The Robinson Helicopter Company has introduced a symmetrical horizontal stabilizer retrofit kit, aka empennage, for existing R44 helicopters. The new stabilizer reduces a potentially dangerous right-rolling tendency when the helicopter encounters a low-G flight condition. This video shows the process and challenges of installing the new empennage kit on my R44 at Creative Rotorcraft Maintenance in Chino, California. After explaining the installation process, I fly my R44 with the new horizontal stabilizer for the first time to review how it feels for an average pilot. #micahflies
▶Join our channel to get access to perks◀ / @micahmuzio
00:00 R44 Empennage Kit 00:30 What does the empennage kit do? 2:52 Installation Process & Challenges 6:35 Cost for Parts & Installation 8:10 Flight Test 10:24 Why the empennage kit is worth the price
This is my Robinson R44 helicopter.
I love it, but every time I fly it,
I feel just a little anxiety.
Thankfully, Robinson has addressed that anxiety
with a new Empennage kit.
Saying, Empennage feels a little fancy,
so let's just call it a Symmetrical Horizontal Stabilizer.
To install the kit, I brought my bird
to Creative Rotorcraft Maintenance in Chino, California.
We'll talk about the install
and see how the chopper flies with the new kit,
but first, what's the point
of the new Symmetrical Stabilizer?
So this is our helicopter.
It's a Robinson R44, and if you notice,
this is an asymmetrical tail,
so we've got the boom that comes back here,
and then the entire horizontal tail surface
kinda comes across on this side,
so it's all on the pilot's side.
There's this issue with, it's called mast bumping,
and it's a phenomenon that's specific
to two-bladed helicopters like ours,
but it's exacerbated by this tail surface,
which they eventually discovered.
So basically what happens is if you're flying
and then the helicopter gets really light
in a low-G situation, what happens is
that this kinda comes up into the wind
and it pushes down on the top of this,
and it basically rolls the entire helicopter to the right,
and then because of a phenomenon
called dissymmetry of lift in the rotor system,
the entire rotor disk is tilting to the left.
Short story, you can exceed the limitations
of the rotor system and really bad things happen.
So the new stabilizer is symmetrical.
It actually mounts like here,
and it's the same on the right and the left,
and so you get rid of all this asymmetry
and you have a symmetrical tail surface,
and that keeps the helicopter level
if the helicopter gets into a low-G situation.
It's a bunch of nerdy helicopter stuff.
Nonetheless, I'm super jazzed about it.
Adding some detail as to why I'm so jazzed,
I've owned our Robinson R44 for almost four years now,
and it's been amazing.
It's roomy for a family of three,
it's quick, it's comfortable,
it's been incredibly reliable,
and even though it's crazy expensive for me personally
compared to any other helicopter, it's an amazing value.
But in the back of my mind,
I'm always thinking about the risk of a low-G situation
from turbulence or unexpected downdrafts.
Now, the new tail design doesn't 100% eliminate
the possibility of mast bumping.
Any two-bladed helicopter,
like a Huey or a Jet Ranger or a R44,
is susceptible in low-G flight.
But the new tail negates the R44's
former right roll tendency.
From the pilot's perspective,
a right roll would be corrected
by moving the cyclic control to the left.
But in a low-G state,
doing so makes mast bumping even more likely.
In short, symmetrical tail equals safer helicopter.
That symmetrical tail design has been standard
on all new Robinson R44s since early 2024,
but thankfully for me,
Robinson also offers a retrofit kit for existing R44s.
As mentioned, for installing the kit on my ship,
I've turned to Creative Rotorcraft Maintenance, or CRM.
They handle the maintenance on my old Enstrom
back when I still had that thing,
and they take amazing care of my Robinson.
There's literally no one
I'd rather have handle the install.
Here to walk us through the process
is CRM owner, Jose Rodriguez.
Hey, what's up, Mike?
Well, first of all, thank you for coming in, Matt.
I appreciate it.
Install process of the horizontal stabilizer
is actually not too terrible.
It's a 25-step process for the kit.
You know, we laid everything out,
make sure we did an inventory check,
make sure everything's on the inventory.
Step number one, remove the horizontal stabilizer,
vertical stabilizer.
We're gonna remove this assembly here.
Let's start the installation of the small stubby stabilizer,
level the helicopter, and then just keep going forward.
Robinson actually made it super easy.
Gave you a nice little kit, rigging kit, set it all up.
It's a nice little jig, it's a one-time use,
but they really did it to help us out in the field,
make it easier on us, for sure, 100%.
And then you just line up all your holes.
You start doing a bunch of measurements.
First doubler's done.
It's nice, riveted.
Doubler's in the back.
Switch over to the left side.
And this one's next, as you can see.
This is the dirtiest part of the job here.
This is called perocio, so it's a sealant
that goes around the doubler
just to prevent any water from going in.
Here's the doubler.
There's that sealant.
I know it looked a little bit sloppy the first time.
This is why we tape it so it looks like this.
You get a clean finish.
Here's the stabilizer.
Just a little unveil here.
Pretty, pretty, pretty color.
Horizontal stabilizer, nothing to it.
It's pretty straightforward, honestly,
on the horizontal stabilizer.
Just remove the old one.
Put that little stubby one back in.
Put the light back on.
New Danger stickers back on.
And here's the other side of the stabilizer.
We had to shave down the upper stabilizer,
the lower vertical stabilizer.
It was just rubbing.
Some rubbing back here on the rivets.
So it's all even gap all the way across now.
So she looks good.
Just gotta clean her up.
Gotta vacuum the inside of the booms here.
There's a bunch of debris back in there.
Finish all the paperwork,
which is the hardest part of the job.
These pieces were already painted by Robinson
as you requested it when you ordered the parts.
And then we went ahead and repainted all the bolts,
the rivets, just so it looks a little bit more factory.
Original plan was to touch these up
just with a little brush,
but it looked real tacky after I did that.
Even though these were already painted at the factory,
I just decided to sand them down
and just do a complete paint job on them,
just so it looks really good.
Here's Rafael.
Getting started on this side, as you can see.
How could somebody screw this up?
Biggest thing's just measuring five times
before you drill, you know?
This is not your first install.
What have you changed in your process
from the first install to subsequent installs?
Are you learning anything?
Biggest thing's just using like a pneumatic rivet squeezer.
It makes things go by faster than squeezing them by hand.
So just using an air squeezer on there,
I mean, it just sped up the process by an hour or so.
All right, so there you have it.
As you can see, that double on the right hand is done.
Overall, like I said, it's not too complicated.
It's really hard to screw up on this, for sure.
There's a new stab, looking good.
And I'm not the best mechanic,
but I'm telling you, it's not complicated at all.
It's not complicated for sure.
I've seen you at work.
Thanks for getting that thing installed, man.
Yeah, anytime, man.
Appreciate it.
Thank you for coming in.
How do we both screw that up?
Okay, you're probably wondering about the cost.
Robinson introduced the empennage kit, sorry,
horizontal stabilizer kit at a discounted price of $3,600
through the end of 2024.
After that, it bumps up to $7,050.
So I paid $3,600 plus an extra $750
to pre-paint the kit in my helicopter's
volcano red metallic paint color.
Installation costs $3,360 plus another $400
to paint the rivets and the hardware.
Total price, including parts and labor, $8,110 plus tax.
Eight grand is objectively a ton of money,
but in the wild world of aviation,
meaningfully improving a helicopter's
flight characteristics for $8,000 is a crazy bargain.
With the symmetrical tail installed,
the big question is, how does it fly?
Checky, checky, checky.
So I've actually flown the R44 with the new tail
with a guy named Chris Smith.
He's one of the test pilots for Robinson.
And in my experience, it felt exactly like a standard R44.
The distinction here is that I'm very familiar
with this particular R44 because I own it
and I've been flying it for a long time.
So let's see if there's anything different
about how my R44 flies.
And while the helicopter's warming up,
let me quickly say a couple of words
about today's sponsor, Flying Eye Sunglasses.
This is very applicable for pilots.
They make sunglasses and eyewear
out of a patented material called Rosilamide
that makes one millimeter thin temples possible,
which means they slide very, very comfortably
and easily under a headset or a helmet.
If you'd like to learn more about why
this is the only eyewear I'll wear in the helicopter,
click the link in the description below,
use the promo code MICAH,
and you can save 10% on Flying Eyes.
All right, warmed up, let's roll the helicopter up,
get into a hover and see if it hovers any differently
than it did last time.
They're right, forward, left, and above.
I'm fairly light, so I'm always a little bit nose up.
In fact, these days I'm flying with ballast.
So one of the things that I'd heard
is like, ah, you got the tail underneath the disc.
That horizontal tail is underneath the disc.
So maybe it's gonna have a different attitude
when hovering, but actually this feels pretty familiar.
Doing a little pedal turn.
Okay.
I mean, that's kind of what you'd hope.
You don't want big differences between what you're used to
and then how the helicopter flies now.
All right, let's get moving
and see if there's anything different in forward flight.
Chino Tower, helicopter 284 Sierra Whiskey
at the base of the tower,
request right downwind departure with Lima.
24 Sierra Whiskey, can make a right downwind departure,
departure low, watch for your right downwind departure,
wind 240 at 6 miles per meter,
301 at 7, depart at base tower, bridge tower.
All right, right downwind departure,
Miami Airways 284 Sierra Whiskey.
24 Sierra Whiskey, on course for your change of pursuit.
For your change, yep.
So in forward flight, I'm doing about 100 knots right now.
And I wanna say that it feels more stable,
but I review cars for a living
and I know it's really, really easy to delude yourself
into thinking you're feeling things
that you aren't necessarily feeling.
But yeah, off the cuff,
I don't know, if I was just to hop in here,
I wouldn't say like this feels radically different
than the 44 did when I dropped it off.
Try a couple of turns, going left, going right.
I'm not noticing any odd movements from the helicopter
or weird vibrations.
We're gonna slow it down a little bit here
and see if I notice anything, different speeds and such.
Descending, well, descending like normal, okay.
Given the change, it's really, really tempting
to believe that there's something different
happening dynamically here while I fly.
But realistically, nah, I think it just feels
like my old R44.
So if the new tail doesn't fly differently
for the average pilot, what's the point?
Well, the traditional answer to avoid mast bumping
in an R44 when flying in turbulence
has been to simply slow down.
That recommendation doesn't change with the new tail.
Where the symmetrical tail design really behaves differently
is at low G situations.
The kind of stuff that test pilot Chris Smith
is paid to explore, but I am not.
That's it.
There are times when turbulence is hard to anticipate.
It happens.
The big difference is that now,
if I inadvertently experience a big downdraft
or inadvertently nose the helicopter over,
that new tail will inhibit the R44's
old right rolling tendency,
meaning I won't instinctively apply left cyclic correction
that could amplify the likelihood of a mast bumping event.
I think of the symmetrical stabilizer
like stability control on a car.
It's a safety net that keeps dicey situations
from getting worse.
The empennage retrofit is not mandatory for the R44,
and eight grand is not a frivolous expense,
but the kit does add value to the helicopter,
and less importantly, I think it looks pretty cool.
Statistically speaking, the biggest danger when flying
is me, the pilot, which is why I choose to fly
very cautiously, especially in the mountains
where big up and down drafts are more likely.
Even so, swapping in the symmetrical tail was a no-brainer.
It gives me safety margin
in challenging flight conditions,
and I've never regretted investing in better safety.
Initial impressions are that the helicopter flies
in the exact same way it did
before I got the symmetrical tail.
I think maybe there might be some nuances
that'll come about maybe when I'm in bumpier conditions,
flying in the mountains, that kind of stuff,
and if I discover anything like that,
I'll be sure to share, but yeah.
First impressions, it just feels like my helicopter.
For a lot of pilots, flying helicopters is about work.
For me, it's about fun, and oftentimes with my family.
In either case, flying is so much better
when you're confident, and from that perspective,
Robinson's new Empennage kit is money well spent.
Now that I'm feeling more confident,
I'm eager to have some longer distance journeys
in the R44, and we will share this with you
on the channel in the not-too-distant future.
Until then, go get your high five.
Bam!