Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is joe's
classic video games back with another
cool
pinball repair video for you this
evening now if you haven't been watching
we've been working on this
awesome 1963 i believe got the
swing along pinball machine and it's
swinging along just fine
so in the first video we cleaned all
kinds of stuff inside of it all of the
switches and the relays and the stepper
units and all that and then in the
second video we fixed it and got it
pretty much up and running
but we were waiting on some parts
because we had all kinds of little uh
stuff to knock out on a uh on a
checklist that we've there's a checklist
punch list that's what you call it
we've got a punch list of stuff that
still needs to be done
and then we need to do the play field
and all that too so we have gotten in
our parts
and now we are going to go through and
systematically
knock out every little problem that we
wrote down so
that's what we're going to do on this
video we're fixing this up for a lady
who uh
wants it before christmas and you know
what
it's still before christmas i think
we're gonna make it happen what do you
think
so uh let me get our little uh
tablet and we'll check out what all this
thing needed
we'll look at the uh the parts that we
got in and we'll see if that's good
enough
all right folks so these are our buddies
down the street
in gastonia that print things
and they bring us these little pads this
is an older one but it brings these
little pads that we can write on
so we made this list last time so the
first thing that we noticed was
the 115 volt hold relay was missing and
disabled and so they had it where the
black and red wires are always connected
and the black and orange wires cannot
connect so i don't i can't figure out
what the black
and orange wires being connected would
send power to
but with the black and red wires
connected basically as soon as you turn
it in
uh plug it up you have power
so i mean it works fine like that
but for some reason whenever
that coil isn't in there the black and
orange wires connect
but i don't think it's it looks like
they just made it where it's always
powered which is fine with me if they
didn't do that that 115 volt
hold relay would be on the entire time
that the game's plugged in
and those cook so i don't
i don't mind them having it always
connected i was just curious of why
since the black and orange can't connect
now what those originally would have
sent power to
maybe just well it wouldn't have been
the tilt light maybe the tilt relay or
something i don't know
or it may be a way to to make sure that
it ends the game
so if you start at ball three or if you
end up ball through ball two
and you turn the machine on the machine
off
whenever you plug it back in the black
and orange wire being connected
may uh reset the the game over relay or
something like that
but it's not that big of a deal okay and
then the next thing that we noticed was
that the brake was missing
so i'll show you what that is that was
that's on the uh
the score motor and i have ordered a new
brake i don't know if it's the right one
or not but i ordered it
so we'll see
this is the score motor and right here
is the break this little blade is
similar to these
and that it sticks way in there or into
about here
and see this post right here this rivet
basically it should
whenever this thing stops that break is
on it so that it gives it a little bit
of drag
and it kind of makes it slow down as it
gets to its
uh position each time so it will grab on
that
post and then whenever it turns a third
it will grab on that one and when it
turns it third it'll grab on that one
and it's there just to literally break
it just slow it down a little bit
and the purpose of it is so that
whenever the motor stops that it kind of
stops in the same spot each time
so we're going to replace that it's as
simple as taking a couple screws out
and putting the new one in for whatever
reason the brake is often broke
there's the old one removed and the new
one next to it now you might be thinking
how in the world did you get a brand new
one
on something that old
well there's this great place called the
pinball resource
and they do all of the old em stuff so
stuff like this that is often broke like
i mentioned
they make brand new ones so
some of this stuff you can get and this
is one of the things that you can get no
problem
just get in touch with the pinball
resource pbresource.com
they're uh they've got a lot of stuff
now they like you to have a part number
though so if you can find the part
number
that's even better so uh they uh
if you've got the part number they can
track down just about anything i'll show
you here in a minute we ordered some
other stuff
you're going to be amazed they had some
of this stuff but let me go ahead and
i'll uh screw this new one in and then
we'll look at how it turned out
all right so there's the blade down in
there so watch what happens as it spins
around
all right
so it kind of catches it a little bit
to kind of help it stop at the right
place
so that's that
all right so let's see what is next on
our list
i think we got that one nice and fixed i
think it's really fixed
we'll mark it off here in a minute okay
so next is the bell
grommet and there is a bell missing
so we got a couple bell problems
so here's the bell in the back the
grommet it's just the rubber has
dried out so it's real loose which means
it doesn't quite sound as good as it
could
so here's what it sounds like now
not bad and then there is also
supposed to be a bell hanging underneath
this zero to nine unit
and it is missing so uh
i can get this to come down without
breaking anything it should mount right
there
um i don't know why or maybe it's right
there
i don't know why uh it's not on there
yeah you can barely see
i'll get the flashlight you can barely
see where there was one mounted there at
some point
see the marking you can see it just
barely that it was there
might be able to see more of it
underneath it
um so we're going to put one back on it
so that's our two things so pinball
resource again
was able to
send us a brand new bell have you ever
seen anything more beautiful than that
look at that
perfect a perfect reproduction of the
bell in the game
now uh they make them black and like
this
i don't know if it changes the color the
the sound or not
and then these are the little grommets
so i'm going to take out the uh
i'll take out the one bell first and uh
we'll put a new grommet in it
and then we'll figure out how to mount
this one to the other one
okay so i mounted the grommet on this
one
so it'll hold it a little better
we won't be able to tell until it plays
if that's any better
and then we mounted this one on the
bottom i found a screw with a nut
and this little clacker this little
clapper
comes down and claps it right
and so every time this turns it's set up
in such a way that that lever moves
and hits the bell now this one's kind of
loud
it sounds pretty much just like this one
though
so in this game you got two bells they
sound the same but you know
tis what it is you can't fit a bigger
one there and that one's original so i
guess that's just how they were
originally
um but yeah that's where we're at
so we can mark that off our list
we're moving right through them aren't
we
break was missing we fixed it the bell
grommet and the bell missing
the one point relay was stuck for a
little bit we fixed it last time
score real parts are broken
so on the back box i have
five of the score reels in place but
this one
on the second player side is all tore up
it ain't right so i've got it taken into
a million pieces
so there is a spot
in here and yes the power's on you so
there's a spot in here that's messed up
so this little
this little cam on the shaft is screwed
up
so let me take that apart i'll get that
out of there and i'll show you the part
that's broke
okay so on these particular score reels
this mess of stuff
came out of it this is all broken up
um this is supposed to be like that
and then this slides down over it and
then there's a little arm here
that's broke off well
pinball resource again to the rescue
with a brand well that's not a brand new
one a used one
but they had a used one so that's good
for me i think they do make
reproductions of these i just didn't
have any
but then if you look this little arm
that's broke off that part
this was on it so they lost this too
whenever the arm broke off and it wasn't
in the cabinet
but once again pinball resource had the
right thing
so i'll put this together and show you
how it all goes under
okay so that's how it's supposed to go
in there and there is a spring
that pulls on that which
forces this little plate around which
means that it catches
in this cog this cam
and as it turns it doesn't let it turn
backwards
okay but when this broke off and was
lost
the spring was attached to him so the
spring was lost
ah but pinball resource makes
replacement springs
this stuff isn't even very good i don't
even know how much it was maybe a few
dollars
so it's a kit this is called the gottlib
10 step
unit because i guess it wasn't always
used for the score motor
i mean the score reels springs shown
below are actual size
listed in size order match springs to
their legend below and replace
accordingly
so they have this little blown up
um drawing of it
and this is where we're talking about
they've got all the old stuff so this
big long spring is the one that's
missing
this one is actually still in there
and this is the piece that was broken
and there's the little metal piece
that's gone
[Music]
so this should get us going again all
right so i'm going to try to finagle it
all in there and we'll see what it looks
like
all right it's back in there put the
spring on it
so i'm going to bolt everything back
together and we'll see if it
clicks and clacks like it's supposed to
let's see if i can do this with one hand
it's stepping people it's stepping
how cool pretty complex little thing for
a score reel usually they're not quite
this complex but
you know what it's no longer missing
parts though so i can mark that off the
list
and then we'll test it here in a little
bit see if it's uh actually working
right
but uh on to the next one
okay so that all that leaves us on our
list is uh the ten point real sticks
sometimes it's like if you score 50
points sometimes it only gives you 30 or
something like that
on the one player side and then the
second player reels we haven't tested
because that one was broke so i didn't
uh
i wasn't using it at all so uh that's
what we need to we need to test the
scoring some more
so let's see what we can do with that
so i've got it plugged in we already saw
that those two reset whenever it starts
because i
we we did that before but let's see if
she'll
cooperate
alright so our new one there reset it to
zero
and uh it says one or two players can
play
i haven't replaced any of those light
bulbs so i think that should have just
lit up the second
player okay so we've
elevated our ball the
shooter rod is on this uh
on this particular one is on the
lockdown bar so the ball comes up and it
gives us 20 points
no problems it gives us 50
okay so just a second ago when i was
back here
i pulled out this 10-point one and it
was fine there was nothing at all wrong
with it
um it moved real smooth everything was
cool so what i did was i looked at the
10-point relay
and the switch that sends the power up
to this
was adjusted pretty far away so that
whenever it touched it just barely
touched so i made it a little tighter
and i think that may have just fixed the
the issue where it doesn't um score fast
enough because it seems like it's going
fast enough now doesn't it
so let's see on like a one
okay i'm gonna hit it seven times one
two three four five six seven
no problems
you want to hear the most annoying sound
in the world
i think it's working fine people so
let's do let's do uh
like 30. okay now let's do
50 over and over again to get it to roll
[Music]
past
nothing wrong with that those score
reels work perfect people
they work perfect so now
we need to go to the second player and
see if that works
[Music]
all right so it has lifted up the second
player and lit up the second player
so let's try the one points
oh by the way that that the one point
that you're hearing
the bell is this one
okay so the ones are working just fine
so let's do our tens so this is 20
[Music]
30 and 50.
folks they're all working pretty good
i think we fixed the scoring what do you
think about that
okay so i'm going to uh take down the
back
the the back light board and i'm going
to swap all of those light bulbs
[Music]
so let's look at that and just see uh
see if we've got any light bulb issues
or what the deal is
okay folks i've dropped it down
everything looks pretty good the only
thing that's really bad on the back
glass it's in pretty decent shape
actually is the woman's face which is
the worst thing that could be bad on the
back glass
so what i'm going to try to do is i'm
going to take it out
and i'm going to clear coat the back of
the back glass so it doesn't get any
worse
and then i'm going to
spray a color behind her to make it all
more uniform so that
hopefully it doesn't make her look like
she has a leprosy
like it looks right now but the rest of
it's all pretty good it just needs to be
sealed so that it doesn't get any worse
so i'm going to pop that out and uh
we'll uh we'll clear coat it real quick
okay so we're clear coating it this is
what we used to clear coat it
you want triple thick because it's
thrice is thick this is the stuff that's
used for
uh like pottery and so the reason that
you you paint it on the back is because
it basically makes a thick covering on
the back so that the paint won't
flake off in the future so hopefully
that will save it from
any further degradation
and then whenever that dries i'll take a
little tape
and mask off that window and mask off
some of this stuff
and then we'll paint behind her face
with like an ivory now if you don't like
that we're going to do this
it could be removed we just clear coated
it so
the original is locked down in there but
she looks pretty rough
so we got to do something got to try to
make it look a little bit better
so we'll see how that comes out but
we'll let it dry first
and while we're waiting on the glass
i'll go ahead and replace all these
bulbs just so they're nice and new
and hopefully all of them will work
these four here where it says swing
along
on some of the older games they had
those four where they would blink
um to kind of draw your attention to the
name
and give them a kind of an attract mode
and since it literally says swing along
i think i might put some in there just
so it uh
adds a little bit of movement
okay so i got all the lights lit up good
and replaced i think they're all working
on the on this particular era of
gottlieb's
got libs they have this little screw
that holds this uh basically this wire
to the bracket and there's a nut down
below it that rubber dries out a little
bit over the years
so that screw will get loose and you'll
get problems where the lights flicker
and stuff if you tighten those
screws up get you nice bright lights
and we got our the woman's skirt is
going to swing
okay uh so yeah so let's go see if our
paint has dried yet
all right so i just masked off that
window there and the
you wouldn't want to get paint on these
either because they illuminate
and i just painted i put some spray
paint with kind of like an ivory color
trying to make it a little more skin
like
skin skin tone than like a pure white
basically on these old machines you
don't want to use like a pure white
if you can because nothing looks that
color it's all faded looking
and the skin tone of course is a little
more tan so i had like some ivory white
which hopefully will kind of blend in
everywhere there was a little piece of
paint missing and it'll uh
kind of uh even it out so we'll let this
dry a little bit and then we'll mount it
back in the machine
okay i like it i think it looks great
you can see how the paint did a pretty
good job
of masking the areas that were flaked
and giving it a nice kind of skin tone
and on this particular black glass it
looks pretty good because the only thing
that was lit
originally was was her her
you know bust for lack of a better word
like from here up was lit but if you
look her hand was never illuminated
and it matches now and her legs were
never illuminated
and that kind of matches down so looks
pretty good plus you know we have the
issue where it's faded
so this was like an orange or a red at
some point it's faded
all this is faded the guy's jackets have
faded so the back glass is not in
perfect shape anyways but
that was the main flaw was uh how her
skin tone looked and it looks a lot
better now so let's look at it with the
lights off
pretty good it's unevenly lit but that's
just because of the way they designed
the machine there's only
there's a bulb there and a bulb there
that are kind of the hot spots but i
like it
i think it looks good looks a heck of a
lot better than it did
all right i like it looks pretty good
you can see where
looks a lot better than it did i think i
like it a lot
um it's not evenly lit but that's just
because of the way
they designed the bulb so there's one
here and one here so there's
a couple hot spots on it i don't know if
i pointed that out earlier or not
yeah i like it looks a heck of a lot
better but i was kind of
worried about that but
much nicer okay oh and it's got
i don't know if i showed this earlier
either but
this is kind of faded so these parts
that are clear would have been red and
orange
but all in all a nice little back glass
considering what we started with minor
little touch-up
necessary so there you go folks all
right so i think we've got it playing
pretty good
i can't play it yet because uh
i don't uh i don't have the um
the shooter rod on and we haven't
cleaned the play field so i don't want
to mess with it too much but
everything's looking pretty good we will
do another video where we actually do
the play field and fix it up and then
we'll do one where we're playing it so
look forward to those hope you've
enjoyed them so far leave your comments
down below
give us a thumbs up for taking the
trouble to film it for you because we
didn't have to do that folks
i could have just done all this without
you
but i brought you along with us so uh
tell us let us know what you think and
we'd like to thank everybody that's been
using our amazon links
people have been really uh stepping that
up lately i guess because people are
buying stuff for christmas but to be
honest a lot of the presents don't look
like christmas presents for other people
it looks like you're just buying stuff
for yourself people and you know
i don't know if that's in the christmas
spirit or not but hey i'm not one to
criticize
um so uh we can't tell who's buying
anything or anything but you can see on
there like what people are buying is
pretty cool
so if you don't know about that there is
a link down below and if you uh
if you go to amazon through that link
anything you buy on amazon it gives us a
little tip for
so thank you to everybody that's been
doing that and check out
my brother donnie have you heard about
this yet if you haven't where have you
been the last hundred videos when i've
been talking about it
my brother donny is my real brother so
my actual brother donnie my brother
donny
has his own channel that has nothing to
do with arcade games it has nothing to
do with pinball machines
so you might think at first i probably
won't like that
well you know it's a little overkill if
everything's about pinball machines in
arcade games
sometimes you need different things in
life so the thing that he's been doing
lately is
he and i bought this little tiny it's
small
it's not big this little tiny grocery
store that was built in 1962
and we're fixing it up so that we can
rent it out and it's just this old
cinder block building that was a grocery
store at one point and
we're kind of rehabbing it and we're
going to rent it to somebody and then
we're going to film what happens
what they put in there and how it looks
after they rent it
so we're working on that right now so a
bunch of those videos have been
uploading if you haven't seen them go
check them out
uh but uh he's always got something
crazy going on
we've uh we've been working on the roof
lately
and uh trying to keep him from falling
off so far so good
so hopefully that the good luck will
keep up
but if not we'll probably film the
hospital so
make sure to check that out my brother
donny uh
again give us a thumbs up for taking the
trouble to film it for you leave your
comments below and we'll see you on the
next video
swing along