Dollar Tree Diys/Patriotic Diys

Holiday Decorations
97 followers
#dollartreediys #dollartree #dollartreediy In today's video, I have 8 Dollar Tree Patriotic Diys. Some of these would make really cute centerpieces for cookouts and the upcoming Holiday events, such as Memorial Day, July 4th, and even Labor Day. I hope you enjoy these Dollar Tree Diys, and if so, please Like, Comment, and Share with your friends. Also, if you haven't done so already, I would love for you to click the Subscribe button and the notification bell so you will be reminded the next time I upload a new video. Don't forget, I post a new video every Saturday at 7pm est.
Thank you everyone for your love and support of my channel, I really do appreciate you!
Hi everyone and welcome back to my channel. I am so excited to be sharing with you today
eight Dollar Tree patriotic DIYs. So let's go ahead and get started on our first project.
Using some of these wooden star cutouts, you can find these in the Crafter's Square section at
Dollar Tree. Because I'm going to be using three of these, you will need two packs because they
only come with two stars. I am also using an American Flag napkin that you can pick a package
of these up at Dollar Tree as well. I'm going to cut the squares of this napkin out and then I'm
going to peel the napkin apart, just pulling that white piece all of off of the back so that you are
left with just the front piece. Then I'm going to hold my stars in place to determine where I need
to cut these napkins out so that I can attach these to the stars. I wanted to have one with
the navy blue background with the white stars and then two with the red and white stripes.
So I did make sure that I held my red and white stripe ones in the same place so that I could have
the exact same design on the two stars. To attach this napkin to the wood cutout, I am using some
Mod Podge and I'm making sure that I put a nice even coat, especially around the edges. Then I can
just simply place my napkin on top of the wood cutout and then very, very gently press this out
to make sure I get any of the wrinkles or if there are any air bubbles in there out. And then if
there are some corners that are not staying down, I can add a little bit of Mod Podge to that
and then press it down. I will repeat this with the other two stars for the red and white stripes,
again making sure that I line them up so that they both match each other. After the Mod Podge
completely dries, I'm gently going to take a piece of sandpaper and sand all the excess off
going in one direction around this entire piece. And I will do that for all three stars. You're
going to sand it one more time and then you'll have a nice precise star and it will remove all
of that excess. Once all three stars have been sanded, I'm going to use some barbecue skewers.
You can get these at Dollar Tree. And I'm going to cut them down. So I wanted the red and white
to be the same length, but I wanted the one with the white stars on it to be a little bit longer
than the other two. Once I have those cut down, I can then attach them to the back of the stars
using some hot glue. So I'm going to put a nice generous amount of hot glue. And then I'll set
the barbecue skewer on top of that. And then I'll add a little bit more hot glue on top of that,
just to make sure that it stays in place. And I will repeat this for all three stars.
Then I'll set that to the side, make sure that that hot glue cools off. And I'm going to use
this super adorable farmhouse patriotic bucket from Dollar Tree, as well as one of the styrofoam
balls. I just hot glued that and set it in the bottom. And then I'm using some of this patriotic
bundle. Again, you can get this at Dollar Tree. And I cut the stems off of the bundle. And then
I'm going to remove the greenery that came on that. For this piece, I just wanted to use the
blue flowers. So I'm going to cut that down so that the flower will sit flush with the top of
the bucket. And I'm going to place three of those in the front. And once I have those in place,
then I can add my stars that are on the barbecue skewers. And I'm just going to place the
blue star in the middle. And then I could put the red and white ones one on each side.
And then I can go and add the rest of my blue flowers to the back. So I did use almost two
bundles of those patriotic flowers so that I could have enough of the blue flowers to go at the
bottom. I also made sure that I added some hot glue to the barbecue skewers inside of that floral foam
to make sure that they would stay in place. Then you can fluff out your blue flowers. And now you
have a beautiful centerpiece that you could set on your tables if you're having a barbecue or a
cookout. I think this would be a very festive centerpiece. I hope you like project number one.
Now let's get started on project number two. Using some plain poster board from Dollar Tree
and using my paper cutter, I am going to measure out the size of this flag. Now this flag comes in
a package of three at Dollar Tree and it's kind of made like nylon. I'm going to carefully cut
the flagpole from it. And you want to be very careful because those ends will fray. Then I
measured the width of the flag and cut my poster board down. And then I can line up the length that
I need the poster board to be and cut that down. To attach the flag to the poster board, I'm going
to use some Mod Podge. Again, make sure that I put a very nice even coat, really emphasizing on those
outside edges. Then I can place the flag and I'm going to start on the left hand side and press
that down so that I can work my way to the right hand side and making sure that I am pressing it
and getting any kind of bubbles or wrinkles out. And this nylon really sticks very nicely to this
poster board. Any pieces that didn't glue down, I could go under that and just add a little bit more
Mod Podge. And I did make sure that I added some extra Mod Podge around all of the outside edges,
especially the left hand side where we cut it from the pole. Then I will make sure that that
completely dries. And then if I have any extra poster board, which I did, I just used the paper
cutter to trim that off so that it was nice and even. Now I'm going to use this large hurricane
container from Dollar Tree. And we're going to set that onto the poster board. And I am going to pull
that up to make sure that it's right under the curvature at the top of this hurricane. Then I can
add some hot glue to the end and hold that firmly in place onto this glass container until the hot
glue cools off. And what I love about this piece is when the holidays are over, if you want to reuse
your hurricane container, you can just simply take this off and the hot glue will come off very easily.
I rolled that up and then I'll pull it very tightly on the other end and add a very good
amount of hot glue to that piece and then hold it onto the other side, making sure that all of the
stripes line up together. And this was a perfect fit. Then I will take some white rocks. These are
the white pebbles that you can find again at Dollar Tree. And I'm going to fill the container up at the
bottom just enough so that it covers the clear portion of the glass under the flag. To decorate
this, I am using two bundles of these gorgeous white roses. I believe I picked these up at Walmart
a couple of months ago. I'm going to cut one of the bundles down shorter than the other so that
they'll look like they are stacked once I place those in there. And I can fluff this out and set
that entire bundle into the rocks. And then I'll take the second bundle and put that right behind
it so that it is nice and full. And I think this piece turned out very, very pretty. Again, would be
a beautiful centerpiece if you are having a celebration, a cookout, a barbecue, a dinner,
whatever you want to use it for. But I think it would be a gorgeous centerpiece. If this is your
first time visiting my channel, I would love for you to click that subscribe button and the
notification bell. Visit me on Instagram and also my website and my Pinterest board.
Okay, you guys, project number three is so, so simple. Using two of these glass candle holders
from Dollar Tree and the Apple Cinnamon Red Potpourri, we're just going to fill these up about
three quarters of the way full. And then we're going to use two of the LED star-shaped lights
from Dollar Tree. Remove the little tabs from the back and turn the lights on. We can set them
right on the top and this would make some really cute pieces to set. Again, if you're having a
cookout, you could set them on your end tables or whatever. It's just a really cute, festive piece
and so, so easy to make. I hope you like project number three as well. Let's go ahead and get
started on project number four. Using this collage frame from Dollar Tree, I'm going to remove the
back and all of the insides. I'm going to take that paper piece that has the pictures on it
and I'm going to use that to attach my American flag to. This is the same American flag we used
in the previous project with the hurricane that comes three in a pack. Again, I'm just going to
carefully cut that off of the plastic pole that it's attached to and then I can mod podge this
to the paper backing. Now, if you want to have a little bit more of a sturdier piece,
you could attach this to some poster board just like we did on the hurricane base. I just centered
that up on the white piece of paper, smoothed it out, made sure that I removed any of the wrinkles
and for this piece, because it was on paper, I went one section at a time so that I could glue
that down and spread it out so there weren't any wrinkles in there. Again, I'm going to make sure
that I get all of those outside edges mod podged down so that that nylon doesn't fray anymore
and that everything will be nice and sealed. After that dries, I can then simply reinsert
this back into the frame, put my backing on and now you have a beautifully framed American flag
that you can display all year long, not just for the holidays. I love how this piece turned out
and I hope you guys like it as well. Now, let's move on to our next project, which is project
number five. Starting with one of these mason jar signs from Dollar Tree, you're going to remove
all of that stuff that's on the front and let me tell you, it is a booger to get off. I heated it up,
I used my putty knife, I pulled all the stuff off, I scraped it with my fingernails,
I finally got most of it off. What I couldn't get off, I tried to sand. It's not going to be
completely smooth, but that's okay. It's going to become the backside. So I did give this two coats
of my Waverly White chalk paint. Again, the front is going to become the back because of all of that
stuff that wouldn't come off and the back will become the front. Using another one of those
napkins from Dollar Tree, we're going to cut the square off and then peel that apart and just use
the top portion of the napkin and then mod podge this onto the mason jar, making sure that I get
all of those edges and then I am also going to take a dry brush because this napkin is so thin
and very carefully go over this to get any of the wrinkles out and just try to get it as flat
as possible on this mason jar. I am also going to wrap one side with the napkin so that the red and
white stripes go around the right hand side of this mason jar and I'll do that the same way,
just pushing that down and taking that brush and really getting into those crevices so that that
design will really pop out after this dries and we can remove that excess napkin. I also will be
using this sign from Dollar Tree and I'm going to take that same Waverly White chalk paint and
this actually takes three coats on the top to cover that design up, but I also made sure that
I painted the outside edges because that was a little bit of a different colored white. We'll set
this to the side for just a moment and we're going to use some of these wood letters. I believe mine
came from Dollar General, but you can also find them at Walmart and I'm going to paint the S with
the Waverly White chalk paint and then I'm going to use Apple Barrel's Flag Red to paint the U
and I'm making sure that I get all of the outside edges because when you attach this to your piece
you want to make sure everything is covered on the outside. For the letter A, I am using
Waverly's chalk paint in the color Ocean and I'm going to let all of those dry. They only take one
coat. Now that my mason jar, the Mod Podge, has dried, I'm going to take my fine grit sandpaper
and go over all of those edges. Now this is the side that does not have the napkin wrapping around
it, so I just took my time and made sure that I got in between all of those creases and then I'll sand
all of the edging until it's nice and smooth. I decided to go ahead and cover this with the Mod
Podge just to seal that napkin in to make sure that it doesn't tear or rip. Now the red and the
blue was a little bit of a different color than the napkin and I wanted the lettering to match,
so I'm going to add just a hint of black chalk paint to this color to darken it up a little bit
so that it will match better with the red and blue in the napkin. And I'm going to do the exact
same thing for the A and I'm going to let all of that dry. I'm going to take a wet wipe and dab it
into my black paint because I don't want the S to blend in with the piece once we put all of this
together. I wanted it to stand out a little bit so I'm just going around the outside edging of this
letter. Now after all that paint dries, we can attach it to our, we can start attaching our pieces
together and I'm going to hot glue that mason jar down to the top of that Dollar Tree sign
more towards the front. Let that glue set up and then I'm going to take one of the drawer inserts
from Dollar Tree that comes in those little cubes. This is the inside portion and I'm going to paint
three of the outside edges as well as the top rim and then somewhat down inside of it so that you
would not see the wood. So I didn't worry about the side with the design or the bottom because
you're not going to see that. We're actually going to hot glue a styrofoam ball in there
and then we can take this piece and we're going to glue it to the back of our mason jar. So we're
going to take the side that has the design on it. It's going to go on the back side of our mason jar
and then the bottom is going to be glued to the bottom of our Dollar Tree sign and I just tried
to center that up behind the mason jar and this is where we can add our florals later on. Once
that glue sets up I'm going to add my lettering to the front and this is super cute just the way
it is. You could leave it just like this or not even add the box to the back but I did want to
add some florals to the back of that. I started off just by placing the middle letter so that
I would know how to place or how far apart to place my other two letters and then I can use
some of that Dollar Tree patriotic bouquet to add into the styrofoam balls and it just has this
gorgeous red and white stripes and then one that is blue with the white stars and for this piece
I used a lot of the red in the front and then I'm going to add some of the blue one of one piece in
the blue in the front and then a couple in the back but you can use whatever florals you want.
I just filled it up I think I did use a couple or maybe one extra red one from a second bundle
until it was nice and full and then I'm going to take some of this Dollar Tree Spanish moss
and add that to the top to cover up the styrofoam ball and this turned out to be so festive and so
pretty. I really do love how this project turned out and I hope you guys like it as well and now
moving on to project number six. Starting off with one of Dollar Tree's metal containers as
well as one of their styrofoam blocks. I'm just going to cut that in half and take one of those
half pieces and set that and I'm using a putty knife a plastic putty knife just to cut mine
down. I'll take that half piece and hot glue it right into the center of our metal bucket and
I'll take the other half I'm going to cut it in half and then cut that half piece in half so that
I have two smaller pieces to place on each side of our middle piece and I will hot glue those down
as well so that they'll all stay in place. After I have all of those in place I am going to take
some of Dollar Tree's white hydrangeas they're so pretty I think I used about three bundles
and I'm going to cut each one of those off each one of the stems off of the bundle and then I
push my greenery up a little bit so that you can see it and I'm going to start off by placing
these individual pieces all along the front side of the bucket and once I get that filled in I'm
going to add a few more behind it like a second layer and then I'm going to use this absolutely
adorable red garden stake the red truck from Dollar Tree and I'm going to hold it up to see
how high I want that to be above the flowers and then I'm taking my wire cutters and just
scoring it around and then I'm going to bend it and score it some more and just keep working with
it until I can break that in half and it didn't take long I mean it's not super thick if you had
some wire cutters it would work best but my little wire cutters wouldn't cut all the way
through that I'm going to add that into the center of the floral foam block that we placed in there
and then I'm going to add some more white flowers all the way around that until it's nice and full
on the back side and because that stakes a little bit wobbly I'm going to take some hot glue and add
that around the stake so that it'll give it a little bit more sturdiness and it'll hold it in
place then I am using some of Dollar Tree's really beautiful blue flowers they have like
the little beads at the top and then these cute blue flowers and I'm just filling this in until
I get it nice and full and I love how this turned out with the red white and blue it is so farmhouse
it is so festive and this would make a really beautiful centerpiece as well let me know what
you think of this project now project number seven we're going to start off with this it's
a picture frame from Dollar Tree it's more of a sign but it's it's made like a picture frame
I removed the insert the backing and then peeled off that flower and then I'm going to sand that
down till it's nice and smooth and my original plan when I started this was this was going to
remain the front so I took my Waverly White chalk paint and I painted over this entire piece
but after my second coat it had some bubbles in there and I really didn't like the way that looked
so I'm going to make this the back part of our sign and I'm going to make the back the front
part so I just removed the hanger that's on there and when you pull that up it will leave a few
little holes in there so I'm going to sand those down to get them nice and smooth and then I took
some spackling which I have some fast dry spackling and I spread that out and get a nice even coat on
there let that dry and then I could sand it down nice and smooth and I can give this two coats of
my Waverly White chalk paint and it gave it a much better finish it turned out so much nicer than all
those bubbles that were on the back side then I am going to take this and place it back into the
frame so that I'll know how to line everything up now I created a decal on my Cricut but I do always
have a free printable if I create anything with my Cricut I always try to provide a free printable
on my website which is in my description box below so that you can print that out and trace
it onto your project and I printed out God Bless America and I'm going to apply this decal to the
top part of the sign and then to decorate the bottom I am using that super cute blue garden
stake truck now this one I can just pop off right at the top and that's super easy you just bend it
up back and forth a couple of times and it will pop right off now I wanted it to set a little bit
offset of our frame so I'm adding some of the tumbling tower pieces now I do recommend that you
use e6000 I am using hot glue here but when I put mine together they did pop off and I did have to
go back in and add some e6000 to really hold that into place so after you get your glue on there I
actually just wanted to set it where the tires were right on the bottom of our picture frame
and now you have a gorgeous patriotic sign and I love how this one turned out it is so pretty
this just screams farmhouse to me and I just love it moving on to our last project for today which
is so simple starting off with some of these copper wire led lights that you could pick up
at Dollar Tree I originally thought I would need two but I only need one and then this real wood
and MDF palette sign from Family Dollar for five dollars now this sign is gorgeous just the way it
is but I wanted to give it a little something extra so I'm going to add these led lights to
the outside of it so after putting my batteries in there making sure the lights work because I
always like to make sure these lights work sometimes they don't always work from Dollar Tree
I'm going to pull that tight and then it will slide right under the palette and that piece on
the back you don't even have to glue it or tape it in place if you hold it tight enough it will
slide right under there and then you can go around the next corner and slide it under that piece and
it will stay in place I'm going to repeat this around the entire palette now this is a good
size palette it's actually 21 and a half inches by 13 and a half inches so that's a really nice
size for five dollars again I got this at Family Dollar when I get all the way around to the edge
now the blue portion that has the stars is a solid piece on the back so you can't see through that
I'm going to fold the wire down and take a little bit of hot glue now I have this set on low
just to hold that wire in that one little spot and then you're going to take the piece that has
your batteries on it now make sure that you keep that side up so you'll be able to change your
batteries later on I'm going to hot glue this to the back part and this is where the blue part is
so you can't see this pack from the front then it's just as simple as that turn your lights on
and it just really upped the game on this side and I think it turned out so pretty I love this
I think I'm going to put this on my covered porch you guys if you have a favorite as always I would
love to know which one is your favorite please let me know in the comments down below if you
enjoy today's video please make sure to give me a big thumbs up it really helps to support my channel
thank you so very much for watching I truly do appreciate each and every one of you
please take care and I will see you guys next time
