✨ Want to make cards that look like you spent hours—but only take minutes? Let. me show you the easy shutter card trick using simple paper strips. It’s a stunning background you can decorate with ephemera or die cuts, and it's perfect for any theme! One technique, endless designs—you’ll want to use this one forever! ****DON'T FORGET TO LIKE 👍 and SUBSCRIBE Join our Facebook Group to share your creations at Village Card and Crafts
Have a question or suggestions? Drop me an email at [email protected]
If you would rather drop a card in the mail... Village Card and Crafts PO Box 1003 Lady Lake, FL 32158
As an Amazon Associate, I earn from qualifying purchases. By shopping my links, I may receive a small commission at NO ADDITIONAL COST to you. Thank you for supporting me as a content creator:)
Want an easy technique that looks like you spent hours working on it?
Let me show you how. Let's get crafting.
When I look around my craft room, the one supply I have an overabundance of is white paper scraps.
That's what I'm using today. And these are all off cuts from my organization and storage method.
So they're all about the same size, but it doesn't matter what you have.
I'm going to be cutting these down to half inch and three quarters of an inch.
You want to stick with the same size for one card.
So if you start off with half inch, do the whole card in half inch.
I'm going to show you lots of choices here and lots of different variables.
You also need something to stick them onto.
So I'm using a 65 pound card layer.
This is recollections cardstock. It's not anything special.
You could use a little piece of copy paper. You could even use a piece of junk mail.
But this will work. This will be thoroughly stable by the time we're done with it.
My preferred adhesive for this is a liquid adhesive.
And I use Barely Arts precision craft glue.
But use what you've got in your stash. Even if it's Elmer's white glue, it'll work.
Now I'm going to be starting at the bottom.
And I'm using the half inch strips to start with.
And I'm just making sure that I've cut them the right width.
They are four and a quarter inches in length by one half inch.
Now I'm just adding a line of glue. It doesn't have to be a huge amount.
But I just want to go ahead and get that stuck down.
I'm going to put a couple lines so I can get ahead of myself here.
But I'm going to line it up to the base of my card.
Pretty simple. Everybody can do this.
Now I'm going to tap my cardstock with the paper strip directly onto my glass mat.
And that's to kind of true up those edges.
Now from here on out, I pretty much will almost always add the glue to the strips.
These are the small half inch strips.
So I just find it's a little easier there.
And I'm using my fine needle nose tweezers that I got from...
what is that?
Freight Harbor ages ago.
They're my favorite ones.
I like them better than any craft tweezers I have.
And I'm just going to shingle my layers across my cardstock.
So I'm going to speed this up because, well, it's all the same thing.
If you enjoy making cards with that clean and simple look,
this is a perfect technique for you.
It's also perfect for anybody of any skill level.
And it's using up your supplies.
So this is a winning technique.
And I make a lot of cards like this.
Doesn't look like much, but it's going to be a beauty.
It works for either direction.
Now this is the three quarter inches and you could use it again in either direction.
Now I'm going to be using my Scrapbook.com nested A2 rectangles.
And I'm going to be creating a frame.
I'm going to show you a couple different ways of how to do this.
But I'm using my glass mat to kind of line up that frame.
And to keep the pieces in exactly the same place for multiple die cuts,
I'm using some Lotak tape.
This is Scrapbook.com's mint tape.
It is my favorite Lotak tape.
I've never had it tear a piece of cardstock ever.
I'm putting it face up because my cutting edge on these dies,
although it's hard to see, is actually face up on the glass mat.
If you're working on it with the cutting edge down, then attach it to the top.
Now I've used my mint tape in all four corners because I don't want there to be any shifting.
I need to make multiples with the same frame.
So I'm just lining it up.
This is a scrap of 65 pound weight cardstock.
I actually really suggest that if you have heavier weight cardstock
to go ahead and use the heavier weight for this.
But if you don't, it will still work fine.
You just need to layer up multiples.
I am layering up two pieces of the frame together.
There's definitely no rules when it comes to this technique.
If you want to add a third layer of frame, go for it.
But I'm going to go ahead and add glue to my edges of the actual shuttered part of the card.
Could be shingled, could be shuttered.
Just depends on what you call them in your part of the world.
But it does remind me of a window shutter.
And I'm going to hold that down with a acrylic block.
And I'm going to go ahead and make my second frame.
Now this frame I'm going to use on the shutter card
with the three quarter inch shingled paper strips.
And once again, hold it down.
Now this is perfect for die cuts.
I am using this Tim Holtz Vault Wreath.
I think it's called Vault Funky Wreath if I'm not mistaken.
I'll have to look it up.
But I've already cut out a few and I didn't do anything really
other than add a little distress oxide to it to kind of grunge it up a little bit.
But it doesn't matter.
If you don't have ink and all you do is die cutting, no problem.
You can do whatever works for you.
It's glued on.
I'm just going to finish it up with a simple strip sentiment
which I will share with you at the end.
Moving on.
If you have trouble lining up your strips, you can use a stamp positioner.
Or in my case, I'm using a scoreboard.
Mine is 12 by 12 so I find it's easier to use.
And I've just shoved my card panel right into the corner using my same glue.
I'm starting off with the same thing.
I'm adding some glue to the top of my piece of cardstock.
And I've put it up in the corner and lined up my first piece of strip.
Now I'm just adding glue to a small portion of the base of that strip
and adding a strip to the top of it.
And we're going to continue this until we get to the end.
I like the 3 quarter inch because it doesn't require so many strips.
And it does prove to be quite fast.
I understand that I've sped this up but I can knock these out in,
oh, 15 minutes and I can have a couple of really beautiful cards.
Want to make a bold statement with your scraps?
No problem.
I made this one in rainbow order.
And don't worry about the edges.
We're going to cut those off.
It's not going to be a problem in the long run.
So I've made lots of my bases.
And now I need to make the topper or the frame portion.
We can use the same frame we did before but let's do it in an easier way.
I'm going to separate these frame pieces but I am going to keep
my mint tape because that is useful for the next part as well.
This time I'm only going to use the smaller frame.
And I'm simply going to line it up against my A2 size card panel and cut out the center.
What could be easier than this?
It doesn't really matter that the edge isn't going to be die cut on that outside edge.
Trust me.
It's not going to matter in the long run.
But if you really like that look then go for it.
Now my tip for using lightweight cardstock and getting multiples
is to simply use that same low tack tape and tape two or three pieces together
along with your die cut.
That way when you put it through your die cut machine it goes through all the same layers
in the same spot at the same time.
You might have to run it through one or two times to get it to go through all those layers
but then your frame will be the exact same frame for all three or two layers.
Whatever you choose to do.
Now I wanted to put my heavyweight cardstock to the test so these are cut from 100 pound
accent opaque cardstock.
This is what I make my bases with and I've only cut one.
I've added glue to the frame instead of to the actual card and I have lined it up and
pressed it down.
And it looks great.
If you want to get fancy with it use a fancy die.
Now this one is a Spellbinders scalloped edge frame and I'm going to cut it out of the center
of my heavyweight cardstock.
Wait till you see how much this changes your shingled card.
Run it through your die cutter and don't don't throw away that piece.
You can use that for another card.
Add it to your shuttered card base and it's going to give you a completely different look.
Don't have dies?
No worries.
If you use a Cricut or a Brother ScanNCut anything like that would work to cut your
simple shape out of the center of a piece of cardstock.
This one's an oval on that rainbow base.
It's super cute.
Now let's decorate.
I'm just going to trim off just those overlying edges and no one's going to ever be the wiser
that it's not exactly four and a quarter by five and a half inches.
Now this is a great technique for using up extra ephemera that you might have lying around.
These are Tim Holtz layers.
Layers are a little heavier than paper ephemera and I've used a scallop cut edge for my frame
and I'm just trying out a few pieces to see what I like.
But there's lots of options here.
This is a botanical set.
I love that little birdhouse and I do use it but I don't think I use it on this particular card.
If you've got butterfly die cuts this would be fantastic on as well.
That's a swag.
But there's lots and lots of choices.
I like this one and I'm going to stick with this one
and maybe it needs this little tiny butterfly as well.
While I do use foam tape I don't use it a lot.
I tend to use my paper strips.
I find that foam tape over time will dry out and kind of crack and flake off
but if I just glue my paper strips to the back of my pieces of ephemera or die cuts
then I can build up that height and use a scrap as well without having to buy a whole other object.
I've added a stamped die cut to one of my shingled pieces
and I'm just adding some glue to my butterfly and this one is done.
Now don't feel obligated or rushed into putting a sentiment on a card
if you just don't know what it's going to grow up to be yet.
Leave them plain and then add your sentiments later.
Now I might go back and add some glossy accents to that cake to give it a little shine
or maybe some sequins.
I use my die cut noel word in metallic cardstock to cover up a smudge.
Now don't go just yet.
I've picked out some great videos that I think you're going to love.
Until next time, I'll see you real soon.