Working on Echo Weed Eater Motors - Why Do These Rings Keep Breaking????

My Brother Donnie
258 followers
3 Video Views·Jan 13, 2025
Okay, y'all. We're working on some echoes today. Right there. PE2620s. So all of these are the same.
2620. So I'll pull this one down because it's got low compression. Bam, I see that. I'm like,
hmm, what the hell did that? That's weird. So here's the cylinder. You see inside the cylinder
That's weird. So I'll pull this one down. Same thing. I'll pull the muffler off. Lo and behold.
Bam. Ring's missing. Huh. That's weird. So I've got this one in the shop. It's the same thing.
I'll pull it, the muffler off it. Look, bam. It's missing. It's missing the exhaust ring or the
compression ring. So I've got three of these right here with the same problem. I've got another one
right there I'm going to pull down and I've got another one right there I'm going to pull out.
And let's see what the odds are that I've got five machines with the same problem. I don't
think so, but I checked the compression on all these and they're holding 60 pounds. I'm like,
how the hell does it go from 100 to 60 that quick? Now I get to looking and every one of them,
the piston and the rings has been compromised, which 300 bucks a piece,
that would kind of kick you off a little bit. I'm going to go ahead and knock the top out of this
one. Let me see if I can put you all over here. I want to take that head off real quick. The
cylinder, as some people refer to it as. This one here, if you look at it, it looks fairly new.
Same thing. The bottom ring grouped all well and the piston has been busted there inside. But
believe it or not, this cylinder looks extremely good. It's good to run that cylinder as well. And
the pieces are gone. Pieces are not in there. I believe this is the muffler that come off of that
one. Yeah, the pieces are in the muffler. Right there's a piece of ring that just fell out. So
yeah, all the pieces went in the muffler as it was running. Huh. What's the odds? What's the
odds? Let me pull some more down. I'll show you the serial on this one too. I'll show you it's
the same thing. But we'll pull these other ones. Okay, y'all. This number there on top, I lied to
you. I only have this one left here. But this says 108 for sure. I believe that's 6E108. You
look at this. This one says 6E108. I believe they're both the same. But the trick to this
one is it's been sitting for a while, but it does not have a sticker. So I can't for sure tell you
that it's the same one, but it sure looks like 6E108, which would be the same one. It is the
same makeup of motor for sure. I've checked this one on both sides and it seems to be fine.
Everything seems to be working. It don't seem to be busted. That's the intake side. Looks like
it's good. This is the exhaust side. Come on, focus. The exhaust side looks to be good. Looks
like everything is there. The bottom of the piston should come down to the point like that.
The bottom of these pistons are round. It shouldn't be boring. That one broke too. This
one might be on the bottom of the piston where I can still use the piston. So let me pull this
off. I know I got a good head there or a good cylinder because everything went into the muffler.
I might be able to take this one and this piston, put it on that cylinder and make it work. Let me
pull this down. I can use bottom rings or top rings or something. I think I can find enough
but somebody has been in there and re-wrung it or something. I didn't do that and the pieces
ain't in there. There is pieces in the top of the cylinder up there. You see a few little pieces,
but it don't look bad. I'm going to try to put this one together. We'll get back with it.
If y'all are putting one of these coals on, that plastic washer is plastic. It's to keep
it from isolating it from the aluminum to kill it. So make sure if you're putting these on,
that you've got the little plastic washers there. You can put grease or whatever to hold it in
place, but you just got to make sure you get those plastic washers. I'm starting to put it
back together. I got it about halfway done or so. So this is next. Okay, y'all. Here's the time.
True test here. We got it back together. Let me check the compression on it. I'm going to sit you
over here. Right here. Pull. See what? Almost. Almost. Almost. Needs 90 to go. She's going to
run. We're going to put a spark plug in it. We're going to put a carburetor on it,
probably off of this one over here, and we'll be ready. Just so y'all know, there's where the
plate needs to be. There ain't no plate. I showed you that a minute ago. Double check this side.
There's no plate over there. All of them's got plates like that. That would be on the gas tank
side. So the plate should be right there, but it's not. So you see what's going on there. That's
the same motor I showed you a minute ago. We're going to put it on this hedge trim here and try
to fire it up and make sure everything's going to work right. We got this hedge trim right here
that needs a motor on it. See, these motors are different. It's a different motor. If you look,
these are ... See how that comes down and it's got a triangle there? These don't have that.
It comes down flat in the front like so. Another thing you got to watch out for,
these carburetors. See how that one's got a bolt that goes in there and you screw it basically,
whatever. See how this carburetor is? It's different. It's got this piece that just
sticks in there. See how that throttle shaft is? That's the one we stole the carburetor off of.
So this handle assembly will have to go on that machine over there instead of this one.
It's tricky. Is it that square? Yeah, it's square. Just a little like I thought. So that
should go on that. It's a Cora Necessita one. Look at this. You can see he about screwed up
and didn't even realize it. The plug there goes into that. What pistola? This? It's got to be this
pistola because the other one is different.
A little cold and I've got to adjust it up, but going. There it is.
