OLR Relay Interview Questions and Answers | Overload Relay Explained
Video Description: In this video, we will discuss the most important Overload Relay (OLR) interview questions and answers that are commonly asked in electrical and industrial automation job interviews.
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
📚 Welcome to Electrical Technician Training - Learn Anytime, Anywhere! अब हर एक इलेक्ट्रीशियन बनेगा इंजीनियर!
🔧 Electrical Wiring Master Course 👉 Become an expert in wiring, troubleshooting, and modifications 👉 Perfect for electricians aiming to advance their career 💡 Price: ₹499 https://electricaltechnician.akamai.net.in/new-courses/7
📑 How to Read Electrical Drawings Course 👉 Learn to read and understand ACB VCB And other electrical panel diagrams 👉 Master circuit troubleshooting with ease 👉 A must-have course for all electrical professionals 💡 Price: ₹999 https://electricaltechnician.akamai.net.in/new-courses/3
⚙ VFD Programming and Troubleshooting Course 👉 Master Variable Frequency Drive (VFD) programming and installation 👉 Stay ahead with the latest VFD troubleshooting techniques 💡 Price: ₹999 https://electricaltechnician.akamai.net.in/new-courses/1
🔍 Advanced Siemens PLC & HMI Programming Course 👉 PLC Wiring 👉 Basic and Advanced Programming 👉 Analog Programming 👉 Encoder and High-Speed Programming 👉 Modbus Communication 👉 Run VFD with PLC 👉 Siemens HMI Programming 💡 Price: ₹1000 https://electricaltechnician.akamai.net.in/new-courses/12
💻 SCADA Programming and Designing Course 👉 Master SCADA systems for industrial automation 👉 Learn to design, program, and troubleshoot SCADA interfaces 👉 Perfect for professionals aiming to excel in automation design 💡 Price: ₹600 https://electricaltechnician.akamai.net.in/new-courses/13
Friends, before starting the video,
I will ask you an interview question and I
guarantee that
you will give 100% wrong answer to this question, even if you have 10
years of work experience,
you are still going to give the wrong answer. The question here is that
I have an overall
relay here, I have
connected all three power supplies of RYB directly to the incoming terminal of this overall relay and by
taking the power supply directly from this overall relay, I have connected it to my
motor here,
now if current is flowing from here, then
my motor will keep on running, but if due to
some reason more current starts flowing from here
and
after starting, our overall
relay has tripped, now the question here is
that even after the overall relay trips, will our motor
here
remain on or off, this is a very
important interview question,
even for a person with good experience, If you have to fail then
if you know the answer to this question then go and
comment in the comment box and tell me, I will see
how many people passed this interview question
and how many people failed here,
I hope that you people must have
commented, after commenting,
I will directly tell you the answer here,
see the answer here is that
even after our over relay trips, our motor will
remain on, our motor will not turn off, now here you will
think how the over relay has tripped,
why is the motor on even after tripping, I will
explain it to you in full detail through this video, do not
skip the video because you are going to
learn a lot, okay, so
here I told you that I have given three phase
power supply to this over
relay, then from the over relay I have
given power supply directly to the motor, now
friends here you should know one thing that
our over relay has
a biometric strip inside it,
as you will see
A bimetal strip of this type is fitted. A
bimetal strip is nothing but
two different metals.
Current flows through those metals and if
more current starts flowing due to the flow of current, then
in this condition the metal gets bent
and because of bending its
contact will open.
Now here it will be said that sir the contact is opening, so
how is the power supply
going forward here, why is the power
supply not getting closed here, so see the reason behind this is that the
over relay here, in this
circuit band
contact which is opening here, that contact is only
its AO NC contact here, as if
I show you, if you see in this over relay,
here you will find
terminal number 9596 and terminal number 9798,
so when the over relay trips, then
after tripping the contact which
changes here is only the
NC contact here and here The N
contact on it will only change, rest of its
power supply circuit, like this
supply circuit, there will be no change in this supply
circuit,
meaning it will always keep on giving power supply,
whether our over relay trips or not. So
you should always pay attention to this thing,
now whatever I told you,
I will prove it to you, see the
image here, in this image you will see the symbol of the
over relay and the relay, that symbol has been
made and in this symbol you will see the
power circuit here,
what happens in the power circuit t1 t2 t3, like the power
supply r phase has been connected here,
y phase here and b phase here,
so in this condition, you will see from here that the power supply is
going directly, is the
option of opening the switch in the middle
shown here, is it not shown, no
option has been given here in the symbol
that our contact will be
open, so from here also we
can understand that the power supply will flow forward,
apart from this you can see here Look at the
terminal number 95 and 97 of the overall relay, a
moving contact has been made here, this is our
moving contact through which this
circuit will close and open here, this circuit
will close here and then it will open,
okay, so this contact has a moving
contact due to which it is
also shown in the symbol here, but the
power circuit of this oval relay does
not have any kind of moving contact
through which the power supply can be broken here,
okay, so at the present time we have understood
that there is no change in the power terminal,
it will
always flow the power supply and the
tripping that happens here, that tripping will
happen only through AO NC contact, now
friends here you will think that how our
motor gets turned off through the over relay, so
see, to turn it off,
what do you have to do here, the
wiring that you will do, you will have to use the NC contact of the over relay in that wiring,
friends, before moving forward I
would like to tell you that my There is a
lot of electrical training available for you people, by doing which
you
can increase your knowledge to a great extent, like I have a
PLC course here, the
course of Siemens company's BFD is
available with me.
Apart from this, if you
want to learn about BFD of three different companies, then
its course is also available. If you want to
learn only about Delta company's BFD, then
its course is also available.
Our BFD course, in this course,
you are not only taught normal wiring and programming,
in this we will teach you
complete wiring
programming trouble shooting at industrial level, apart from this,
how to run BFD through our PLC, there is an
inbuilt PLC inside BFD, how to
program it, we have
given you the explanation of every thing in complete detail.
Apart from this, if you want to learn to read drawings
through recorded videos
or through live classes, if you
want to read drawings, then live classes are
also going on right now, by joining that class, you
can learn to read drawings very well.
Apart from this, if If you want to learn both RLC plus PLC, then
its course is also
available. If you have just passed out from college
and you do not have any knowledge about
what work is done in the industry and how it is done, then
this course is for you, which is
our motor starter
course, whose fee is only ₹ 3300, in which
you will get such a good knowledge about D
starter star delta reverse forward,
so that the electricians who
work in the industry or the
knowledge that you get after working in the industry for one or two years, you will get that much knowledge
through this course.
Apart from this, if you
want to learn electrical wiring, then you can join our master course.
I have given the link of all these courses
in the description of the video, from there you
can join our courses and gain a lot of knowledge. Now let us
continue our video,
how our motor stops, let
me explain it to you practically,
see now At the time of this I have done power
wiring here. What has happened in power wiring is that
incoming power supply has been given to MCB.
Through MCB, power is being supplied to power
contractor and then through contractor,
power is being supplied to overload and motor through overload relay.
Apart from this,
I have kept neutral supply of this overload relay
directly connected here. Now, to
start and stop this contractor,
I have to give phase supply to this a1 terminal. So,
from where do we give phase supply?
Here we have RYB
power supply of all three phases. We can
use power supply of one phase from any of these three. So,
what do I do here? I
brought the B phase power supply
and connected the power supply to the terminal number 95 of the overall relay.
Then I took a wire from it to the terminal number 96
and gave power to the stop push button.
Then the power supply from the stop push button will go to
start. And now,
taking a wire from the output terminal of this start push button, connect it to the
a1 terminal of this contractor.
Now
we have to hold this contactor as well, so
what do we do to hold it, loop
a wire from the ANO contact here and
through this ANO contact, that means we connect a wire with the output of the start push button
and the input of this star push button is
also connected here through the ANO contact, that
means from here the wire
went to this side and from this place the wire went to
this side here, that means
we have made the connection in parallel to the start push button in this way,
now
what will happen after making this much connection, when our contactor here is
turned on, then in this condition the
motor will start and to turn on the contactor, we will
press the start push button, as soon as we press the start push button,
our
contactor will start, now
after it is turned on, you will see that the power supply, the
phase supply, will come from here and will go to this
through the stop button of the NC contact, then
in the start button, press it here and
release it, then the power The supply will
reach this place passing through here, meaning that the
motor will keep running. Now if the current is detected through this over relay and
more current starts flowing, then
in this condition the
power supply that was flowing forward through the NC contact here,
that power supply will be cut here, due to
which no power supply will flow in this circuit, due to which
our contactor will be closed
and power will not go further due to the closing of the contactor and
here our motor will be
off. So through today's video you have
learned that the power circuit of the over relay does
not undergo any change, only its N/C
contact undergoes changes and
through that the power supply is turned off,
meaning that the contactor is turned off
due to which our motor turns off,
okay friends.