Rescued! WITHOUT refinishing!

Thomas Johnson Antique Furniture Restoration
41 followers
133 Video Views·Jan 25, 2025
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine, restores this handsome nineteenth-century writing slope and family heirloom. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, or write us at [email protected]. And for those on the east coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson Thomas Johnson antique
furniture restoration in gorm
Maine in the 18th and 19th centuries
writing slopes were very popular now
note in this video I refer to it often
as a lap desk and I've since learned
that that's not correct the proper name
is writing slopes thanks to my friends
from Great
Britain and of course writing slopes are
still being produced today but not in a
box form our laptops and our Tablets
still follow the same idea this video is
a good demonstration of the knee repairs
along with some structural repairs it's
the kind of detailed job that I like the
best it's also a good demonstration of
how you can do extensive repair work
without
refinishing enjoy the video uh subscribe
like share I appreciate
it this is a nice little uh lap desk or
a writing box in other words it opens
up and has a writing surface and then a
place for your ink bottle uh all your
writing
implements and places in here to keep
your uh paper and writing
supplies most of these writing boxes
that I've seen are like late 18th uh
early 19th century but we we know that
this box was made uh shortly before
1919 by a cabinet maker named Oscar
hucker and in the top you'll see these
initials EB and those were for his then
uh fiance and future wife Emma
Borowski uh this box now belongs to
their grandson and it needs some repair
work the hinges have all come loose the
screws have been torn out there's veneer
repair
and U he requested and I readily agree
that we really not attempt to change the
surface of this too
much now I'll begin as always you know
taking this apart noting what's broken
and even while I go along glue down
loose bits that I come across
this will need a screw with a larger
head this area here where these Hing is
attached is the most
damaged let's start with this one cuz we
have the piece
looks good I just got a patch in
there now I feel pretty confident that
this is a
Rosewood
uh let's look through the veneer see
what we
got here are the three here's three
types of rosewood
I'm pretty sure I've marked these
correctly this piece from the interior
gives a pretty good representation I
think this is the same as the outside
and this Honduran over here has got the
lightness and the stripes I think it'll
work I think I'll just wet this surface
a little bit just with a little bit of
water see if I can see the grain a
little bit better there's a little bit
of a stripe there stripe there you you
can see that this side of the box is
well you may not be able to see is is a
book
Matched not really a little bit of
figure a little bit of a cathedral
pattern going on there
I'm kind of liking this area of the
veneer it's it's light but it's got a
stripe in it
not bad for first cut I think I need to
take a little bit off right
there off camera I cut a new piece and I
made this
uh part here a little bit different of
an angle it fits really
well I noticed the old veneer is a
little bit thicker than my new stuff so
I'm going to use that first piece I
cut
underneath this area is so dark but it's
right it's right below the LA the bottom
of the box I just did I'll use the same
veneer here
just like before you can see I'm
doubling up the patch
I'm putting a lot of pressure on these
little patches cuz I really want them to
be level with the existing
surface oddly
enough this area didn't need two layers
all right while I'm waiting uh there's a
piece of inlay missing on this interior
writing
surface this is a box of inlay from my
father's shop which really what became
my oldest brother's shop uh and it was
in business for uh 80
years this is what I'm looking for
I found another one
here oh that is the right size it's
great for
this is the another uh interior panel
writing surface where the hinge is
attached to this it's really messed
up if I glue this back
together then I'll still have to redrill
and plug these screw holes which will be
exceedingly difficult to do without
damaging
it I think I'll work epoxy putty in
there and then clamp it I don't like in
fact I never put screws in the putty but
I think for this particular application
it's such a lightweight application that
it'll work fine I'm going to sneak a
little hide
glue under this veneer right
here do the same thing here I'll get
some hide glue down in there see if I
can't get some of this putty down
there here's a whole Corner coming
loose well I feel like I've got
everything I'm sure I'll find something
else tomorrow we'll see
I'm going to wipe off the uh excess glue
there's only a little there with some
water so my new wood is slightly above
the old surface it's funny because of
the shadowing it looks worse than it is
but anyway that's what I wanted it to be
slightly above I'll see if I can pair
this down level so that I don't have to
sand and then I'll hit this try just to
hit my new wood there with a little bit
of
220 and of course I have to do this Edge
and round this over
the piece broke while I was working on
it I should have left the tape on
it all right good I'll clean off this uh
excess glue and then I've got to cut
that Keyhole there
and I'll seal this area with a little
bit of
shellac I've got to seal this
area this is that inlay I glued in
yesterday and it's a little bit proud of
the surface I need to level it off
now I'll seal that new piece of wood
with a little
shellac all right we're uh ready to
start assembling this like all jobs like
this I may find more repairs and loose
veneer along the way but we'll see what
happens this this hinge goes here so I
uh need to take it off install it on
this piece and then put it back on here
this is one of the hinge areas I glued
up but you can still see where the
original holes were I think I'll mark it
out though and redrill
I almost forgot I'm missing some of
these screws let me see what I
got now here I am poking through my
miscellaneous screws and I discovered on
the Shelf I have 38 number twos
brass right here
uhoh this won't
close it's hitting right
here both this front board and the back
board have have warped slightly uh
inward decreasing the dimension
here but uh I have an idea I'm going to
spread this a little bit and just put a
a piece of wood in there to spread it
apart see how that works
H that's not
bad what's odd about this is that there
doesn't appear to
be any provision made for how you open
this there's nothing to grab onto and
you can see where people have chewed it
up trying to get it open with a
fingernail like I'm trying right now so
I'm not quite sure what to do about that
if it were mine I'd add a felt tab from
underneath to pull it but I'll to to
talk to the owners about that this
board's helping it's not glued in it's
just there
so that'll be all right for the time
being now onto the lower section and
I've still got some uh a patch to trim
and uh glue to get
off another patch there
too all right so this piece goes here
this is where we fixed these areas that
got ripped out with the epoxy putty so I
think uh same thing I'll put the hinges
on here first and then in the
box right this is got the hinges on
ready to attach but I uh realized I
forgot I still have a veneer patch to do
here
I'll seal that with a little
shellac well this is a little springy
too but it at least it fits see I don't
know what it was like before it was
broken off when it came in here at least
I think it's good enough to close the
box it makes it easier to open
that I'm going to attach the
top and see how it
works all right it closed but
not great but it's got some problems
that I think have no solution um if you
remember when I
installed this piece was when we really
noticed the for the first time
how warped these pieces are this box
both end pieces are warped in like this
too and
that's what caused the problems
here these corner pieces are hard up
against each other
there and I think you can
see how this is a sort of oval shape in
other words how wide it is there this is
Warped this board is Warped too but
don't forget I put a board in
here that board pushing it apart so that
this will
close and I realize now that that's what
broke rope these hinges out and you can
see there's stress marks here now it's
being stressed right
now there's really no solution here you
could put on hinges with a longer leaf
and separate these but if you did that
then the lock would never line
up I think I'm going to have to be happy
that it just goes together that far uh
and it's okay it's not supposed to be
made functional I'm just going to go
over it now I've got some white spots
here I want to get rid of I got to put a
little bit of color on my patches and
I'll go over it with the the feeding wax
polish I don't want to use any
solvents to try to get this off I'm
going to see if the Polish might help
loosen that up a bit
this is just a little uh perfect Brown
die
stain I can see now that this area that
I had glued flat where the hinge is is
now bulging out again these hinges are
being ripped out of the sides because of
the warping of the sides
I'm going to go over it now with this uh
Orange Oil and Beeswax polish I'm going
to use a piece of steel wool but sort of
it's just an applicator I'm going to I'm
hoping to nudge some of these white
specks loose but I'm going to go very
very
lightly I'm going to let some of this
polish sit on that Mark for a little
while
there you
go nice little lap desk a writing box
it's over 100 years old built before
1917 and uh the hinges had come all all
come off these inner sections had come
off all that's repaired uh veneer
repairs here uh over here in the back
where the H was I know some people are
going to say geez why not refinish
it but uh this patina represents 100
Years of family history and I think it
looks pretty good
I hope you liked the video and if you
did please subscribe and like and be
sure to hit the Bell icon so that you'll
be notified when I put out a new video
