hi everyone it's back the return of the
five minute makes Series so I'm going to
create a card in no more than 5 minutes
I'm going to do it all in real time with
you as well so you can follow along if
you need that super fast card at any
time now this is using limited supplies
only so grab some pens or some inks and
some card stock and let's get
[Music]
Crafting now for this you can either use
your water-based inks or you can use
water-based pens I prefer pens for this
because it is much much quicker so I'm
going to just draw on an acrylic block
now lots of us have old acrylic blocks
from stamping some of us still prefer to
use these rather than a stamping
platform doesn't matter grab one you're
going to be able to wipe it clean anyway
so don't worry about any mess and I'm
going to just color on some stripes with
my pens these are going to be in a nice
bright rainbow color you can do
absolutely any colors you want so I like
to do like I say rainbows but if you're
doing something that's grungy you could
just do blues and GRE greens for example
example it's entirely dependent on the
situation and of course the occasion
that you're crafting for so a few swipes
across either way I'm going to go into
my Blues now and then I'll bring that
into a purple as well I know my purple's
quite a dark color so I don't want to
put too much of that on there so I've
got a rainbow of colors on my acrylic
block now I've got a piece of watercolor
card stock and that is on a rubber mat
the rubber mat isn't really necessary I
prefer it cuz I can really squish into
it then if you've got something like a
piece of foam that will work equally as
well then I've got a little bit of water
I'm just going to Spritz a bit of water
over this not a lot you'll be surprised
at how far A little goes and you'll
start to see as long as they are
water-based pens that that ink will
start to pull and move on your block so
I'm quickly now going to flip this over
and press it into my card stock so I've
got that beautiful rainbow ink
transferring now if you've got not
enough water on on there what you'll
find if I hold this up against the light
you'll get some patches that are missing
you can absolutely go back in see all my
ink has gone there so I can just go back
into a couple of areas and put a little
bit more ink on now you don't of course
have to do this if You' put enough water
on but it is a little bit of a guessing
game so have a play with it and see if
you need more by all means do more it's
not an issue it doesn't take very long
let's just do a line of blue up there
and then again where's my purple
there just purple there okay so again
Spritz of water a little bit more this
time try and fill in those gaps I've
obviously kept the lines the colors
similar to last time and pressed this
down again now when you lift that up you
should get a bit of a suction so you can
suction that
up and press on the back that often
helps now what you notice is the ink is
all remaining within the square which is
brilliant so we have got got a rainbow
watercolor pattern on our background now
you can keep doing that until it's
filled but I quite like that distressed
look to be honest what you can also do
and you can do it now or you can do it a
little bit later is just Spritz a little
bit of one of the inks or two of the
inks onto your block so you've got a
nice watery color and you can flick a
few extras too next you want to take a
sentiment dye I've got a word I've got
the word hello this actually fits
perfectly inside my Square it doesn't
matter if it extends out a little bit
but I'm just going to tack that very
very very lightly down onto my card
stock and run this all through my die
cutting
machine and what you want to do when you
take it out is just be aware that you're
going to have a few pieces inside some
of the letters that you'll want to
replace back in so for example inside
the L's the E the curve of the H and the
middle of the O there I've got some
pieces that I want to keep but these are
color coordinated with your background
so you're easily going to be able to see
where they go so take yourself a card
base this is going to go over the top
now if you like that drop shadow look
you can use foam tape to adhere this on
I do so I'm going to use this and I also
I quite like the look of it as a
silhouette without the pieces put back
in depends really exactly how strapped
the time you are but I'm going to today
pop those pieces back in in a moment I'm
not going to raise them up on foam pads
though I'm just going to put them down
into the background with some tweezers
so this is already cut to size to the
shape and size of my card
base there we go so pop that on in the
center
there and now I can carefully take out
the pieces now the best way to do this
is to take a little bit of glue
something that's got a fine Precision
nib on it and pop yourself some glue
where you're going to need it for the
pieces that need to go back in so just
making sure I'm getting these in the
right
place little bit here and a little bit
here okay so once I've got my glue down
I can take my Pokey
tool lay my sentiment back in to where
I've just die cut it from and just pop
through those pieces that you want to
keep so that's these pieces out of the O
out of the L pressing them into the glue
that you've just put
down there if you gently lift that up
they should all be in place absolutely
perfect there's a fun rainbow color card
with that drop shadow look as well from
the sentiment it's one sheet of card
stock on top of your card base a little
bit of ink and a dye so so quick and
simple and if you like quick fast cards
like this there is an entire playlist of
5 minute makes I've got lots of videos
on them already I'm going to be adding
to them weekly as well so go and take a
look at that I'll make sure that is
linked just here for you and if you've
not seen me before hello I'd love it if
you could subscribe too take care
everybody and I'll see you again very
soon