Making Primitive Pottery in the City With Store Bought Materials.

The Story of Ceramics and Porcelain
9 followers
You're saying, Andy, I can't get involved in primitive pottery.
I live in a city. It's easy for you. You live in Arizona where there's lots of
open public land where you can go out and collect clay and build fires for
firing pottery. I live in a city. I don't have access to
those kind of things. Primitive pottery might be fine for somebody like you,
but I live in New York, Los Angeles, Singapore,
London, whatever, and I just don't have access to wild clay and
places where I can fire pottery. It's not conceivable that I could get involved in
this. I hear you. I'm here today to show you
that anybody can get started in primitive pottery
cheaply and easily. So I went down to the craft store. I purchased
clay and pottery tools, and I'm going to fire it in my yard in the middle of town.
I'm going to show you how anyone can do primitive pottery no matter where you
live.
So I went down to the craft store yesterday to get supplies for making
pottery. I've never actually done this before,
literally. So I first visited Hobby Lobby where I found they had clay,
but I didn't see the pottery tools that I wanted. Then I went over to Michael's
where I found this package of pottery tools, which
should do for what we're doing. Nice starter pack of pottery tools. This
definitely has all the tools you need and
some you probably don't need. Unfortunately,
the manager of Michael's told me they don't carry potter's clay. All they have
is modeling clay. So that's like air dry clay. They don't
have anything that actually could stand being fired.
So I went back to Hobby Lobby and bought this $20
block of clay. This is the only potter's clay they had.
Moist Pottery Clay X-15, a natural gray clay in moist form
that fires to a light buff. According to the label here,
you're supposed to fire this to cone 5, which is like 1100 degrees Celsius,
and I am not going to do that. So not only are we
today experimenting to see if we can make primitive pottery
with just ordinary off-the-shelf store-bought clay,
we're also going to see if we can get this stuff to turn into ceramic at a
lower temperature than what it says. Now I could have gone
now I could have gone to a ceramic store and got some low fire clay,
but I want to make this as every man, as just
ordinary clay as possible. I want to make it just, this is what I have access to. A
Everybody has like a Michaels or a Hobby Lobby or something of that sort.
So I wanted some really generic clay so that we could see what we could do with
it. So here's my clay.
Real plastic. First thing I'm going to want to do is temper this stuff
because it might be good for making pots,
but it definitely is not going to hold up to the thermal shock I'm going to
throw at it. So I'm going to lop off a hunk of this
stuff and throw in a bunch of sand and then
and sand and things like that, but today I'm trying to show
how anybody can make clay. And so I don't want to use any specialized products if
I can help it. I want to use ordinary things that
everybody has around their house. And so to screen my sand today I'm going
to steal the screen out of this window. This is just ordinary sand that I got
out of a wash near my home. You might not have access to a wash. You
can buy sand at the hardware store or a craft
store. In this case, because I'm going
inexpensive, if you have access to a wash or any
like a creek, something like that, it's a good place to collect sand
for free. This is free sand, but like a lot of free things,
it's not the best in quality. It's got sticks in it. It's got larger rocks.
So I'm going to screen this using my window screen. I'm just going to
take a handful and just run it through there. You can see the
larger chunks of sand. Little sticks and roots have
collected there. And I can just take those and set them
aside to throw away. And now that I'm done using it, I just
pop this back in the window. That way your dad or your wife or
whoever might have a problem with this won't even know.
There's no harm done to the screen at all as long as you're gentle with it.
And I have the hunk of clay that I cut off of the block and I have a pile of
sand that's, I don't know, it's
maybe close to 50 percent. So I'm probably not going to need all of this
sand, but I'm going to start kneading it through.
And I'm going to use texture to tell me when I've got enough. I want to see
particles of sand in every bit of this clay when I cut
through it with my finger. I'll show you. Now this dry sand will dry out your clay
a lot, so you're going to want to add water as you do this.
Okay, now here's what I mean by feel. You break open a section of this, cut into
it, and you should see bits of temper consistently all the way
through there. You see that? You can see the temper on the surface.
You can feel it with your finger, the grittiness to it.
That's what I'm talking about. It's got temper all the way through it, quite a
bit. Now it's hard to say what the
percentage is, but you definitely get a feel for the
amount of temper you need there. And there's a lot, there's a lot in
there. Okay, so I've got my lump of tempered
store-bought clay. I've got a pookie. Now, you know, you can
make a pookie, but we're talking about how to do this
cheaply and easily. So this is a bowl that I got at a thrift store.
It's got a nice rounded shape, and so I'm going to use this as my pookie.
Being plastic, the clay will stick to it. So
I've got myself a cotton handkerchief that I'm going to place
in the pookie. That'll keep the clay from sticking. So you can use
any bowl or dish. When I started doing primitive pottery,
I used my mom's corralware. So if you look at the bottoms of my early pots,
they're shaped like little corralware plates or saucers.
So there's nothing wrong with that. Maybe later, if you get started, you make
yourself some nice pookies in different shapes.
But a plastic bowl like this from a thrift store works great.
And my metal rib I got in my little kit doesn't seem to be
firm enough to press it down into the pookie the way I want.
So I'm going to use this wooden tool here,
which I wish it didn't have that point on it, but we'll make do.
Maybe my fingers are best. What I'd really like is something more
this shape, but a little more rigid. That'll come in handy later on, there's
no doubt. Once again, that shape is not conductive
to getting down in there and scraping that without gouging it.
I'm going to try to use the blunt end. What I really would do if I was going to
keep using this would be to grind that down,
shave that corner off of there so it was more rounded on this end.
That would be more conductive to making round shaped pots.
It'd be easy to do even with a sander in just a few minutes. I'm going to see
if I can use this metal tool on the outside here. Yeah,
that works pretty good. That works real nice. I might even try
it on the inside when I'm done. Let's try it inside where it's a little
gouged up from that wooden tool.
Yeah, that's a little better. I just wish it was a tiny bit firmer.
or rim and that will be that. There you are.
You know, not done. I still have to scrape and smooth the bottom once it's dry
A pretty good start. Pretty good little pot for
commercial clay. I wasn't unhappy with the quality of the clay at all. It worked
real fine for what I'm used to with hand building. A lot of wet strength,
plasticity. I'd use it again in a heartbeat.
A little bit more work and then I'm not going to decorate this. We'll just
let it dry and then move straight on to the firing as
soon as we can to show you the whole process.
I'm going to fire right here in my driveway just to make a point that
you don't need a big open space. You can fire any place you have a driveway or a
parking lot, something like that. You don't want to damage the pavement,
leave burn marks or anything, but you can just put some dirt or sand
down. I used to fire in the parking lot of Beshbogawa and they'd just bring in a
bucket of sand. We'd fire on top of it and when it was done they'd just clean
the sand up and everything was fine. So I went down to a wash and gathered
this sand, but you don't need to. You could use
some dirt you have around or you can go to a hardware store and buy a bag of
sand and I'm just going to spread it out. I'm going to spread it out
ahead of time so it can dry because it's kind of moist
and then I'm just going to fire right on top of this and then when
I'm done I can just clean it up and I haven't
done any damage to the pavement. I haven't made any burn marks or anything
like that. Okay, everything you need to fire pottery
in an urban area without irritating the neighbors or dealing
with the fire department. I'll go through an inventory list later
pot in my kitchen oven for a few minutes earlier and the
pyrometer isn't really required, but it makes me able to tell what
temperature we're at and therefore I can know how close to
the recommended temperature we got this Hobby Lobby clay.
Fire's been burning for over an hour and it's all burning throughout now.
It's really hot. Let me turn the light on a second here
and you can see I covered the top with some sherds to hold in the heat
hopefully make it a little hotter. Thermocouple is in.
You can see that we are just a hair over 700 degrees Celsius.
So that's good. Plenty hot. Should be firing some good pottery in
there at that temperature. We'll see what the high temperature comes
out. I haven't fired like this before so I don't know what the high is going to
be. If it can be significantly more than seven if we'll reach
eight or not and then in the morning when it's all
cool we'll open it up and see how the pottery did.
All right this is set all night and cooled. It may still be warm inside. In
fact the pottery on top seems a little warm
although it could be just from sitting in the sun.
700 was the top temperature. Shortly after I filmed that last segment
the temperature started to slowly decline down into the 600s.
By the time I went to bed I think it was around 500 C.
Still pretty hot but definitely going down.
Just trying to determine if I need my gloves or not.
It's warm. It's definitely still warm.
Oh it's ceramic. It's fired because
it's clinky. We got a couple of little pops
from my temper. For the most part it's pretty good.
And a sign on the on the box of clay it said it fires to a buff color and that
is exactly what I've got there. Just an all over buff color. So we could
try painting it next time but this shows
that it works and that you can do it with store-bought materials.
Okay what do you think? Now this wasn't a how-to so much as a proof of concept.
This just goes to show what you can do making pottery without any fancy
equipment. No wheels. No kilns. Using just store-bought materials and
tools that you can find somewhere near your
house. I think it worked out pretty good. It fired hard. We didn't need to invest a
whole lot of money. I'll put the whole price breakdown on
the screen here. I don't have it all in my head but the
box of clay was $20. The package of tools was like $13.
I bought 21 bricks at 50 cents each. What's that like
$10.50 something like that. And then a lot of these things are things you'll
use over and over again if you're going to make pottery. Like the tools
you don't have to buy that every time. This block of clay can make a lot more
than just this pot. I have a lot of clay left over.
That investment is going to go a long way. These are going to go much farther
than that. The same with the bricks. The bricks you'll use over and over again. So
once you buy them you won't need to re-buy them.
That little galvanized tub I already had but you can buy those at the hardware
store for, I don't know, $10 to $15 maybe. Anything
that'll keep the fuel off your pottery will work. It doesn't have to be a
galvanized tub like that. If you are burning galvanized,
be aware that the first time you burn it it's going to release toxic fumes. So you
want to either keep your distance from it. Maybe pre-cook it before you fire.
That way you can get over your pottery firing and not worry about breathing
those in. Once it's burned once those are burned
off. Another experimental thing I was using
was this Krylon triple thick crystal clear glaze
which I'd seen somebody recommend online just as a way to make a rather plain pot
a little bit prettier. Make it shine and I think it worked out
pretty well. As long as we're using store-bought materials I figured it was
a good place to try it out. It's something to keep in mind. It
obviously works pretty well. Makes it shine without having to glaze
it. Now, you know, this isn't for eating on necessarily.
It's for decorative purposes but it does work.
I want to take the time to thank Tony Soares who kind of invented what he
calls urban Anasazi pottery firing. That charcoal briquette and brick setup
that I used. So I'll put the link to that video where
he discusses that right over here if you want to see that.
I made a video a few months ago called How to Get Started in Pottery Cheap and
it talks about kind of making your own tools and
how you don't have to spend a lot of money to get into pottery. And that video
kind of goes hand in hand with this video
because that kind of shows how you can get started in primitive pottery without
spending money. And this one kind of shows how you can do
it by spending a little bit or maybe if you don't have access to the great
outdoors how to get your hands on some clay and fire
without going out to public lands like I can do here in Arizona.
So I'm going to put the link to that video right over here so you can watch
that if you haven't already seen it. Alright, thanks for watching. I'll catch
you next time.
