OLR Relay को सही तरीके Use करना सीखे | Overload Relay @ElectricalTechnician

Electrical Technician
42 followers
14 Video Views·Dec 1, 2024
Friends, through this video today I am
going to tell you that in our over
and relay, you must have seen that when the
over and relay trips, sometimes
our over relay gets reset automatically,
now why does it reset automatically
What is the reason behind this and if this happens then
what will you have to do, I am
going to tell you that in full detail in this video,
along with this there are many other concepts of overall relay,
that concept is explained in
full in this video So I am going to cover this,
Hello friends, I am Arun Gupta, I
welcome all of you to
this
youtube1 delay of electrical technician, we use it
to protect the motor from overload,
now you must know the connection of overload delay,
still I will tell you a little bit
so that your concept
or the new students who do not
know how to do the wiring of the overall relay can
also know this. See, in the overall relay,
you will see that there are three in this way The
pin comes out, we have to connect these three pins
with the contactor
but now At the time of K, understand that this
pin has to be connected with the R phase,
this one with the Y phase and
this one with the B phase of the power supply.
If we connect the three-phase power
supply to this overall relay If we connect them together
then the output terminal of the overall relay
such as t1 t2 and t3,
we will get power supply from these terminals which
we have to take and connect with the motor, so
if you connect the power supply of the R phase here, then
this From the terminal
here you will get the power supply for R phase and
if you want to supply power for Y phase here then
you will get the power supply for Va phase from this place
and if you
want to supply power for B phase here then you will get it from here You will
get the B phase power supply. Okay,
you must have understood so many things here.
Now friends, the input terminal in the overall and relay is
like this is the input terminal
and after this there is the output terminal here,
apart from these two terminals. You
get four more terminals here, as you can see
here terminal number 95 and terminal number 96
Terminal number 97 and terminal number 98 will be
found here. Now here
you have to understand where to use Ano Contact, NC
Contact.
Look here, this contactor
in this contactor, here is the Ano contact of
Ano Contact. If we use it
to make any indication lamp glow, then
in this condition
this contact will be used to turn on the
indication lamp, but
below this contactor there is an NC
contact, you will see here NC
contact And below this there will also be
an NC point here, so these two points,
this one and this one, both these points are
for our off, that is,
if you want to show the off condition, if
you want to connect the indicator, then In this condition,
this terminal will work for you
for turning off and you will use the Ano contact for turning
on. I will tell you again in writing
what the Ano contact is for.
We use it
for on indication lamp and NC contact
which is there, we use NC contact
for off indicator, okay,
you must have understood these many things now
friends, here we have oval relay
in this oval relay There is a little difference here,
see the job of the overall relay is to
provide protection and the
protection is of over
current, now think here that
if the overall relay
remains in normal condition In that condition we have to
keep the contractor on and as soon as
our over relay trips,
we have to close the contractor, so
what do we do for this, the
NC contact of the over relay, which is the NC contact
So its terminal number 95 and
terminal number 96 is its
NC contact.
This NC contact is needed to use this NC contact
in the control circuit. So I will
write control here, okay?
In the control circuit you will have to use NC contact,
I will tell you how to do it,
suppose you are making a dual starter,
then what will you do there, you will have
a contactor like this in
which there is a1 terminal here and
a2 terminal here You have to give phase supply on a1 terminal.
For phase supply,
I write p here. Now, whatever will be the phase supply,
first of all we take it to the
NC contact of this overall relay,
this NC contact is there, so this
NC We will connect the contact here so in
this way we can make the symbol,
this is the NC contact oval of LR
and we call relay as Oval so I have
written Oval R here, okay so this is
our oval and relay NC contact then
from this the power supply goes to our stop push button
then from here the power supply
goes to our start push button then from there the
power supply will go to the a1 terminal of the contactor,
to hold this contactor we
make a holding circuit here which is
our contractor's anno There is a contact,
which means that the ANO contact of this contractor will
be here, I write N here,
then we
also have to give neutral supply to this contractor, so I
connect the neutral supply here directly like this, so
which diagram is this of ours So this
is the diagram of dual starter and we can call this diagram
control circuit so
in the control circuit you have to use oval and NC contact of relay
okay you must have understood these many things
now look here Which is an ano contact,
we use this ano contact
to make any type of indicator glow, now which type of indicator
will glow, see here the overal and delay,
when will it operate, when it is over, that means
that the overal When the relay trips, we need to make
an indicator glow. So,
for this, we will have to use Ano contact here
and the
indicator light that we will connect with Ano contact,
we will turn on that indicator light. It will be called
trip indicator, which means that
this indicator light will glow in trip condition. Now to explain how it glows,
let me tell you that this
ANO contact will now convert to NC when the
overall relay trips here. After
this, when will this NC contact open?
When your overall relay trips, meaning that the
contractor here, when you
turn on this contact, the ANO
contact closes and the NC contact
opens. I write it here.
If our contractor remains off, then
in this condition the ANO contact will remain N and the NC
contact will remain NC here, but
as soon as we turn on the contractor, the
N contact in this condition will be
closed and after this whatever
We have an NC contact which
gets open meaning that if we
put power supply on the N contact here, then we put
phase supply here and
I connected a light with its output. In
this way if the neutral supply is
provided here then if the contractor here
remains closed then this light of ours will always
remain off but as soon as I turn the contactor
on here then in this condition this
light will remain off This light of ours will glow,
okay, but on the contrary, we have
over and relay here, in over and relay,
turning it on and off does not make any difference, I
mean if you turn the contactor on and off,
nothing will happen, but our over And there is a
relay, it is a little bit opposite
like suppose here is the oval and relay,
this oval and relay, here I will
show you this ano contact,
with this ano contact, I have shown the
phase supply here I connected it and through this
I have connected a light here and
given it neutral supply here.
Now this light of ours will
never glow but as soon as our
overall and relay here is connected, The relay trips, as
soon as it trips,
this light of ours It will glow,
why will it glow because this
ano contact of ours will
close immediately, when will it close when the
over and relay here, this over and
relay of ours trips, then in the trip condition
its contact here The
contact changes. Okay,
you must have understood this much. So here you have to
understand that we use NC quantizer
in the control circuit and
we use our ANO contact
to make a trip indicator. This is
done to make a trip indicator. Okay,
now if you see in this overall relay, a
stop button is given here. In this overall relay, a
stop button is given here. Now,
when will this stop button be activated? It is useful, see, if your
motor is in running condition and in this condition you
want to turn off the motor, that too by
using the overall relay, then simply
press this stop button, on pressing it This is
your NC contact here It will open, which
means that the
power supply will always flow from this contact to here,
because of which the
contactor installed here will
always remain on, but as soon as
you press it, this contactor
This contactor of yours will
go into off condition, which means it will close,
why will it close because what
this contact will do is, when you
press it here, it will open in this way
and because of opening this point
Power supply: If you have connected the phase supply here, then the
power
supply will not be able to go here, due to which
it will get turned off. Again, when you
release it, then this power supply will
directly go to this point, okay?
Understand the function of the stop button.
After this, there is a reset button. The
function of the reset button is to reset the overall relay.
If your overall relay trips,
then in this condition you will
have to press this reset button. As soon as you press it the
overall relay will be reset,
in the beginning I told you He said that sometimes
our overall delay gets reset automatically,
why does that happen? So let me tell you,
here in the overall delay, you will
see that there is a knob like this attached to it,
okay, this knob is also our
reset knob. If you press it, it will
reset. At present,
you will see that this button is on the inside,
if it remains on the inside, then
our overall relay will automatically reset. Let
me show it to you practically.
As you can see here there
is a reset button in the overload delay. We reset it by pressing this button.
Suppose your overload relay has
tripped, then in that condition
we will have to press this button.
To reset, now if you want that the overall relay
gets reset automatically as soon as the current gets
reduced or
stops, then in this condition what you have to do is,
this button is there, you have to press this button You have to
press here and rotate it a little,
like Let me show you, I press it here
and rotate it a little like this,
now you will see this button
remains inside, now if this button
is on the inside then in this condition the overall delay is
there, this overall delay Our delay gets reset automatically.
Now this
overall delay of Schneider company, in this overall delay also you
get the option of auto reset. If your overall
relay is in normal condition, then to reset it in this condition
you have to enter this reset option here. There is a
white colored button, you
have to press it but if you want it
to be automatically reset, then for this
you will see here an A is written and
here H is written, A means auto
and H means hand Meaning that you have to
reset it manually. Currently, if I
move it from here, you will see that it is
downwards, meaning it will reset in auto.
If I move it upwards,
it will reset automatically. So, this knob
no that means there is a switch this switch We have to make a
change here, if it is on the top
then it will be reset manually, it always
remains in manual condition, but if you
want the oval and relay to be reset automatically, then
for this you will have to
switch it by sliding it downwards.
Okay, you must have understood these many things
now friends here we have our overall
relay, in this overall relay you will see there
is a knob given here, this knob, if you
look in it then here is this knob, okay
this knob We use it
to set the current, see this
is the most important point, the overall relay that you have,
how much amperes of current flows through that overall relay,
in that condition you want it to
trip, you will have to set it
and for setting For this, a knob has been
given here, now if you look at this knob, the
current is written here, as you will
see here it is 37 and here it is 50, now
here you tell that this overall relay, the
range of this overall and relay what happened i
know you have the answer Do you know,
you can tell me by commenting in the comment box without
playing the video further, I hope
you have commented, let me
tell you the answer, see this
overall relay, the range of this overall relay
is 37 amperes From 37 to 50 ampere
means that if you want to tell the range of this particular OO
relay or tell the current rating
then you will say that this over relay of ours
is of 37 to 50 ampere, we can say 37 to 50 ampere,
see if you see here But if you
want to set this overall relay,
how much amperes of current do you
want to flow, then for this you
will simply rotate this knob and after rotating you
will see that there is a pointer attached, you will have to
bring it in front of this pointer like That right now
there is 37 in front of it, so in this overall
relay, a current of 37 amperes has been set at this time
or if we
rotate this tip here and bring 50 amperes
here, then if here If 50 amperes are
shown on the relay then we will say that a current of 50 amperes has been
set.
Similarly, in this overall relay
you will see that a range of 2.5 to 4 amperes has been
given. This means that we can only set the current from 2.5
amperes to 4 amperes. By taking this we can set the current rating of 4 amperes.
Now if you want to
set 3 amperes here, then what will you do,
here it is written three, you will take this
knob in front of it by rotating it, that
means you will turn it That you will take it
here, if you bring it in front of this point then
in this condition
3 amperes current will be set in this over relay, okay
so you must have come to know so many things here,
now friends here we talk
about this Our overall relay, in this overall relay,
test is written here, it is
also written in this and nothing is written here
but something is written here, now
what does it mean, see if you have an
over relay You want to test
that If the overall relay is working or not,
then in this condition you
can use the test option given here, it is clearly visible in the overall relay, so
look here, it is written 'Test' in it. There is a
switch here which we have to slide.
Okay, let me
show you practically here. If you
want to check the over relay whether it is working or
bad, then in this condition you will have to
take a multimeter. You have to
put it on continuity, then what you have
to do is connect both the probes of the multimeter
with ANO contact
or you can also connect it with NC contact,
in most of the conditions we
use NC contact
in the circuit, so NC
Connect the multimeter with the contact, there will be a beep
sound but when you test here,
the beep sound will go away
as I show you here,
this test button is how I will
operate it beep sound here It will go away in
this way, I am fine here,
like I operated here, see the
beep sound went away, it will come
back on releasing, on operating again the beep
sound will go away, so if your overall delay is
in test condition, there is a beep here If it
stops giving the sound, then understand that the overall relay is working
fine. Similarly, to
check the overall relay of Schneider, a
test button has been provided here. You can slide it to
check that the overall relay is
tripping properly. Is it happening or not,
now friends, just like the overall relay,
you will also find MPCB at some places,
now
before telling what is MPCB, friends I
would like to tell you that if you want to take electrical training from us,
that too For this,
we have a course available for you online,
like we have a
course for electrical drawing, if you do
not know how to read the drawing of an electrical panel,
whether it is of an ACP breaker, LT
panel or ST panel.
If there is a drawing of BCP breaker and you do not know how to read it
then how to read electrical
You
can learn to read electrical drawings properly by joining a panel drawing course. Apart from this, we also have a
motor starter course where you are
taught practically about dual starter, reverse, forward starter, start, delta starter.
You can gain a lot of knowledge by joining this course and
if you want to learn electrical wiring, if you
want to learn BFD programming, apart from this,
if you want to learn PLC programming,
we have a course
available for this as well. If you
want to learn SCADA programming and designing, then
we have recently launched its course.
Apart from this, if you want to buy our book
Electrician A to Z Wiring Book,
then you can buy the PDF of this book. The
link has been
provided to you in the description of this video,
from there you
can directly buy the book and download this book
or our course, all these courses,
our app is Electrical Technician app
which you can get on
st8
You can contact me on this mobile number 1989 0466 You
can contact me and talk to me directly. This is my personal mobile number. You can
talk to me directly on this number. Okay,
now let us understand here that
how our MPCB works
with our over and relay. It is
similar, see friends, the work of ovl and relay
is to protect the motor,
that is to protect it from over current and short circuit, in the
same way
our MPCB also
provides protection here, that is
only for the motor It is designed,
we call this device MPCB.
Now
in MPCB, you will find an on
button to turn it on and an off button to turn it off.
If you want to turn off any load through MPCB, If you want to
turn it on and off then for this
you simply press the start button here and
your MPC will also start,
well here you have to understand one thing
which is our overall relay,
if the power is on that overall relay here supply
is connected then that power supply will
always flow from here even if your over or
relay trips Even if it is in condition
your relay gets over and tripped, then
whatever power supply is connected on this terminal,
that power supply will
always flow from here, but
its NO NC contact here is N NC. The
contact only gets changed here,
what will happen is that the NC contact
will open and our ANO contact gets closed
but
in MPCB, there is an option here in that MPCB, to
turn it on or off means that you here You will
connect the three phase power supply, the
power supply of R phase, the power supply of Y phase and the
power supply of B phase, if you connect them
and after connecting, if you connect
any motor here, there is a motor here,
this motor If you connect it with the output terminal, then
in this condition your
motor will remain in pay off condition, if you
want to start it then
you will
have to press the start button here, after pressing it, it will start working
Your motor will start, if you want to stop it then
simply press the stop button here.
Press here and your motor will turn off.
Apart from this, if you
want to set the current in this NPCB, then
for this you will get a knob here,
through which you can set the current.
Along with this, here you will also find A test
button is found, just like there is a
test button in your overall and relay,
similarly there is a test button here as well,
by sliding that test button you
can check it here as well, so in MPCB
you will find Everything is
available in your overall relay, so I
hope you liked today's class,
friends, if
you liked the class, then please like the video
and if you have not yet subscribed to our channel, If you have
not subscribed then please subscribe. I
end this video here.
Thank you very much for watching this video.
