Highcom Security Defender C.A.I. (Civilian Armor Insert)

Ballistic Lab
1 follower
Mar 6, 2025
Weather:
Temperature: 75.0°F
Humidity: 66%
Baro: 29.90""HG
Dew Point: 62.8°F
Elevation: 849 Feet
Results:
115gr FMJ @ 1,147 fps, stopped
50gr JHP @ 2,171 fps, stopped
80gr SCS @ 1,394 fps, penetrated
124gr FMJ @ 1,297 fps, stopped
40gr TMJ @ 1,563 fps, stopped
28gr OTM @ 2,106 fps, stopped
50gr PSP @ 1,153 fps, stopped
Happy Birthday America!
Hey everybody, today is July 4th
and we're out doing some shooting.
We have another panel from HICOM to test today.
This is their Defender CAI
or Civilian Armor Insert.
This is a level 3A panel.
UHMWPE
material like their STP plate.
It's rigid. It has
PAXCON buildup on it.
This is designed to go into laptop
cases, briefcases, backpacks
etc.
It has really good ratings as far as
what it can stop. It's got the Liberty Civil Defense
on there. Some of the 5.7
stuff. So we're
going to run this through some tests
today. I kind of was thinking of a different
way to do this and I came up with
a pretty neat idea.
I've got a Dell Latitude
D830 here.
This is an old one
that's going to be recycled
since I can't do anything with it. It's got Windows XP
on it and it's too slow for me to
do anything with. So I've got that
and I've got this
Swiss laptop
bag.
I've got our 5.7
here.
Our standard
9mm M&P
and we even have the
Evo out today too.
So my plan is
I'm going to put the
laptop in the bag
with the armor insert here
and we're
going to take a few shots of this and see
what it can stop and how much
it will stop before our laptop
back here meets its demise.
We'll use our clay briefcase as a
backer and the chronograph is working
pretty well today. So we'll try to get a
chronograph off each one too.
First we'll take a shot with our M&P
with the 4.95 inch
barrel. We have a 115 grain
full metal jacket in here from
Battleborn's Munition.
Inside the
Swiss bag
we have the armor insert
fabric divider
laptop with the screen
facing us and then more
fabric.
Velocity
was 1147.
So here was our shot
right where we wanted it to be.
What do you guys think? It should have no problem
stopping that. Let's take a look.
There's our plate.
There's a dimple there.
A dent on the back side
but no pass through.
What do you
think about the laptop?
Uh oh. There's a dent
there. I wonder what the lid looks like.
I think
the screen's broken dude.
There's a dent
even in the track pad right there.
Well needless to say if you got hit
with 9mm your laptop
would be toast but you'd still be alive.
Let's try
a couple other threats. Let's try
the King of Speed. We've got our Liberty
Civil Defense 9mm here.
In our prior test their
SDP plate defeated this round. We'll see
what happens again.
We'll still use the M&P
for this shot.
Velocity
was 21.71
While
we're at it we'll also try the
Fort Scott Munitions 80 grain solid
copper spun round. Their SDP
plate stopped this last time so we'll see
how this one performs too.
Velocity
was 13.94
Here was
our Civil Defense and here was
our Fort Scott Munitions.
There's our Civil Defense.
It's probably hard to see
from the camera but it stopped it.
The Fort Scott Munitions
the tiny little hole there
on the back side
I see some material poking through
there. Look at that dimple
from the Civil Defense.
Let's check the laptop.
We can actually check the
case.
I see a hole there.
Uh oh.
We have a penetration.
That Fort Scott
Munitions round is really hard to stop
because it's pointed and it's copper so it's
a fairly little tough round.
It made it through that
thick laptop.
Let's see what the inside of this thing looks like.
I'd say this laptop's seen better days.
There goes our space bar.
There's our
Fort Scott Munitions hole.
Looks like it went all the way down in the briefcase
and somewhere in there. We'll try to dig it out later
maybe, if not, not a big deal.
Let's try one more
9mm and we'll play with the
5.7 a little bit. We'll take a
shot from the CZ Scorpion Evo
3. This is an almost 8 inch barrel.
We have some
124 grain
Winchester 9mm NATO.
This is a full power
considered plus P load.
Velocity was
12.97.
Here's our shot right here from the Evo.
Let's check our plate.
There is the hit right there.
We're more than 2 inches from the other one
so that's a good fair hit.
No pass through.
This plate has seen better days.
There's a heck of a dimple there
but it stopped it. Our laptop
probably
not going to go into Dell for repair any time
soon.
There's a dent there.
And as I open it, more and more
pieces keep falling out.
Definitely think the laptop's had it.
But hey, I'd
give up a laptop any day
to stop a bullet.
As far as back face goes,
the laptop's absorbing
90% of the energy.
There's no back face on here
whatsoever. These marks are from me
beating it with a hammer flat.
Let's try the 5.7 now and see what's going to happen.
So now we've brought out the
FNH 5.7.
This particular cartridge excels at
penetrating all types of
soft body armor.
We're going to start with the American Eagle
TMJ first. We've got some
SS-198 and a couple
other goodies we may try as well.
Velocity was
1563.
That is some slow 5.7.
Now we have some SS-198
LF. This is a 28
grain or 27 grain
OTM, open tip match or
hollow point with an aluminum
core.
Velocity was 2106.
And now we
have a 50 grain
pointed soft point. This is Elite
Ammunition's quieter load
for subsonic use in the 5.7
pistol. Every time
I've tested SB-193 against
soft body armor, it goes through even though
it's only going 1,000 feet per second.
I don't think this bullet design
will allow it to pass through, but we'll
test it anyways.
Velocity was
1153.
Here was our American Eagle TMJ.
Here was our SS-198.
And for some reason
that subsonic
was way down there.
Let's check our armor panel
here.
Hard to see, but right in there was
American Eagle
TMJ, SS-198,
and down here was that subsonic.
But, no pass
through. There's some
huge dimples there,
but this plate is tough.
It's holding up against everything I put
at it.
I'd say that was a pretty good test.
This plate stopped everything we put at it
except for that Fort Scott Munitions 80
grain load, which is kind of an oddball load.
It stopped all the 5.7
loads I put up against it as well.
Now, I could have picked
a bunch of different loads that I know would have penetrated
this plate, but that really wasn't the point
of my test. My test was more or less
to see how this plate
reacted with the laptop behind
it, and then the clay behind it as well.
We can come to
conclusion based on what our Dell looks
like, is if you had to use this
in an actual situation, your
laptop would probably be toast
against common threats, but you'd
still be alive. This particular plate
right here is a 12x12.
I think it runs right around
$180. A little on the
expensive side, but
this plate stops a lot of stuff
that your soft, flexible 3A
won't stop.
And for the purpose of throwing it in your laptop
bag, I think it's hard to beat the
price point on this stuff. As always,
thanks to HiCom Security for providing us with
these panels to test, and thanks
to everyone for watching, liking,
subscribing, sharing, and everything
else you guys do.
Until next time,
take it easy everybody.
I wonder if
Swiss will let me warranty this
bag.
