Parkside _ Stanley FatMax Wire Stripper and connector Crimping Pliers set PCZS 231 C2 vs FMHTO-96230

Tools plus
2 followers
In this video im showing th Parkside cut, strip and crimp tool comared tot the Stanley Fatmax Stipping, crimping and cutting tool. Just to give you a better look at botj tools.
De models is comapring ar the Parkside 231 piece set PCZS 231 C3 versus the Stanley FatMax FMHTO-996230
just to give you a closer look at the best crimping pliers. After watching younmight know wht is best for you.
Next week another crimp tool by KAIWEETS what is a way better tool an mind blowing again.
Please subscribe and comment and maybe you comment ends up in my Q&A video of next month!
#machine #tools #powertools
Comments are disabled for this video.
Hello YouTube, hello my viewers. Welcome to another video. So I bought myself this all-in-one
tool from Parkside for cutting wires, stripping wires, splitting wires and to apply connectors
with the crimping part. It's a complete set with all these connectors which I'm going to show you
when we look at the back side. On the back side you can see it's a 231 piece set, a three-in-one
three-year warranty. You can see the model number here and here on the bottom you can see what has
been delivered with this tool. I have an old one, Stanley Fatmax wire cutter stripper tool
and we're going to compare it. They look pretty much the same but we're going to see if there is
any difference between these tools. So let's strip some wire, cut some wire and apply some of these
connectors and let's see how to use it in the right way. First we take out the tool. You see
there is a small connector here, belongs there. Small description how to use the tool. I really
don't like manuals and a multiple language description. Let's compare these. There is a
slight difference between them. You can see here are all the screws. This one has more like a knife
or something. Cutter. Here it's different. The back side and the other one. Slight difference.
So this part is to set the length of how many wire you want to strip.
Let's give it a go and you can also move it aside. I'm gonna cut some wire and when you're stripping
make sure, put this one back, when you're stripping make sure most of the time this little piece will
stay in there. If I try to strip now again, now it goes out but sometimes it don't work. So make
sure you always empty it. Let's cut it again and try it with Stanley.
They both work fine. I'm using this for a while now and they're both working fine. Let's strip it
one more time. Set the length. Strip it one more time and then apply some crimson connectors.
Now this set comes with all types of connectors. Red and blue, insulated, shrink connectors,
fork connectors, small rings, red and blue. There are also some cable ties inside the box.
Let me show you this one. They are very small. Let's put them back in here.
So let's start with these blue ones. I'm not a big fan of these tools but the best way is
to let it go all the way through so you can get no further. I'll show it from the back side now.
Maybe you can have a better look then. Just give it a good press and it should be proper attached
now. So let's do the same thing with the Stanley tool. Putting it all the way through also.
I have the Stanley tool. It's pretty much the same tool. Maybe they're even made in the same
factory. I don't know. Put it in there. Let's see if it's proper connected. That goes nowhere.
That's so tight. You have to check them anytime you apply them because sometimes they just don't
crimp very well. That's why I don't like these tools. But I'm going to show you another tool
in another video which is way better. Let's try another one. So this is just some old wire I'm
using. Don't worry. Let's apply one of these. Same method and that's very tight. If you make
these connections just check if they are tight enough by pulling the wire. It should be as strong
as this. So that's a very short video. I'm just showing you the tool and yeah they both work
great. It's not that the one is better than the other. They both work fine. The only thing is
maybe because this one is new this feels a little weak here with sliding it and this feels
more proper. If you need to apply connectors they are good but there are better crimping tools.
It's not that this is better than this one or the way around. They're both good. I do like
these knives. I don't know if they stay sharp or if they cut proper for a long time. You can also
set the pressure here as you can see. You see it will come closer and it's the same for the
Stanley tool. You can also turn this little one. So this was just a short video to show you
the product in a better way than in a picture. If you want to buy one of these then you can
compare it. More easy in a video than just on a picture and I think both the same. It doesn't
matter which one you buy. For now thanks for watching. Please like this video. If you have
any questions leave a comment and maybe you will end up in one of my question and answer videos.
If you want to see more of my videos and if you want to see another crimping tool video next week
please subscribe to my channel and be notified about that video.
Thanks for watching and I hope to see you next time.
