Arizona's autonomous home- entirely off-grid, no hookups needed.

Nature house
148 followers
#NaturalHouse, #EcoHome, #SustainableLiving, #GreenArchitecture, #EcoFriendlyHome, #OrganicLiving, #NaturalLiving, #EarthFriendly, #EcoDesign, #HealthyHome, #GreenLiving, #SustainableHome, #NatureInspired, #EcoHouse, #EnvironmentallyFriendly
These are the spark boxes.
It's a one bedroom, one bath that drops into your backyard,
sets up in four hours, and is completely off grid.
There's 12,000 watts of panels on the roof, of solar panels.
There's 1,250 gallons of water storage,
and 330 gallons of gray water
that you can use for landscaping.
So it needs no utility connections at all.
So the idea is that if you drop this into your backyard,
and the 1,250 gallons is based on one person for two months,
or two people for a month.
And so that, to me, seemed like a very easy solution to,
I'm gonna fill that with my hose,
then trenching my yard, putting in a new water service,
and bringing out to it.
Okay, so these are the spark boxes.
So this, let's, here, let's go inside and I'll show you.
So when this dropped into your backyard,
it has full service, so you don't need to set up
an electrical service in order to live in it.
Your main bedroom space here,
you have a kitchenette with a refrigerator,
and then the bathroom here.
Everything here is being run off of battery and solar.
This is our smaller, our smaller bathroom.
This is the Cinderella,
which is an amazing incinerating toilet.
We tested it for many months inside of our factory
to see what the smell was like,
that I didn't want a composting toilet.
So the only difference is, is you have to use this liner,
which I call the coffee filter.
And so this goes in, and that's it.
And then, because that keeps it clean.
Right, if you don't use that, it's a mess.
And that goes down, and then it all gets burnt.
And is smoldered, yeah.
Every 100 flushes, you empty out the ashtray,
depending on how much you eat.
The ashtray, where's the ashtray?
So the ashtray is here.
Because it's similar to, I've taken ashtray, I guess.
It's literally, you pull it out,
and it's literally gray ash.
This is the ashtray, so you can see it pulls out from below.
It saves 2,000 gallons of water per person per year,
so there's no water connection at all.
The idea that you're burning up all your waste,
is that a lot of energy?
I mean, you really can stay off-grid and manage that?
So it does use 2,000 watts,
and it depends on how much you are burning.
If you're going to push the flush button,
because it's an electric toilet, 14 times,
and if it burns for an hour,
obviously you're gonna be using a lot of energy.
In this particular unit,
we have 25 kilowatt hour of battery storage.
You're gonna use two kilowatt hours
every time you flush the toilet.
Which during the day is not an issue,
but if you have 30 kilowatt hours at night,
and you had something that didn't sit well,
you really don't want to flush the toilet 15 times.
But you can leave it there.
You can leave it.
And it won't smell, because it gets trapped underneath.
Okay. You can leave it.
You can wait and do it in the day.
And here you see the layout that they're staggered.
Yes.
So there's the same hole in the back then?
So we have a 20 foot segment in front,
and a 30 foot segment in back.
What's driving that is to have enough
water storage in the back.
So this is our tank room.
So this is what it comes with.
This is how many gallons of water?
So this is 1,250 gallons in the back.
Okay.
This is your gray water tank, right here,
which is 330 gallons.
And you have 1,250 gallons in the back.
And so that comes through,
when you fill that with your hose,
it comes through this UV light filter,
and through the 50 to five micron filter.
This is your expansion tank for pressure.
And then it's pumped into the unit.
This is your water heater,
which is a eight gallon water heater.
I call it a sustainable shower.
So this water comes empty,
and then you just plug in a hose or?
This is where the water goes in and out.
So this is a quick release, right here.
So this is how you fill it.
You attach your hose to this,
and it locks in place.
And then you can have water in and water out.
So if I need water in the yard,
and I need some pressure on a hose,
I can connect my hose to the outside of this.
And now I have a hose to use in the yard, if I want.
That could be gray water too?
So the gray water comes out the nozzle over here,
which I'll show you.
This on the floor right here is a grease interceptor.
That comes from the kitchen.
That goes through to the gray water.
So it cleans anything from the kitchen area.
If there is some sort of fat that gets in there, or oil,
it will go through that before it goes through this filter.
On the way out, it goes through another 55 micron filter.
So this is gonna remove all the hair and soap
and everything from the shower and sinks
before it goes into your gray water tank.
And then this allows you to let it
either drain into the landscape,
or there's a valve underneath here,
which you can hook up another system
to your irrigation system.
So you can use that 330 gallons.
So you're not wasting any of the water
that you're using here.
Could even have a timer for a spring clean
or whatever it is.
Exactly.
So when you think about it, there's no black water created
because the toilet is incinerating.
The two sinks that we have in the shower
all pump into here.
And so we basically have created a sustainable RV
that doesn't go anywhere, that's permitted.
It's almost hard to explain how the adoption
of something like this is so different for people.
Like to understand that in one day,
this could be in your backyard in one day.
And people who have been through a construction process
understand that a little bit more.
Do you have these models built in factory?
Can they be transported the way they are like finished?
Yes, we just put this here two weeks ago.
So no cracks, no...
I mean, everything is panelized
so that it's designed to move.
This panel that you can see is loose here.
This is what goes on once we drop it
at what they call the marriage line
to join the two units together.
So it's designed for a backyard.
So technically, we just passed the ADU legislation
here in Phoenix.
Cooking is what makes it a dwelling unit.
So when these were created,
we had not passed the ADU legislation.
And so there is no cooking.
There is a dedicated circuit
for any type of small appliance.
The details matter and how materials come together matter.
From a manufacturing standpoint,
the gaps and things are there so that there is some movement.
So when it is shipped,
we're not dealing with a bunch of cracking.
The clean way I felt to do the electrical recept
is to put it in the base like that.
And so I think anywhere that the material comes together,
this actually is a light shaft here down the center.
And so we use that as an opportunity as a feature
versus just where the unit comes together.
And then again here, this is the return air.
This is a ducted mini split.
Did you get that?
And all your return air comes through here
and you supply out the Saho vents.
And they allow you to really diffuse down
the amount of air and direct.
And so it's a really good feature.
Say you're in bed and you wanna have more air
in a specific direction.
This, if you want the Murphy bed or if you want a bed
that it turns into a sofa and Murphy bed,
and all of your services are back
in these service doors here.
And so we have our ducted mini split here
and then our battery storage,
which this is showing 25 kilowatt hours of battery.
And the expense of putting in this much solar, is it?
The batteries are probably the most expensive part of it.
Solar panels are such a commodity now,
it's really not driving the price.
But you have to compare it to what it would cost
to install it all from an electrical standpoint
in your backyard.
What it means to have contractors in your backyard
all the time, dealing with an architect,
getting the permits versus one day of us bringing this in
and setting it down.
Because if it's off grid, it changes the permitting process?
No, it doesn't change the permitting process,
but because this is a prefab factory built building,
the drawings are already approved.
If you're gonna build an ADU in your backyard ground up,
that's a much longer process,
you're tying into your electric.
And so when you think about from a pricing standpoint,
you don't ever have another electric bill here.
These two are early prototypes.
This was before we actually extended the solar panels
off of the top.
So when a container shows up on the truck,
there's no room to pick it up with forks.
And we don't buy boxes with fork pockets
because it takes the structural capacity
out of that box quite a bit.
And so in Phoenix to get what's called a reach stacker,
which is what you see in the ports
that pick them up from the top,
would be about a half a million dollars.
And so we built this jig, which goes over the container,
these chains in the corners attach to each end,
and then we lift the box.
That's Mad Max grade type of.
When you're innovating on a small budget,
it's a really great solution.
So the container's picked up with that forklift,
and it's brought over onto this rail.
Right now the rail is wrapped for foaming.
So when we spray foam underneath the container,
it's put on this rail.
The container gets on, puts on here,
and then it rolls inside for manufacturing.
Slightly different texture.
These are the casters that we created
for the containers to roll on.
So each one of these, you can see the container
fits on the end of here and allows it to roll.
So the container comes in,
it gets locked in at this point with that jig
so that it's in the same place every time.
And then it gets cut by the robot.
We pulled this robot out of Mercedes in Detroit
and then repurposed it to cut the shipping containers.
Cutting the containers is really hard work,
and the containers are in tension,
so it pinches your blade.
And this ability with a large 14-inch blade
allows you to, boxes can move.
If it pinches the blade,
then there's a torque sensor that allows it to know
that, hey, I'm getting pinched,
pulls out of the container,
and then goes back into the code
and goes back into the program based on what we've drawn.
There's gonna be another robot
and that's gonna sandblast.
So the container will be on a chain system
and it will index to each location.
The robot will sandblast the paint off
and then it will move again to the next location.
From a manufacturing standpoint,
this is a really great way to do that
and will cost a third of what it costs for me
to have someone out here to sandblast it.
So what happens is that carrier comes down
and you take this tool
and the container sits on the end of here.
The corner nodes sit on here.
And this allows us to basically turn the direction
in order for it to change direction.
So this way would be going from the...
Right, so I turn this.
So now if we come from the robot,
now this would be coming this direction from the robot.
It would come down and the container's on here.
And then I would turn it like this.
Now we can go this way.
Right, so it's very...
And send it out to be shipped out.
And then we can, well,
then it goes down to the other side of the robot
so we can cut the other side of the container.
And so it's a really simple system
that allows us to just turn that node.
Because you're trying to get really,
you're trying to get things at scale.
Yeah, I'm trying to make it as efficient as possible
so that we can bring costs down overall.
By going with a lean manufacturing process,
we're able to increase the amount of output dramatically.
We'll easily be able to double what we can produce
by doing that.
So this is where all of the wall panels are cut
on the CNC machine.
This gives us the ability to not wait on a shop
to deliver those wall panels.
But it's really important
that we're able to control the flow here on site
with as many things as possible.
One of the things that was holding us up is the spray foam.
And so we decided to bite the bullet
and go and do the spray foaming on site.
Wow, so you're really doing all the verticals.
We're trying to.
We're pretty close to everything.
One thing you can take note here is
these are freshly sandblasted.
And you need to do that?
Is there a reason?
Well, that's the only way it will rust.
It's the only way it will patina.
Yeah, you see that they're rusted already.
That just starts to happen, no?
Yeah, we don't apply anything to it.
Yeah, it just does this.
It's mother nature.
And so this is one of my favorite parts.
This is a hot rolled steel panel.
And these marks on here are from the milling process.
So when it comes through that furnace and is rolled,
you get the remnants of that heat.
And so you can really see the processes of it being made.
And now we've put it here
and put a sealer on it as the backsplash,
which I just love.
Here's another burn mark,
like this burn mark here with a little bit of color in it.
You can kind of see the clip system here.
So this panel, so when these come together,
we foam the gap,
and then this panel goes and clips on.
If you see the backside of this,
one's male and one's female,
and it clips on.
And so it allows us to have a great system
without fasteners being seen.
But the really challenging part of this
is that you can see these are epoxied in,
and this location is really important
to align with the other side of it.
And so this has to be CNC'd,
and the hole where that side goes has to be CNC'd.
And so you can see here from a production standpoint,
this panel is PB,
and here's the arrow that goes up.
And so all of that is CNC'd into the panel for production.
Because we're manufacturing these,
we have a decal that is put on the box
from the state.
And that serial number is registered
with the state as a box,
which provides the wind load and snow load of the box.
So the intent there is that you have
a way to track that product.
So if somebody buys this and wants to take it to Colorado,
snow load requirements in Colorado
are different than they are in Arizona.
So we have to have a serial number that goes with it.
So this is J, and this is PB.
PB and J.
This unit here,
we are creating office space to go in your backyard.
This is a 20 foot container.
It comes with a beverage fridge and cabinetry.
I was thinking that if you're gonna use this as an office,
it would be nice to just include a beverage fridge
and some storage on top of that.
And so then we've provided a plug and USB,
and USB-C in the back.
So it's all integrated.
And the idea here is that these panels
all have a CNC file, right?
So they all get cut on the CNC machine.
And you know, panel A always goes here,
and panel B always goes here.
And so it allows you to produce this in a much faster way.
All of the utilities is integrated.
So your air is coming out of here from the heat pump,
and then your return air is here through this side.
Drops down the wall,
into the mechanical closet, and then back through.
And so it's a really nice clean detail,
instead of having a mini split cassette hanging on the wall.
So despite the amount of glass you have here,
and the dimensions, and the fact that the encasing is metal,
is this Arizona proof?
Oh yeah.
It's phenomenally efficient.
Even solar glass, right?
Yes.
So this is a SolarBand 70XL.
You know, it does a great job,
especially in the summer when our sun is at 80 degrees.
This, the solar panels that overhang shade the glass.
And how much do you worry?
I mean, it's a shipping container.
So it's metal.
People always talk about like,
oh, it's gonna get hot.
Right.
The steel container gets hot,
but it releases that heat very quickly.
And that's one of the things we always deal with in Arizona,
is that latent heat or the heat island effect.
And actually having a concrete tile roof,
and all of the pavement in our city,
is really adding to that heat island effect,
where steel will conduct heat very quickly,
releases it very quickly.
The heat is on in here.
Heat.
Because we've been running some tests.
One of the really interesting tests that we did last winter,
was we set it to 88 degrees.
We left the windows and doors open,
and it was using about 3000 Watts.
We closed the doors and windows,
and it was 45 degrees outside.
All night long, it was 400 Watts of use,
and it was 88 degrees inside the unit.
So it's really amazing.
I don't know if you wanna see the behind the scenes
on this one.
This was a much tougher to integrate.
It takes a lot of work to get a small space
to be off grid, right?
Our two lithium batteries here.
Right now we're using 268 Watts,
and we're bringing in 1,289 Watts.
So one kilowatt we're bringing in,
and our batteries are at 85% right now.
So you're looking good, basically.
Yeah, so by the time the sun sets,
we'll be no problem, be covered.
The reason that this battery is low,
is because we're doing some testing with the heat.
So at night, we crank it all the way up.
This is the return air.
So that air that I was showing you on the inside,
comes in, comes down the wall, out.
And when it's cold air, it's cooling the equipment.
And then going back into your ducted mini split.
So you're basically creating,
it's a vertical product like Apple,
in the sense that you're controlling
the software and the hardware in it.
Yeah, I mean, as many things as we can do
within the sequence of manufacturing,
we're able to control the quality,
the timeline of it being built.
And so there's benefits for us to do as much as we can.
Here we go.
