Stabilizer Hacks You Should Know

The Technology of Old Crossbows
4 followers
3 Video Views·Sep 23, 2025
Stabilizer Hacks You Should Know
Today we set out to answer one of man's oldest questions. Does size really matter? Let's go.
Does size matter? Does stiffness matter? Both probably irrelevant depending on who you ask.
Have you visited your doctor lately? Now today, today we're doing all things stabilizers.
Josh, if you and I were looking at a bow and we're just like, what's a good starting point
typically for a hunting bow? If you're going to use a dual bar setup, my personal recommendation
is one and a half times as long as it is off to the side. So if you're 15 here, you're 10 here.
In general, now that's going to be different for everybody and whatnot, but that's a good starting
point. Twice as much weight back here as you have here. Every bow is going to be different in how
that positions, where that feels best at, but if you're going to start somewhere, that's usually
where you start from. What I would add to that is, I would hunt with the longest front bar
you're comfortable hunting with. If you can hunt with a 15 and that's mobile enough for you,
that's cool. For sure. If you're only shooting from a tree stand, maybe you only hunt with a
six or an eight out front. And I have a little stabilizer hack I want to share with you guys
that I think is an excellent option if you're not trying to launch bombs while you're hunting.
Longest bar you can handle. The length of the bar allows your weight to be just a little more
meaningful. Longer the bar, couple ounces has more effect. Personally, when I'm trying to determine
how long my front bar should be, as long as it's comfortable for me, I try to make sure I can just
clear my elbow area somewhere in there. So if you're holding on to your bow like so and you're
bending it, as long as it doesn't protrude much past that, it's not going to be more awkward to
get into. But you know, when you're carrying it around, I mean, I have long arms, I'm a tall guy,
but that's what a 15 with a quick disconnect and an additional base. So from here to here is
probably like 16 inches. As long as it's not like tucking up into your armpit or whatnot when you're
carrying it in that fashion, and you can keep it along the lines of your elbow, it's not going to
be super awkward in thick terrain. Now, if you're in open country, I mean, last year, I want to say
my open country hunting bow, I had a 18 inch or 19 inch stabilizer on there because I'm constantly
walking around like this, loaded, right? So if I'm in open country, I'm not going through thick crap,
I'm constantly walking around just like this. So as long as my stabilizer is not longer than
my bow is before I draw the bow back, I really don't see the harm, personally. And by moving
this farther away from you, you can put less weight here, but it feels heavier. So you don't
have to carry around as much weight, but it feels way more effective, like Tim was pointing out
earlier. So those are just a couple of thoughts on the best way to try to determine what you want.
That's what I like to do. First of all, very proud of Josh for being willing to share his
front bar length with the internet. We are going to hop in and do some fine tuning on my bars
on both bows because I know they're just not quite there. And the reason I know that is because
often when I'm shooting, you'll see the top of my bow just a little wavering back and forth.
And that's because my bubble isn't quite where it needs to be. And then I end up focusing on my
bubble when I should be focusing on my shot. So we're going to dial it in. You into those?
Well, yeah, it is peach. Peachy keen. You just get me.
I just know that we can give our very best content with just the right level of caffeine.
I just had a nice coffee, so I might have a heart attack.
Easy now. Maybe you don't slug it. Maybe you don't slug it.
After last week, I need the extra kick.
It tastes so damn good. Oh, get down, get down, get down, get down.
So Josh has this little trick that's kind of like witchcraft. Kind of want him to take it
away and share it with you guys. There's two schools of thought when you're trying to
balance out a bow with stabilizers. One is to get the bow to sit balanced all by its lonesome
without your influence into it ideally. And then two, some people deliberately put pressure into
it. So it kind of forces what's the word bias into your grip to kind of force you to hold steady.
That's more of a target thing. So we're going to try to show here is how I try to set a hunting
bow up, standing on uneven terrain, awkward situations, etc. The bow's trying to balance
itself and you're not trying to influence it. So you want to interrupt this fine production
to tell them about your big promotion or whatever you got going?
Yeah, man, I'm on the road to 100,000 subscribers.
They need to hit that subscribe button. Help me out. I hustle every week and I try to put
out the best videos I can. Don't you feel like these people you expose yourself to every week
are getting a little sick of your quirks and shenanigans? First of all, I will expose myself to
whoever I feel I need to. And shenanigans? Yeah, maybe a few. It's fun though. This is supposed to
be fun. Making videos is fun. Isn't that what we do? Fun? For the love of it all, quit yapping.
Stop it. Let's get these fine folks back to the video.
You don't tell them back to the video. Let's get back to the video.
Go ahead and give it a pull back here. Give it a pull. And do I close my eyes?
Yes. Close your eyes. Actually, no. Draw the bow back and get it level. Anchor in, get everything
level. Okay. Do me a favor, take your finger off the trigger so you don't accidentally kill me.
Close your eyes. Okay, now open your eyes. What's the level look like? Level's way right. Okay, so
your bubble's right. Okay, so that means your bar's kicked out too far that way
for a natural position and trying to do balance. So we'd want to bring it in a little bit or remove
some weight off of it. If you like the amount of weight that's on it, you're simply going to bring
it in a little bit. So this little guy, can you hold her there? You got it? Okay. One of the reasons I
wanted to share this with you guys today is because I feel like stabilizers are a bit of an odds
multiplier or a hack that can help you hold better, shoot better, more consistently. And that's become
apparent to me shooting my target bow more. It's like those things really matter to get your bow to
hold just so. Anchor in, get her level, get your finger off the trigger please. Thank you. Say when you're
good. Good. Okay, wait for it to start moving, stop moving, then open her up. What do you see? A smidge bubble right?
We probably need to come in a little bit more. That was maybe a third of how far out you are
from square. Try again. Uno mas. Now when you're good, let it balance out and open your eyes. What do you see?
It's very close. It's just inside. Still right? Yeah. Okay, and that's where when you start
doing this, people will naturally point their bar at an angle because they see it out like that, but
it won't sit like that. It'll, that's putting bias into your hand. You end up bringing these things
in a lot, which is where I tend to run my bars is more in because it's naturally just sitting there.
You can't get your bow to stop moving at some point, you can put some bias in it and that'll
help, but in general that's about where you want it. Yeah, I haven't run a bar in like this in a while.
Well, you probably haven't done this test in a while. I've probably been misbalanced. Yeah, I haven't. Well, it just depends.
Having your bar out at an angle on purpose can help you get steady in your hand, but it's not
going to help the bow sit level on its own, and when you're on an uneven terrain situation and a
hunting situation, if the bow is balancing itself, you're likely to keep your bubble in square at
distance, i.e. a situation where you're not paying as much attention to what you're doing. It's like in
the same spot where it's inside the lines, but it's on the right side, so we don't have
too much more room to go. No, a little. See what it does. See that there? Yeah. We ain't there yet.
Rotate 90. There you go. Well, I think what you're experiencing here is the bow's already pretty
balanced without a sidebar. The way this sits right now, I mean, we're going to check it out. This should
be very close to balance. Instead of running my stabilizers like this, I'd probably consider an
offset bar as maybe a better option, depending. Which the new model is almost in stores. Yeah, it's awesome.
I haven't ran my bar that far in in a while, so I'm glad we checked for you. Now, we're also going
to double check that on my target bow, because I think the target bow needs a double check, and it's
just like a different tool. I want you guys to see. Well, long bars. 15 and 10 with 3 in the front,
5 in the back right now. Trooper Supra. Trooper Supra. Supra Trooper. Supra Trooper. Supra Trooper.
Hey, get over here. I don't think that's a Star Wars reference. I think that's a Super Trooper's reference.
Glittering ends. Glittering ends. Glittering ends. Glittering ends. Smoking the reef here.
Officer Raven and I are going to sit here while you guys eat the whole bag.
Okay, so here is my long bars of destiny on this. This is 15 on the back, 33 on the front.
Definitely compensating for something. This is absolutely the definition of compensating for
something. This is the example of what putting bias into your grip would be. By putting that
bar out at such an angle, if you didn't pay any attention to what your bow was doing and didn't
try and manipulate it, it would literally sit like this, right? And that would not be accurate. But
how that tricks is it forces pressure into your hand that helps steady you, believe it or not.
This is an example of deliberately biasing your bow to try to get it to shoot. Now, the concerning
thing about bias, why you want to try to avoid going too far over, because the farther you go,
the more you'll feel it in your hand. And once you get used to it, it does tend to steady it up
a little bit. So it makes the bow a lot harder to tune. By the farther you move this over,
the farther your left-right tear you're going to get. There's no way around it. Because you're
deliberately torquing the bow. So as it goes off, it wants to whip back the other direction because
of the way the weight sits. So just be cautious in how far you run this and be aware that every
time you move that left or right, you're going to retune the bow because it's literally putting
more torque or less torque into it based off of the position that you put it at.
Yeah, and I even find that when I do move that, I'm also, I also then have to remove my sight
because it actually changes my point of impact. It does, 100%. Like a good example, I, third day
of Vegas, I had gotten so desperate to stop, get the chaos to stop because it just kept moving more
and more and more and wouldn't stop. I grabbed somebody, I borrowed somebody's wrench on the
line and moved my bar over a bunch. Screw it, I'd rather just try to do something than, and if I got
a re-sight in the middle of it, I think it was on round four, I moved my bar over 20%. It moved my
impact point that far at 20 yards, my pin moving around a lot less because it put pressure into
my hand and kind of forced a little tension into your forearm and your grip because of that bias.
So bias can be a really good thing. I just don't really recommend it in a hunting bow
because of the uneven terrain issue, random positions, trying to be off balance and hold
the bow. If the bow balances itself in that scenario, I think you're better off. But in
a target situation, in a world of maker shot controlled environment, no issue of putting bias
in your bow. And that's exactly what we've done here. Different tools, which is why I wanted to
also have this bow in here a little bit. Speaking of bows, target bow, hunting bow, budget bow, that's
coming soon to the channel. We're just kind of weeding through like who makes it into the first
round of budget bow cuts. So if you have a budget bow you'd like us to check out, drop it down below
in the comments. We're going to weed through them and see, I'm going to see if I can make the best
possible budget bow I can make this year. And maybe we agree on it, maybe we don't.
Definition of budget bow, by the way, is $650 retail price or less. Okay. Because we have to be
able to add equipment to it to make a thousand dollar bow. Yeah. We're trying to make you a
thousand dollar bow the best way we could possibly do it. I guess I'll just give it a drawback and
tell me if you think there's anything you see. Well, yeah, let's not shoot it for a hundred in here
or whatever squatch length you were shooting there.
So one, I would probably incorporate a finger sling so you're not grabbing your bow when it
goes off because you are. What those are for at any time you manipulate, it's a timing issue.
So if you touch the front of your riser and the arrow hasn't fully left here, you can be
manipulating outcomes throughout the riser. So that's why I use a finger sling when I'm using
something like this. No, I can't drop it no matter what. And you still, when you have a lot of bias
in it, it's going to shove it into your hand and you're naturally going to kind of react to it.
But the hope is that the bow arrow's gone before your reaction exists, which is harder to do without
a sling. Two, you could probably bump that bar over a little bit because you don't have a whole
ton of hand pressure in there and might actually steady up a little bit by moving that over a
skosh. Go ahead and shoot. More to the left? Yeah, just a little bit. Can you shoot another one for
me? And try really hard not to touch that front. I want to see what the bow does when it goes off.
Ten-four. It sits pretty good. I mean, you're not getting a whole bunch of whip. I like your
balance. Like, the bow goes off and it goes forward and then rolls down. It's not like whipping really
hard down or whipping really hard back. So you should have good physical weight load from where
you have it on the front and the back and where that sits. I'd probably just move your sidebar out
a little bit. Outside of that, I don't think I'd change it. Like, it looks good. Yeah, that's cool.
It feels pretty balanced to me, but it's always good to check. Shooting paper, shooting scores a
lot with my target bow makes it a little easier for me to judge, hey, did this help? Did it hurt?
Are my scores getting better? Is my bow holding better? Might be a little easier to assess with
this. An offset bar, which I do believe to be a little bit of a hack for keeping your hunting bow
streamlined. It's the same offset bracket I used on the Bear Adapt Plus when I tested that and I
got that bow to shoot it as good as I could. Offset bracket, pretty neat little idea. I'm actually
surprised. Very few people know about this. I think most people that hunt 50 yards or less,
this is perhaps the best option. It's pretty simple. So it mounts where you'd normally mount
your stabilizer and move your stabilizer mounting hole over. So you take the same amount of weight
that you had. You're not adding an additional bar. You're not adding additional weight other
than the bracket itself, which barely weighs more than a wrist sling bracket would on its own
and moves the weight over. So when you hold the bow out, it actually sits relatively level without
adding an additional bar to it. This is simple, easy, not expensive, and I have a brand new model
of this coming out. Well, it might be here by the time you actually make this video and put it out,
but we'll have a little quick disconnect built into here so you don't have to unscrew it all
the way off to get it off and put it in your case. I'll make sure we show that because it is a
contender for me to use and hunt with, and if you're a person that's going to strap it on a
backpack or throw it in an ATV, this just makes a much more streamlined package. Getting in and
out of rigs, it makes a big difference to not have that extra mass in there. I did gripe about that
a lot this last year, always having two bars, and I was always taking one of them off to get in and
out of somewhere. It was a pain in the butt. It's a simple idea and it just flat works without a lot
of expense. And not that many people know about it, so I figured I'd share that with you guys.
Cool thing about archery is it's not a one-size-fits-all program. It's a kind of
choose-your-own-road. So you could set your bow up simply with an offset bracket. Pretty cool.
Contender for me to put on my hunting bow. You can make it as balanced as possible,
like most hunting bows should be set up, or you can set it up like the target community guys,
gals do more, have a little bit of bias. Where it wants to do this, but it forces you to do that.
Yeah, you lean into it, creating a little more stability with a little more pressure.
It's noticeable. Yeah. So guys, Josh has a YouTube channel. Go check it out. I'm on the road to 100,000
subscribers. It would mean a lot to me if you'd subscribe to the channel. We're going to knock
off Brandon McDonald on our way there. He's actually trying more. I don't know what you did
with that, but man, you got a little fire under him. I haven't seen him post so much crap in the
last 30 days. Oh my goodness. Hi Brandon. I know you're watching. And we're going to attack San
Antonio to shoot with the ranch ferry. Will he be shooting 700 grain arrows? Will he be shooting an
easy B site? I don't know, but it's going to be awesome. Going to find out. I look forward to
hanging out with friends that like to shoot bows and it's going to be a great trip. So in conclusion,
does length really matter? You'd like to think it doesn't, but oh, it does.
For archery friends, we'll see you back.
