest to create that optimal environment. We then
also consider the sun intensity that we have. So in our tropical zone if we look at our strata within
a tropical zone we find that it's actually quite evenly distributed throughout the different
stratas. That density is very present in all the different layers because of that high intensity
sun that is able to be captured. In our subtropical zone we have a much higher emergent and high
strata compared to our medium and low. This is due to the decrease in sun intensity and we also have
the slight presence of frost in a subtropical zone. And in our temperate regions our stratification
we have a very little emergent and high strata and a very dense medium low strata with a lot of
herb forms covering the ground capturing a lot of that sunlight mainly in the lower stratas and
the increase in frost. When we understand this we can fine-tune the degree of sunlight that plant
needs, our functional strata density as well as creating the optimal conditions for each plant
to thrive. Be that the right amount of sun, frost protection or ventilation. Our second principle
of centripe is a life cycle. This we determine as annual, biannual, short-lived perennial,
long-lived perennial or primary and you see the years written down there. This is an example
of degree of density we can get away with when we understand both the strata of the plants
and these life cycles. We can create and attain that optimal and functional density and diversity
over time and space. So for example all those plants that we saw in that diagram previously
we can see play out like this. So in the first year we would have our avocado tree,
in amongst our tamarillo tree, in amongst our cherimoya tree, in amongst our eucalypt tree,
in amongst our ingur bean, also planting in our annuals that we mentioned corn, beans and pumpkin.
Fast forward to 20 years, here we have our mature emergent ingur bean canopy with our mature
fruiting avocado tree happily under the emergent canopy of the ingur bean in the high layer and
then nestled among them we have our cherimoya tree also in fruit production nestled among them
quite happily in that medium to low strata layer. Okay our third principle of
centropy is succession. So succession is looking at ground formation and vegetation. So we have
our establishing phase, accumulation, transitionary and abundant phase and this is to do with the soil
fertility. We'll find that the vegetation in these areas differs slightly. So in our establishing
phase that's where we see more lichens and mosses as they gnaw away at bare rock to start generating
soil. Then in our accumulation phase we will have thistle, gorse, tea tree, conifers. All those don't
produce any fruit but are there to open up the soil and accumulate nutrients. This is broken up
into individual little life cycles. Those plants in that phase will be very different to the next
transitionary phase and the abundance phase. Again we have the same life cycles of plants
however they start becoming more lush and then abundance phase again this is where we see most
of our annuals come from or our main fruit and we see an even more of an increase in really lush
lush green leaves. So the accumulation phase is a place to repair. Transitionary phase you start
seeing a bit of fruit production whether it's citruses or raisin tree fruits as it progresses
and transforms into more and more fertility. And our abundance phase is where we see all our annuals
big fruit like avocados and bananas or apples if you're in the temperate zone. Succession refers to
the amount of soil fertility that's there and we observe this by observing the vegetation
and we can work with that vegetation to generate fertility. So we want to with
observe and utilise the vegetation in space to accelerate our regeneration of our land
into a centropic system where we're encouraging life processes as much as we can. The next category
we want to look into is propagation. So we can either take cuttings, stakes which we can push
directly into the ground, root suckers or runners or directly plant things by seed.
When we plant things via seed we have an increased genetic diversity and we also increase therefore
the resilience against diseases. When we propagate our plants via cuttings, stakes, runners or suckers
we are essentially propagating clones of that original tree meaning that we don't have any
genetic diversity. On the plus side they reach maturity sooner however they don't form true
taproots as they would via seed. The last category that we highlight in our plant profiles any unique
characteristics specific to that plant. Because the first plant we're going to be releasing is
our tetonia diversifolia, the Bolivian sunflower that is so close to our hearts, I'm going to
touch on that as the unique characteristics. So for example here we observed that is most suited to a
situation that's smothered in savanna grasses. So in Northland here in New Zealand that is our kaikuyu.
Our tetonia is a benefit to us there in its characteristics that it grows from stake, pushes
out quite quickly so it's a fast growing plant and creates that dense shade. But it doesn't just work
with shade either, a specific unique characteristic. It actually has an allelopathic relationship with
savanna grasses where it actually emits its own chemical against those grasses. Its other
characteristics is that it flowers beautifully in autumn attracting a lot of pollinators. The
environment that the tetonia creates becomes this nurse environment for those trees to germinate
and push through up through the tetonia and become a forest again. So in this sense the tetonia is a
forerunner of the forest. That concludes our breakdown of the plant profile template that we
use on all the different plants that we utilize. It is through observing and understanding and
collecting all this information on each plant that we can really understand their function
and within that we can stack in both fruit trees, pollinators, native trees essentially creating a
very dynamic and functionally dense ecosystem that we can be a part of as orchestrators. We encourage
you to go out and gather this information on as many plants as you can and if you haven't already
jump up to our interactive tier where we will be releasing our own plant profiles to help and aid
in this process as well. Thanks for watching, forward to seeing you all next week.
