How Good is the Kreg® Precision Bandsaw Fence?

DirtFarmerJay
310 followers
46 Video Views·Jan 18, 2025
hi dirtfarmer J here from dirtfarmer
j.com we love having a band saw but the
original fence on this thing was a real
pain to use we upgraded using Craig's
Precision bandsa fence I'm going to walk
you through what we solved and how we
installed it stay
tuned dir farmer J here from dir farmer
j.com we love having this band saw we
use it for all sorts of things here here
it's an older saw and I'll tell you what
was really lacking was the band saw
fence it had these tubular rails that
stuck way out it was finicky it was hard
to adjust uh and uh there was a gap
under the fence and so it was time to
upgrade so we researched and we came
across Craig's Precision bands saw fence
if you buy one of these fences you can
use this video as a stepbystep companion
to the installation manual I'm just
going to walk you through and show you
how it was done on this saw now the
first thing you need to find out is
whether or not the saw you have the
Craig Precision band saw fence is
compatible with it well you can download
or go visit their uh their website and
look at this compatibility chart and
it'll show you exactly what needs to be
done or if it can be fitted onto your
saw at all I went to Craig tool.com and
purchased this fence and when it arrived
it came pack packag very nicely you can
see how well it's packaged and it's
labeled very nicely with great graphics
kind of uh sets up the expectation of
what you're going to enjoy once you get
the package open and also notice that
the tool is made in the USA now I live
in the US and I like to support our
industrial base and we think that
whatever country in if you have the
opportunity to support your industrial
base you should do so for those of you
that live here I think it's pretty cool
uh that Craig tools are made entirely in
the unit States actually in Iowa so uh
the tool once you open the box and start
looking at it uh the parts are very very
nice um uh mil very nicely robust uh
it's pretty significant and weighty uh
so this is not a flimsy tool it's
WellMed fit and finish is very nice uh
the next thing you need to look at once
you take the parts out is there is a
registration card there uh and there's
also uh a little a newsletter card in
case you want to get more information
about other products that the company
does that's all provided for you there
now we need to prepare the machine to
install the new fence system the first
thing we need to do is remove the blade
then we're going to be able to raise the
guide here and then slide out the old
fence which by the way was one of the
irritating things about the way it was
set up is that you could not uh take the
fence off of put it on the outside over
here without removing the blade first uh
that's been solved now but now after you
remove the the blade you remove the old
fence then the next thing you need to do
is to remove the guides which stick out
pretty far out here which I've had one
or two kidney punches in here that's
been eliminated as well so we remove the
rails and now we're ready to start
installing the new parts once you've
stripped off the other rails you now
have bolt holes uh threaded bolt holes
that you're going to reuse but to know
where they are to help you mark out the
new rails you need to put pencil marks
on the top of the table in line with
those here so I marked on the tabletop
in the two positions the center line of
the bolt hole below it once you have
that you're going to use bolts either
the ones that Craig supplied in the kit
or the ones that came off of the machine
here it's your choice choice I opted to
use uh the bolts that came with the
machine the heads were a little bit
shorter and it allowed more clearance
you choose what fits best for your
situation once you've got the bolts here
you're going to go ahead and thread the
front position in it is the fix point
that you work against and now you're
going to swing the fence uh up or not
the fence the guide up into position to
see where it falls in alignment with the
second hole and because you have a Top
Mark you can see whether or not it's
going to thread in my case it was
slightly misaligned enough that you
could not insert the bolt so what I need
to do is Mark the center hole take the
um the the uh guide here off and then re
out or file out the hole elongate it
until I could get the second bolt to
thread through you may need to do a
little bit of trial and error uh if the
rail has a misfit it took me a couple of
attempts of filing out the hole
elongating it until I could get this to
freely mount on there now the reason you
want it not to be in a bind when you
tighten it is that you're going to need
to uh set how far the rail is down over
the edge uh below the plane of the table
a certain height so that this rail or
excuse me the whole fence sits at the
right place so uh to determine that uh
then set a in this case I use a
combination square is a little depth
gauge so that the front of the rail and
the back of the rail were both the same
distance down from the plane of uh the
tools uh table here I wouldn't drive the
bolts in hard at this point it's likely
that when you install the fence and the
fence clamp block and all that that you
need to adjust all this to get it all
calibrated you're now ready to go to the
second part and that is to build the
clamp block this is put together using
using the parts in the part bag uh use
the diagram everything there is very
intuitive I had that whole thing put
together and well under 5 minutes and
now was able to mount it over on the
rail and start to install uh the
fence and at this point now you need to
square uh the block to the miter gauge
slots on the table uh and the distance
to your um to your blade itself
so everything is here ready to go you've
got both bolts that allow you to tweak
it left and right so that's Square along
the side here plus height adjustments to
raise and lower the fence itself all
right now it's time to install the tape
indicator that tells you right here uh
what distance or what width of cut
you're going to end up with if you run
stock against the fence and through the
blade here uh to do that the first thing
you need to do is raise this uh section
here the guide a bit bring this over
till it touches the blade uh this is all
with a power turned off and it not
running of course you're going to bring
it over and then uh on the little cursor
indicator down here use the red line
that is used later on for precision
tuning and on the end of it put a mark
on the side of the Extrusion of the rail
and that allows you to set the zero
point you're going to put down your tape
with the zero there running off counting
up as it goes further away in my case I
got almost 21 in of the tape used here
uh and that gives you the first rough
Set uh once that is pressed in place
starting from one end and removing the
backer and moving down to the other end
now you're going to come back and
fine-tune it to final calibrate this
then what you're going to do is run some
stock against the fence uh through the
running blade and then measure that
precisely and adjust the cursor uh over
here till it gives you that readout
always use the actual object that was
cut to set the gauge to now you've got
uh everything calibrated here uh this
has been set Square also uh going back
along the miter gauges this has been set
this way to know the distance is correct
now the only other thing that you can do
is what I would suggest is their micro
adjuster this is a uh an option but this
is already set up to accept it literally
it took me about a minute to install it
so by installing the micro adjuster
let's suppose you're just slightly off
you're you know a 64th off and you want
to be precise like cutting some
dovetails or um on a tilt or that sort
of thing um so what happens is you can
literally micro moove the fence with the
out the old bump thing you're able to
loosen the fence spin the dial it'll
move it just minutely lock it back in
and you get very precise uh measurements
and cuts that way now there's one other
feature you should know about and that
is there are times when you don't want
this tall of a fence you want to be able
to use the low fence here you can see
you can slide it out of the keepers the
holders on the fence block reverse the
fence and then put it down as a low
fence now that that means that the
measurement calibration will no longer
work in that mode because it was sent to
the most common vertical uh fence
orientation here but that gives you some
resaw capability or thin strip or
anything else that you may need that low
fence setting for we've been very
pleased with the results here gone are
the days of kidney punches uh bumping
the the um the fence into position
having things go under the fence this
has been a real upgrade and we're really
pleased with it at the time of purchase
it was about
$140 we bought Ours from Craig tool.com
but you can get it from other
woodworking suppliers uh including
Rockler either online rockler.com or one
of their retail locations if you're
fortunate enough to have one nearby this
tool is readily available and there's
parts and accessories and Craig offers a
lot of other great tools you should take
a look at like we said this has been a
great upgrade to this band saw but it's
one of many check out this episode where
we show you six other great upgrades for
this saw that would also work well on
your saw check it out you're going to
like what you see there until the next
time this is dirtfarmer J from
dirtfarmer j.com really enjoying this
saw setup with this new band saw fence
