Pottery Tutorial- How to Throw off the Hump

The Story of Ceramics and Porcelain
9 followers
1 Video View·Mar 7, 2025
Welcome to our new studio! Today we are covering how to throw "off the hump"! In other words, how to throw several small pieces off of one large chunk of clay. This demonstration includes a knob and a bowl, but with this technique the possibilities are endless. Let us know if you have any thoughts, questions, or feedback in the comments below, or find us at potteryplus.squarespace.com , Facebook @PotteryPlus , or Instagram @potteryplusco
Music by Bensound.com
Hey pottery people! Welcome back to the Pottery Plus Studios 2.0. As you can see we're in a new
studio today. We've moved and so this is our first video to shoot in the new space and we're really
excited about that. For our first one in the new space we're going to cover throwing off the hump
so let's go get started. All right to get started throwing off the hump I've got three pounds here
I have measured, wedged, centered, and sort of combed up. Don't come at me I know that I said
in my John the Potter video that I didn't like to comb but for throwing off the hump you kind of
need to. So and just a quick note here folks a lot of times when I was teaching I would have people
want to throw off the hump but they didn't really know why so just quickly let me explain. We throw
off the hump when we want to throw lots of little pieces quickly without having to change bats and
re-center every single time that we do. Okay so if whatever you're making is not going to be
if the process is not going to be more efficient by using this technique then you know just use
your regular throwing techniques. So that's just something I observed in people sometimes they
would be more focused on wanting to do a technique rather than the best technique for the final
product that they were looking for. Okay all right so I just thought of the continuation of
what we start we um sorry we're working on last time that I would show you how to do a thrown
knob. The last time we did a simple lid with a knob that was just thrown right on the lid
but I touched briefly on like how you would throw a knob or make a hollow knob
and since knobs are small I just thought I would use that as kind of
an inspiration to show you how to throw a knob off the hump. If you were throwing a lot of knobs
this would be maybe a technique you could use. So I am isolating the clay that I'm going to use for
my knob and I know that's looking like a lot but you know if you're making a large form sometimes
you need a larger knob to go with it and so I'm just isolating what I'm going to use for that
and kind of re-centering it. So one of the actually really nice things about um throwing
off the hump is it doesn't really matter if the clay down here gets off center you just need to
worry about the clay that you're focused on staying on center otherwise you don't really
need to worry about it until you pull that clay up and you're ready to use it. Okay so I'm just
kind of got that carved out and it's nice and centered up. I need a little more real speed
here. There we go. Okay so now I'm going to open this just like the you know way we normally open
a pot. I'm just going to go straight down. All right so now I've got like this really thick
tiny little cylinder kind of a shape with these really thick walls and with a knob I'm doing this
style where it's hollow. You know you can only get it so thin before it's just going to collapse
but I am going to pull the walls up using my normal um like a tiny crab claw and my fingers
supporting on the outside so it's like it's a it's my normal motion for pulling the walls it's
just with my fingers instead of my whole hands because it's so small so it's gonna look like
this. I'm just going to try to get some of the bulk moved around before I you know where I do a
really more aggressive pull. So here I'm kind of pushing it out down at the very bottom with my
finger into this finger and now I'm pinching that bulk in between and moving slowly up.
You can see it doesn't really look like a knob yet that's okay
I'm gonna do a little preparation before we start to shape the knob
and I feel that it's getting to the appropriate level of thinness so if this were like a pot that
I was throwing it would still be considered pretty thick but again I'm gonna sort of be
forming and sculpting this knob after I close it up so I don't want it to be weak.
Not too thin. Okay that looks pretty good. Go on to the next step. So if I want to make a round
knob what I'm going to do is I want to sort of define the waist part of the knob or the area
where I will attach to whatever I'm attaching it to and then I'm going to push out from the inside
it's going to kind of have like a weird little
straight up moment at the top but that you need that because that's what we're going to use to
close this in and now so I pushed it out from the inside a little bit but not too dramatically
because again you know you push it too far it gets hard to close in and hard to work with
so I'm going to go ahead and close it in now I still have plenty of material left up there
and if it gets a little wobbly okay just keep going you can do this on different scales too
like I used to sometimes do this just when I was making a knob for a teapot because I would want
something that I could kind of push and make asymmetrical because I was sort of making like
asymmetrical pieces at that time um and also when you're when you so the lid that I showed you last
time you just throw the knob right on the lid but some lids you have to throw and basically the
lids upside down and then you carve it out so you have to attach a knob so this is also a technique
you can you can apply if you're doing different styles of lids okay so I've got this closed in
now and you can see it looks a bit like wobbly asymmetrical but I don't know friends I've just
found that with a closed in form of any kind you just kind of have to live with a little bit of
that and then center it back up as best you can once you get it closed at the top and the thing I
used to always say to my students is when this thing is not moving you're not going to see a
tiny bit of awesomeness when it still becomes much less noticeable okay so from here I'm just going
to do some shaping so I want again a little more definition down here at the bottom a little more
curve going up to the knob I'm just sort of pushing in and defining that more and then also
I kind of like it to be flat on the top and what's nice about that is when you flatten it out it
pushes that air bubble that's in there kind of down and out oh I reopened my opening hold on folks
might have gone a little too hard that's okay yeah and so what you get when you kind of flatten
that top part is sort of a like an angled sort of a knob like that which I don't know
I just I kind of like that I feel like for usability it's it's a nice shape to be able to
pick up especially like if you're making a knob this big this would probably be for quite a large
lid that would you know have some bulk to it so you want a nice good feeling shape for someone to
pick up something like that all right I'm going to quit fiddling around with this and I'm going
to use the rest of this clay to show you how to throw a bowl off of the hump but that is our
okay so I'm just smoothing the stirrups out a little bit I got up to get my needle tool
and I saw my metal rib over there and I just couldn't resist but I won't fiddle around with
this too long um so I just wanted to quickly show you how to remove this because obviously
we're going to have to take it off to be able to use the rest of the clay that's there underneath
so I'm going to wet that down a little bit so my needle tool will slide I'm going to slow
the wheel down and I'm just going to use my needle tool and folks this is just the kind of thing that
like you're going to feel nervous but you need to just do it like the longer it takes you the
more chance you have of it getting messed up and some people do this with a wire cutter that's fine
too but you just kind of need to do it quickly so it's gonna look like this and then you just
take it away and remove it to the side I literally almost dropped that but that's okay all right we
made it it survived all right now we're going to move on to throwing a bowl off the hump
so now we're going to do the same thing again we're going to center back up and we're going
to isolate some clay but it'll be a bigger piece this time because I'm going to make a little bowl
and I will not by any means be using all of this remainder of this three pounds
but I'm going to have a little excess to start on our next project
and some techniques of making a lid like I said just a moment ago they start with a bowl
so it's kind of nice to have this little trick in your back pocket because again if you're
making a lot of lids throwing off the hump that's the kind of technique that
this or throwing off the hump is the type of technique that helps you when you're making a
lot of something and you want to do it kind of quickly okay so I'm isolating out what I want to
use for my bowl I'm gonna center it up again and I feel a little air bubble in there so I'm just
I'm not gonna get too worried about it but I am gonna sort of keep an eye on that and make sure
that I stay really well centered so since a bowl is a low wide form I kind of need to get this
centered a little lower and wider so it's already going in the direction that I'm asking the clay
to go to so I've talked about it in some of my other videos before if you center you know high
and narrow and then you ask the clay to go into a bowl shape it's just a little extra challenging
so we can remove that challenge by like almost getting the clay going in a bowl shape right from
the beginning honestly friends I'm not like an expert at throwing off the hump I just know the
basics that I can share with you to kind of get you started it's not a technique that I use in
my own practice but I know that beyond what I'm showing you just this basic version today there's
a lot of cool things you can do this technique okay so to start my bowl and put my fingers down
and at an angle so that I get that nice round opening I'm just pulling it back and towards
myself and kind of up and out at an angle like that I don't want our bowl to have a flat bottom
but you know what if it does it's fine don't like throw it away or anything just keep practicing
now I just need to do a little cleanup I think I'm going to open my opening a little further
and I'm going to pull this back a bit more now you can only go so far with this when you're
throwing off the hump because it's not as supported down underneath as if the bottom of
the bowl was just attached to the bat so I would say if you're making very low wide bowls very
stretched out bowls this probably is not going to be the best technique but if you're just making
like little um you know small ice cream bowls or cereal bowls or whatever this can this can be
a doable technique for that okay so before I really pull I need to kind of get rid of this
bulk and spread it out differently so that when I pull I'm pulling up from you know relatively
even walls so I'm just going to take my sponge I'm going to push that in and up
but still keeping my shape of my clay in a bowl
okay I'm kind of doing like a pseudo pull a semi-pull um to prep
the clay again for what I'm going to be asking it to do all right
so now I'm just going to pull as normal so I'm just squeezing and moving my fingers slowly up
the wall and just a reminder with bowls um if you don't go like perfectly straight up it's okay
but you want to try to so that you're not throwing and shaping your bowl all at the same time so if
I pull intentionally out like this it can get sort of out of control on me and get stretched too far
and I don't want that okay I'm just gonna look from the side it's gonna feel really bulky down
at the bottom folks because it's you know it's attached down there and you don't want to push
this in too far because then you make um the supporting like base of your bowl kind of weak
so you just sort of have to accept that you won't be able to take care of that until it's time to
trim but um if you're feeling like you want to pull and pull and pull just keep in mind you're
going to be pulling from what the base that is supporting the bowl right now so just don't be
too aggressive about it but I know sometimes when I feel those areas of fitness between our fingers
it's hard to not just want to get it all stretched out all right so now I'm just going to shape this
shape this bowl up and it'll be ready to cut off and I'm going to do my normal shaping I'm
going to lean my rib and I'm going to push the bowl from the inside out into the rib
and that's going to shape the bowl and smooth the edges for me
pretty good probably take it a little further but I don't want this video to get too long and
so I'm just going to do a quick refinement on the inside and I'm going to call that good
now obviously my needle tool is not long enough to cut under this guy and remove from the front
so I am going to have to grab my wire cutter for that I'm just seeing like a little indention here
folks that I need to stop fiddling around with maybe you see it too but you know how easy it is
okay I'm going to stop okay so again just like when we cut off our knob it's going to be sort
of nerve-wracking to do with the bowl but you kind of just have to take a deep breath and do it and
um I don't know feel as confident as you can I know if it's like your first time that's easier
said than done but um being intentional when you do this part will help I think
okay so I'm going to get it a bit wet again
and then I'm not going to do this with the wheel moving some people do
I think that's like varsity level throwing off the hump and that's not where I'm at today so
I'm just going to cut it with the wheel still and steady and then quickly just kind of pick
this guy up and move it off to the side and I go like that just pull it through
and then slide it off move it off to the side okay so that went pretty well I'm not I'm not
too mad about that um your bowl will get just a tiny bit worked when you do that but don't worry
you can kind of fiddle around with it um as it gets a bit drier and straighten it back out so
um I hope this video was helpful for you today and I'm really glad you joined us
for our first video in the new studio and we will see you in two weeks
